Using the Hornady Comparitor

Share information about reloading the 204 Ruger.
Post Reply
inKYfromSD
Senior Member
Posts: 158
Joined: Wed Aug 03, 2011 7:26 am
.204 Ruger Guns: CZ 527 varmint .204, Cooper Model 21 20 VarTarg

Re: Using the Hornady Comparitor

Post by inKYfromSD »

What if you find that seating the bullet at max length isn't the accuracy node that you were looking for? You'll need something to measure with. I think you'll find that using the bullet tip (meplat?) isn't always consistent. Be sure and keep it, you'll need it when you get your Cooper...
Top
bdweis73
New Member
Posts: 16
Joined: Thu Mar 29, 2012 2:36 pm
.204 Ruger Guns: Rem 700 SPS, Savage 12 FV-S
Location: Springfield Oregon

Re: Using the Hornady Comparitor

Post by bdweis73 »

I got tired of adjusting seating dies, so I bought a neck sizing set with a seater die. So I have 2 seating dies one die for 39 SBK's and the other die for 32's, once I had them set I don't have to mess with them just check with bullet comparator for a round or two spot on and just keep on seating bullets sure cut down on set up time.
Top
Post Reply

Return to “Reloading the 204 Ruger”