Pics of your 204's

Verminator2 · Post by **Verminator2** » Fri Sep 14, 2007 8:34 am

I thought Spider said that he taped it, somewhere, but I'm not sure. I am seriously considering get a camo job like this on my next AR for yotes. http://www.predatormastersforums.com/ub ... st52593200 I think someone else had this same camo job on their AR but I can't find it.

spiderman · Post by **spiderman** » Fri Sep 14, 2007 8:47 am

Hi....the camo on my rifle is a tape that comes in sheets 2'x4' . It is Camografix brand name , think I spelled it right. My rifle has a 23 inch barrel and with the comp. is around 24 inches. Without the scope it weighs just over 8 lbs. if memory serves. I did two guns with one piece of 2x4 camo and have enough to do a small gun yet so the cost of 36 bucks for the material makes it somewhere between 12-16 bucks per gun........not bad. It is holding up well......any hard rubbed areas will turn white in time and can be colored back in with a marker. You can remove it with a hair dryer and redo or leave black ........lots of options and low cost and protects the guns finish while in place......SM

Rugerdogdog · Post by **Rugerdogdog** » Fri Sep 14, 2007 8:58 am

Is this the stuff???
http://www.camographix.net/camo_kitcontents.htm
God I love Google!!!!!
Was the shipping reasonable?
They want my CC# before they quote shipping.
I'm not paranoid.....much.
The price has gone up. $43 for 2'x5'.

spiderman · Post by **spiderman** » Fri Sep 14, 2007 10:16 am

That is the correct spelling. They must have gone to a bigger piece as mine was 2x4....I think the shipping for me was about six bucks or so...

.can't remember for sure.....still a good deal....SM

Verminator2 · Post by **Verminator2** » Fri Sep 14, 2007 10:28 am

Thanks for the info. I might do that to mine this season.

Big_Bullseye · Post by **Big_Bullseye** » Fri Sep 14, 2007 11:32 pm

My Ruger # 1 w/ Leupold VX-L 6.5X20X56 30MM tube on med rings.

Bad pics but I really like this setup alot.

WrzWaldo · Post by **WrzWaldo** » Sat Sep 15, 2007 10:48 am

Well that does it, I'm done looking at other folks #1's (hmmm that didn't sound right)!

I'm going into active search mode!

glenn asher · Post by **glenn asher** » Sat Sep 15, 2007 4:27 pm

They ARE pretty things, aren't they? My buddy has a twin to that one, in .25/06, and it's a looker, too.

Kinda glad I'm "new truck poor" right now, so I can't afford one.

Big_Bullseye · Post by **Big_Bullseye** » Sun Sep 16, 2007 2:45 pm

Hey Glena A, Washmo66 from MWT. Finally signed up for this forum, thanks for the link. I'll add I have a Moyers adjustable trigger as you suggested, just have't got it on there yet.

glenn asher · Post by **glenn asher** » Sun Sep 16, 2007 3:56 pm

Glad to have you here, BB. You'll fit in well, this is an excellent crowd of very helpful folks. If you need anything at all, just holler, and these guys will fight over who gets to help

. Nice bunch!

Vartarg · Post by **Vartarg** » Wed Sep 19, 2007 6:19 am

I've had it about six months + and am very happy with it. It just got back from getting the "hydrographic" treatment, and has a Weaver 4X16 scope.

hozz57 · Post by **hozz57** » Fri Sep 21, 2007 3:54 pm

This is my XR-100 getting ready for the postal shoot.

Fat NDN · Post by **Fat NDN** » Mon Mar 03, 2008 9:55 pm

H&R .204 Bull Barrel

Prdtrgttr · Post by **Prdtrgttr** » Mon Mar 03, 2008 10:26 pm

Remington SPS , changed stock to a Bell and Carlson from an LVSF. A little Krylon, some paw prints, and it's ready for action once again!

Lefty265 · Post by **Lefty265** » Tue Mar 04, 2008 3:34 pm

Savage Model 12 FV 204 ,Topped with 6x24x50 Nikon Monarch

SmallCaliberCentral

Pics of your 204's

Re: Pics of your 204's

Re: Pics of your 204's

Re: Pics of your 204's

Re: Pics of your 204's

Re: Pics of your 204's

Re: Pics of your 204's

Re: Pics of your 204's

Re: Pics of your 204's

Re: Pics of your 204's

Re: Pics of your 204's

My Rem LVSF

Re: Pics of your 204's

Re: Pics of your 204's

Re: Pics of your 204's

Re: Pics of your 204's