i have the RCBS plastic powder funnels and they seem to hold a lot of static electricity . flakes , kernals or what ever you name them of powder stick to the funnel and i have to sit there and keep tapping it to get those last ones down the tube , sometimes they just won't go down .
is there any thing that i can spray or wipe in the funnels so that this won't happen? i was thinking of taking some graphite on a rag and rubbing it into the plastic .
thanks , dan
rcbs powder funnels - static electricity
Re: rcbs powder funnels - static electricity
I just experienced the same thing last week. I just used one of the Cling Free sheets to wipe the funnel down. Problem solved. I also hung part of the sheet in my powder measure as ball powders seem to be suseptible to the static more, for me anyway. Solved the problem.
-
- New Member
- Posts: 8
- Joined: Thu Dec 31, 2009 9:39 am
- .204 Ruger Guns: CZ 527
Re: rcbs powder funnels - static electricity
I blow compressed air across the mouth of funnel if there is a build up of static electricity. It has worked excellent for me. Drawback is you need compressed air available.
- glenn asher
- Senior Member
- Posts: 840
- Joined: Wed Feb 09, 2005 6:25 pm
- .204 Ruger Guns: Savage 12fvss, CZ 527 American
- Location: kentucky
- Contact:
Re: rcbs powder funnels - static electricity
You also might try washing the funnel in dishwashing soap, then let it dry withOUT rinsing.
Build a man a fire, and he's warm for a day. Set a man on fire and he's warm for the rest of his life!
-
- New Member
- Posts: 15
- Joined: Thu Dec 31, 2009 11:03 am
- .204 Ruger Guns: none yet
- Location: Sheffield Village, Ohio
Re: rcbs powder funnels - static electricity
I had the same thing happen yesterday. I got a bounce dryer sheet, wiped the funnel down inside and out and no more problem.
Al
Al
-
- Senior Member
- Posts: 477
- Joined: Tue May 23, 2006 11:03 am
- .204 Ruger Guns: Savage VLP and BTVSS. Tikka 3 stainless & grey laminate
- Location: Ft. Sask, Alberta
Re: rcbs powder funnels - static electricity
Used to struggle with those issues and finally went out and ordered the aluminum Satern Funnels. Once you use these, you will never go back to plastic again. I think I ordered mine from Sinclairs
http://www.sinclairintl.com/product/112 ... er-Funnels
http://www.saternmachining.com/PowderFunnel.htm
http://www.sinclairintl.com/product/112 ... er-Funnels
http://www.saternmachining.com/PowderFunnel.htm
Savage Vaporizer
-
- Senior Member
- Posts: 398
- Joined: Sat Jan 28, 2006 9:42 pm
- .204 Ruger Guns: Savage mod. 116 and Custom .204 AR
- Location: East Central MO
Re: rcbs powder funnels - static electricity
Almost any time you have friction on plastic, you will build static electricity...
I started out having problems with a new dispenser and wound up taking it totally apart and wiping it down with some alcohol wipes and re-assembling it while it was potentially still wet...No problems since (almost two years)...on a rag and rubbing it into the plastic
AR
Factory/Factory
Factory/Factory
Re: rcbs powder funnels - static electricity
its half time of the football game and i was sitting there helping my wife fold cloths up and low and behold there is a dryer sheet. now its not that i'm too cheap to buy an aluminum funnell , but i am too cheap .
so i took it downstairs and rubbed the plastic funnel with it ( inside and out ) put some powder thru it .... and ''wallah'' no static cling and fresh mountain spring smell .
great idea from lenard and al204 , THANKS !!
so i took it downstairs and rubbed the plastic funnel with it ( inside and out ) put some powder thru it .... and ''wallah'' no static cling and fresh mountain spring smell .
great idea from lenard and al204 , THANKS !!
-
- Senior Member
- Posts: 1708
- Joined: Mon Sep 25, 2006 8:53 pm
- .204 Ruger Guns: 12FV, 12BVSS -S
- Location: Nebraska
Re: rcbs powder funnels - static electricity
Did you get "the look" or the roll of the eyes from the Mrs. Doobie?doobie wrote:its half time of the football game and i was sitting there helping my wife fold cloths up and low and behold there is a dryer sheet. now its not that i'm too cheap to buy an aluminum funnell , but i am too cheap .
so i took it downstairs and rubbed the plastic funnel with it ( inside and out ) put some powder thru it .... and ''wallah'' no static cling and fresh mountain spring smell .
great idea from lenard and al204 , THANKS !!
Re: rcbs powder funnels - static electricity
acloco wrote:Did you get "the look" or the roll of the eyes from the Mrs. Doobie?doobie wrote:its half time of the football game and i was sitting there helping my wife fold cloths up and low and behold there is a dryer sheet. now its not that i'm too cheap to buy an aluminum funnell , but i am too cheap .
so i took it downstairs and rubbed the plastic funnel with it ( inside and out ) put some powder thru it .... and ''wallah'' no static cling and fresh mountain spring smell .
great idea from lenard and al204 , THANKS !!
oh yeah , sure did .