Question about age of my single 6?

[robert w.]

Its a 5.5" barrel. .22 s,l,lr only 1 cylinder. Serial number 60-51039. Its unconverted.
I look on rugers serial number pages and my serial number dont show up

P_20190105_132855.jpg (833.4 KiB) Viewed 7731 times

P_20190105_132840.jpg (1.06 MiB) Viewed 7731 times

P_20190105_132830.jpg (1.06 MiB) Viewed 7731 times

P_20190105_132737.jpg (826.71 KiB) Viewed 7731 times

[Rick in Oregon]

Robert, go here and ask the question. There are many more folks there that may be able to help with your serial number/age.

http://www.rugercollectorsassociation.com/

[robert w.]

Thank you Rick,i looked. Guess i need to join . I read all the old 3 screw single six posts,not a 1 close to my numbers. Wishful thinking migh be a rare 1 haha . Chances of that,slim to none. But shoots ruger unconverted nice and locks tight. Small bit of blue wear at muzzle end from holster. Id say its been shot very little.
Must add it has adujstable sights both windage and elevation

[robert w.]

20190105_155733.jpg (1.21 MiB) Viewed 7719 times

looks like i got a super single six serial number on a single six.if above is correct its a 71 year of build. But the super single six number matches my single six. Might be rare who knows???

[Bill K]

Robert, or anyone for that matter. Take this bit of info for what it is worth but having been in LE for over 28 years I can tell you it is not a wise thing to do and show the serial number of any firearm on social media or sites. Criminals are really cleaver at using them for their gain. If you show or ask about such and such use maybe a portion and then xxxx's for other numbers. Just a thought. Bill K

[robert w.]

Ok. They might have a time finding me though.but good idea

[varget204]

I believe the 3 srews were made in early 60's. varget204

[robert w.]

3 screws were made from mid 50's till 73 with several changes. Rare is 4.5" and 7.5" barrel. But all indications show my single six stamped revolver has a super single six serial number

[varget204]

Cool; that may make it worth more,I got 1 in 1968,1st revolver i ever bought,I think i traded it for High Standard 22 in the mid 70's.Not 1 of the smartest deals i ever made.Great revolvers, made to shoot for ever.I had both cylinders.Remember shooting Empty 1 lb propane bottle w/Marlin 39A rifle at about 15 yards,made a quarter size dent in the end of it,shot it w/22 mag cylinder,Blew a 1 inch hole through both ends of bottle.Do not make same mistake i did,3 screws are hard to find in good condition,and are costly.You might be able to get info from Ruger about it.Be interesting finding out story about it.--varget204

[robert w.]

No ive wanted a 3 screw unconverted single six for years. This 1 is very nice with small bit of honest holster wear at muzzle ,grips are very nice