39gr H4895 OCW Load workup

Ask questions and share information about reloading.
User avatar
brooksb
Senior Member
Posts: 181
Joined: Thu Sep 08, 2016 3:34 pm
.204 Ruger Guns: Ruger M12 FV
Location: up date, we sold in Ca, we are house hunting.

39gr H4895 OCW Load workup

Post by brooksb »

Shot these Eight loads as per the OCW directions which meant I only shot each load/target every eight shots
Shot these Eight loads as per the OCW directions which meant I only shot each load/target every eight shots
OCt 4 39gSBK1-1.png (61.18 KiB) Viewed 1688 times
last two loads were pretty near max, so I'm not disappointed they didn't test well
last two loads were pretty near max, so I'm not disappointed they didn't test well
OCt 4 39gSBK1-2.png (51.7 KiB) Viewed 1688 times
Jim White
Moderator
Posts: 1406
Joined: Mon Nov 03, 2008 2:06 pm
.204 Ruger Guns: CZ-527, Remington 700 VLTHSS

Re: 39gr H4895 OCW Load workup

Post by Jim White »

Your groups for 26.8 looks just like my 5-shot groups of 27.9 gr @ 200 yds with the same bullet with my CZ527. IIRC, the max load [at the time per the manuals] was 28.1 although I used RP brass vice WW. Mine shoots like that still today and for what ever reason, all of my 204's shoot best up near max while most others shoot down in the mid range somewhere.
User avatar
brooksb
Senior Member
Posts: 181
Joined: Thu Sep 08, 2016 3:34 pm
.204 Ruger Guns: Ruger M12 FV
Location: up date, we sold in Ca, we are house hunting.

Re: 39gr H4895 OCW Load workup

Post by brooksb »

Interesting, what is posted is my second shoot with 39g BK I up didn't find a good load at lower charges so those posted were a grp of heavier charges. 32gr Vmax's with BL-C (2) shoot best it seems at low charges, 28.3 which is what I used on my posted target is A min charge.
Jim White
Moderator
Posts: 1406
Joined: Mon Nov 03, 2008 2:06 pm
.204 Ruger Guns: CZ-527, Remington 700 VLTHSS

Re: 39gr H4895 OCW Load workup

Post by Jim White »

I may have miss spoke, I use 39-gr SBK, vice 32 grains. Either way, all of my 204's shoot much better up near the top of the charge vice the lower and middle bands.
User avatar
brooksb
Senior Member
Posts: 181
Joined: Thu Sep 08, 2016 3:34 pm
.204 Ruger Guns: Ruger M12 FV
Location: up date, we sold in Ca, we are house hunting.

Re: 39gr H4895 OCW Load workup

Post by brooksb »

We've had the North winds fires and smoke so I haven't been to range to drill down on the Three best 39SBK H4895 Loads and see if i can shoot another small grp With the 32vmax/BL-C (2) loads, but 4cast looks good for early next WK.
User avatar
brooksb
Senior Member
Posts: 181
Joined: Thu Sep 08, 2016 3:34 pm
.204 Ruger Guns: Ruger M12 FV
Location: up date, we sold in Ca, we are house hunting.

Re: 39gr H4895 OCW Load workup

Post by brooksb »

Well too bad I didn't have my scope zeroed for the best grp above for the monthly competition. the North winds have subsided and I shot the 26.6, 26.8 & 27.0 loads twice yesterday the best grp was .285" & the other was .482". So I'm going to go with the 26.8 load practice some more and maybe tweak some more.
Jim White
Moderator
Posts: 1406
Joined: Mon Nov 03, 2008 2:06 pm
.204 Ruger Guns: CZ-527, Remington 700 VLTHSS

Re: 39gr H4895 OCW Load workup

Post by Jim White »

What distance are you shooting at? If it's 200 yards thats pretty darn good. On a like day [weather wise] see if the loads are repeatable. If these were done @ 100 yds, if possible, try them at 200 yds and see how they do. HTH
User avatar
brooksb
Senior Member
Posts: 181
Joined: Thu Sep 08, 2016 3:34 pm
.204 Ruger Guns: Ruger M12 FV
Location: up date, we sold in Ca, we are house hunting.

