Working up new load

Participate in friendly board-wide competitions.
PDogRex
New Member
Posts: 13
Joined: Tue Jun 12, 2018 8:11 am
.204 Ruger Guns: Remington 700 SPS; CZ-USA 527 Varmint
Location: Lewistown, MT.

Working up new load

Post by PDogRex »

Since I have been having trouble finding Hodgdon Varget, I having been working up some loads for my .204 with
Hodgdon CFE 223.
Hornady 32 grain VMax
30.0 grains of CFE 223
5 shots at 100 yards.
Rex
Attachments
47C4D9E0-8D86-4D1B-8945-B30D6243EC3A.jpeg
47C4D9E0-8D86-4D1B-8945-B30D6243EC3A.jpeg (1.97 MiB) Viewed 8614 times
Bill K
Senior Member
Posts: 2324
Joined: Tue Jan 18, 2011 10:00 am
.204 Ruger Guns: also now, a Savage switch bull barrel in 204R. 23 inch SS
Location: Lake Forest, Ca.

Re: Working up new load

Post by Bill K »

Anymore CFE 223 is about all I shoot in my 204's. You will be happy with it. Very nice group there with that load in your rifle. Bill K :)
jwsmith1959
Junior Member
Posts: 52
Joined: Sun Apr 26, 2020 4:41 am
.204 Ruger Guns: Ruger M77 MK II Hawkeye Predator
Location: Orchard, Texas

Re: Working up new load

Post by jwsmith1959 »

I just hope I can get to a range to shoot. Nice load. I have a few I have yet to shoot yet.
Bill K
Senior Member
Posts: 2324
Joined: Tue Jan 18, 2011 10:00 am
.204 Ruger Guns: also now, a Savage switch bull barrel in 204R. 23 inch SS
Location: Lake Forest, Ca.

Re: Working up new load

Post by Bill K »

As I said all I use is CFE 223, 99 % of the time with the 32 grain lead free nosler. Works very well in my 204R and some other 20 caliber rifles, except the 20 SSC which is loaded with AA2200.
This was from a little fun shoot/contest, put on by Skipper.
received_10213565895955929.jpeg
received_10213565895955929.jpeg (44.56 KiB) Viewed 5727 times
Bill K
User avatar
terrace
Senior Member
Posts: 119
Joined: Mon Nov 08, 2010 8:26 pm
.204 Ruger Guns: MK II TARGET SS LAMINATE,COOPER PHOENIX
Location: central coast of California

Re: Working up new load

Post by terrace »

Works well for me in a 20 practical
Attachments
E745F124-C226-40AC-957D-46DE8200A076.jpeg
E745F124-C226-40AC-957D-46DE8200A076.jpeg (1.34 MiB) Viewed 5707 times
jsh
Junior Member
Posts: 65
Joined: Sun Oct 08, 2017 5:29 pm
.204 Ruger Guns: Encore, savage LRPV

Re: Working up new load

Post by jsh »

I still load some with CFE223, buddy had me try some 10X. My average group size shrank a bit, not a drastic amount but measurable. I am stuck in between the two. I like the CFE, but seems some have carbon issues with 10X.
Bill K
Senior Member
Posts: 2324
Joined: Tue Jan 18, 2011 10:00 am
.204 Ruger Guns: also now, a Savage switch bull barrel in 204R. 23 inch SS
Location: Lake Forest, Ca.

Re: Working up new load

Post by Bill K »

If you get improved accuracy and that is what you are after and want, then why worry about some carbon or soot ? Just run a damp patch in between some shots and clean the bore good after you are done, for the day.
Remember some would complain about a new rope. :D :D Bill K :)
Post Reply