Reload Data needed for BLC-(2) 204 32gr. SBK

Share information about reloading the 204 Ruger.
User avatar
p5200
New Member
Posts: 21
Joined: Wed Oct 06, 2010 8:36 am
.204 Ruger Guns: Remington 700 vtr .204

Reload Data needed for BLC-(2) 204 32gr. SBK

Post by p5200 »

I started with 5 at 26gr. 5 at 26.2gr. and 26.4 gr all with a COAL of 2.300". I shot at 50yds. just to test the loads and the 26.2gr put 4 rounds in one hole barely bigger than a single bullet hole with the fifth about 1/4" to the left of it. The outside Temp. was in the upper 80s with no signs of over/under pressure. I'm looking for mainly accuracy for punching paper. I plan to move out to 100yds. next to better test. Any opinions/suggestions are welcome the rifle I'm using is a CZ 527 Varmint in Kevlar. Thanks! :)
User avatar
Joe O
Senior Member
Posts: 449
Joined: Sat Jan 09, 2010 6:20 pm
.204 Ruger Guns: Savage LRPV,Ruger K1V,G2 Contender
Location: Upstate SC

Re: Reload Data needed for BLC-(2) 204 32gr. SBK

Post by Joe O »

Ishot that combo of bullet and powder ,out of a G2 Contender,and worked up to 30 grains,right at 4000fps with good accuracy.
User avatar
p5200
New Member
Posts: 21
Joined: Wed Oct 06, 2010 8:36 am
.204 Ruger Guns: Remington 700 vtr .204

Re: Reload Data needed for BLC-(2) 204 32gr. SBK

Post by p5200 »

Thanks for the reply, I've got some reloader 10x I think I will try next. :)
Post Reply