Re: 39gr H4895 OCW Load workup

Post by brooksb »

No, just 100 for load work-up but that's probably next as I'll zero to 200.
dan97526
Senior Member
Posts: 109
Joined: Sun Nov 11, 2007 9:21 pm
.204 Ruger Guns: Cooper M21, Cooper 38 20VT, CZ 17H
Location: Grants Pass, State of Jefferson (formerly Oregon)

Re: 39gr H4895 OCW Load workup

Post by dan97526 »

Ha! Exactly - exactly! - what I came here to ask about today: 39gr SBK with H4895. I'll be running my own OCW on this combo within the within the next month, I will be sure and post results. Thanks!

I'd have a pretty tough time myself reading the OCW tea leaves with this test. I don't see a clear node.
User avatar
brooksb
Senior Member
Posts: 181
Joined: Thu Sep 08, 2016 3:34 pm
.204 Ruger Guns: Ruger M12 FV
Location: up date, we sold in Ca, we are house hunting.

Re: 39gr H4895 OCW Load workup

Post by brooksb »

I went again and shot the same series of loads only with an OAL of 2.300 just for kicks and 26.8 shot tighter, since then between WX and Thanksgiving I haven't been with this load. I switched scopes between the 22-250 & 204 so my range time has been re sighting.
k9i449
New Member
Posts: 30
Joined: Mon Nov 06, 2017 6:02 am
.204 Ruger Guns: T/C Encore WeatherGuard MGM barrel, Bushnell 4500 6-24x40

Re: 39gr H4895 OCW Load workup

Post by k9i449 »

What brass and What twist in the barrel?
User avatar
brooksb
Senior Member
Posts: 181
Joined: Thu Sep 08, 2016 3:34 pm
.204 Ruger Guns: Ruger M12 FV
Location: up date, we sold in Ca, we are house hunting.

Re: 39gr H4895 OCW Load workup

Post by brooksb »

Hornady & 1:12 from Savage M12, Remember 7 1/2 primers. I haven't shot the 39's any more, between switching scopes and the accuracy issues using different powders on the same range day I just haven't, but with better WX I will.
k9i449
New Member
Posts: 30
Joined: Mon Nov 06, 2017 6:02 am
.204 Ruger Guns: T/C Encore WeatherGuard MGM barrel, Bushnell 4500 6-24x40

Re: 39gr H4895 OCW Load workup

Post by k9i449 »

The reason I'm asking working on my Encore 1-11 twist MGM SS 24" with the 39grSBK. I having brass issues, more than anything, Fiocchi, Hornady and Winchester. Sending Fiocchi back it was factory ammo, brought for the brass, it was HOT, flat primers, primers backing out.
User avatar
brooksb
Senior Member
Posts: 181
Joined: Thu Sep 08, 2016 3:34 pm
.204 Ruger Guns: Ruger M12 FV
Location: up date, we sold in Ca, we are house hunting.

Re: 39gr H4895 OCW Load workup

Post by brooksb »

I have a mix of Hornady, Win, & RP ,but I test load with H. No problems with any, except H has bigger burrs in flash holes (inside case)
User avatar
Ray P
Senior Member
Posts: 645
Joined: Sat Dec 31, 2005 10:32 am
.204 Ruger Guns: 2-Rem 700 and Ruger#1 S/S
Location: NE Pa
Contact:

Re: 39gr H4895 OCW Load workup

Post by Ray P »

Morning, you are in the OCW ballpark. Each rifle is a little different. This is what is so great about hand loading. My pet load is with H 4895 by 27.0 w/ 39 sierra and can get groups like your 26.8 load. Way to go. Nice target you posted. Enjoy your 204 Ruger, great little cartridge.

Later
Ray P
Life is an adventure and often to short. Make the most with family and friends. Shoot often and shoot a small hole. Love the 204 Ruger!! NRA Life Member
"We are never to old to learn"
Post Reply