Remington brass

Verminator2 · Post by **Verminator2** » Tue May 01, 2007 6:45 am

Does anybody here use remington brass? How good is it? Thanks.

georgetwalkerjr · Post by **georgetwalkerjr** » Tue May 01, 2007 9:11 am

I use it more than any other, though I've got some Winchester, Hornady and Nosler. I use it for .204, .221 Fireball (only commercial product), 20VT (from .221FB). I prep it completely in every case, and have found it very satisfactory. I'm sure you'll find contrary views.

Gmoney · Post by **Gmoney** » Tue May 01, 2007 9:20 am

All I use...
I'm pleased with it...

Rick in Oregon · Post by **Rick in Oregon** » Tue May 01, 2007 11:37 am

I shoot a custom Sako Vixen in 17 Mach IV, and form R-P 221 F/B brass. I form, detail, anneal, and have never lost a case. as Rem is the only source of 221 F/B brass, that's all I have access to, and I have no problems with it in any regard.

gwglave · Post by **gwglave** » Tue May 01, 2007 2:11 pm

Verminator2
I absolutely will NOT buy Remington .204 Ruger brass.
Don't know whether I got a bad lot, but my hunting partner and I both bought 4 bags of 100 each at Sportsmans' Warehouse. The neck walls were so inconsistent in thickness that I couldn't even neck turn them and get the necks concentric. Run out was terrible.
I took them all back except for the one bag I had opened and got Winchester. Still trying to salvage those 100 cases but will probably end up throwing them in the split brass bucket and selling them for scrap.
These comments only pertain to .204 Ruger as R-P brass in other calibers are just fine.

Rgds, Gerry

Rick in Oregon · Post by **Rick in Oregon** » Tue May 01, 2007 2:26 pm

Gerry: Wow, thanks for the heads-up on R-P 204 brass.....I'll not make that mistake! I'll stick with the WW brass I'm accumulating for my 204.

This weekend I'll be 'unloading' 500 of them on Skippy....

acloco · Post by **acloco** » Tue May 01, 2007 7:10 pm

I have Win and RP brass for my 204. The RP is a LOT better than the Win. All of the split cases and loose primer pockets are in the Win cases. About 30% of the new Win cases, after uniforming the primer pockets and firing, have loose primer pockets.

My RP brass is very good.

Lee C. · Post by **Lee C.** » Tue May 01, 2007 7:26 pm

I went from win. brass to rem. and it's all worked good in my 204and other gun's.

Rick in Oregon · Post by **Rick in Oregon** » Wed May 02, 2007 6:04 am

acloco: That's interesting (your WW brass). I've just loaded up 200 more WW cases that are now on their 5th firing, and even using a max load of RL-10X, all the pockets are nice and tight.

Wonder what's up with the disparity between our WW cases?

Gube · Post by **Gube** » Wed May 02, 2007 11:13 am

I've used the Remington brass and have had no problems so far.

race4hills · Post by **race4hills** » Wed May 02, 2007 9:05 pm

I have had no problem with the 500+ R+P brass that I have. It took longer to prep the 500 W-W brass and had 1 split case out of the bag.

trevort · Post by **trevort** » Wed May 02, 2007 11:30 pm

I use Rem brass and am very happy how it has gone. Am having a semi custom 204 built and thought the Lilja might be fed with Norma. Anyone who has tried Norma is welcome to tell me to save the money and keep buying Rem if that was their experience.

I dont like Win brass from experience with poor quality control in 243wssm and 300 wsm. Split necks in unfired new brass!

Ryan S Albright · Post by **Ryan S Albright** » Thu May 03, 2007 3:12 am

I've been using Winchester brass I have a thousand in 204 I did have a few split necks and found that some have flaws in the necks if you look real close I threw them out. I have lost a few to split neck. The Hornady brass gives me the tightest groups for some reason I was worried at first because they are short in the neck but this works well with the case stretch. The Hornady brass hangs up in the shell holders which makes it a pain to reload. I was thinking of buying a Lot of 1000 of the Remington brass as this helps in the rotation of brass as the Winchester get old. Nosler brass is a little expensive by the thousand but I might invest in it as it comes camfered and the flash hole is reamed.

WHISTLEPIG · Post by **WHISTLEPIG** » Thu May 03, 2007 3:19 am

I have never used Remington brass in the 204, only Winchester. I am on my sixth firing of an original lot of 400 cases. I have yet to have a split neck, but I have annealed all cases after four firings. After each firing, each case is checked again for run out and culled if the case neck after neck sizing has more than .003 run out. I have only had to cull six or eight cases. Bulk brass like Winchester or Remington is not going to be perfect. A lot of work can get it to be as good a it is going to get, but it is never going to be Lapua. Case wall thickness variations can not be overcome. The bottom line is that for field applications, within reasonable distances Winchester brass works just fine.

Sage Rat · Post by **Sage Rat** » Thu May 03, 2007 12:02 pm

I notice GeorgeTWalker and Ryan Albright are the only chaps to mention Hornady brass. Do the rest of you not like it?

SmallCaliberCentral

Remington brass

Remington brass

Remington

Brass