ND PD Hunt on 6-28-2016

Talk about hunting the hunters and their prey.
User avatar
Silverfox
Senior Member
Posts: 937
Joined: Tue Feb 01, 2005 1:51 pm
.204 Ruger Guns: Savage 12VLP purchased in June 2004 + 2 other custom .204s
Location: NW North Dakota

ND PD Hunt on 6-28-2016

Post by Silverfox »

Once again I didn’t get going very early in the morning, but I wanted to get to the rancher’s house a little later in the morning because he likes to sleep in and I didn’t want him to get angry at me for waking him up!!! I had my old Savage 12VLP that I had rebarreled with a stainless steel super match grade 1 in 11 twist three-groove barrel. I had my gunsmith use the same reamer I used on my Savage target action so both of them are chambered with a .230" neck. My brass is the Norma brand and I use hBN coated 39 gr. Sierra BlitzKing bullets and seat them so they are .010" off the lands. I’m using are the Remington 7½ primers to light the powder on fire. The load I’m using is 27.0 grains of H4895 and the muzzle velocity is 3,791 fps. The barreled action is sitting in a Bell & Carlson Tactical Medalist Style 2 Vertical Grip #2999 Savage 10—16 Short Action stock in the tan color with black web. The trigger is a Rifle Basics SAV-1 model adjusted to 1 pound of pull. The rifle is topped off with a Nikon Monarch 3 6-24x50mm scope with the Nikoplex reticle and there’s a Gemtech Trek-Ti suppressor on the end of the barrel with a white mirage shield as well. I usually have the scope cranked up between 20x and 24x except on a couple of 15 to 25 yard shots.

I parked the pickup at 9:14 a.m. and it took me another 35 minutes to get all my gear together. However, I did pause and shoot two prairie dogs while trying to get ready to start walking. I left the pickup at 9:49 a.m. walked in a southerly direction stopping and picking off prairie dogs as I walked along. I hadn’t walked 15 yards from the pickup before I set up on a PD mound and fired of 6 shots. I bagged 1 double and 5 singles to go along with the 2 PDs I had shot while trying to get my gear together. The photo below shows the two PDs I got on my first double of the day.

Image

The shooting was pretty good. The pups are not quite as big as the adults, but are easier targets than they were a month ago. Here’s a photo of one of the large adults and my rifle.

Image

I had taken my Caldwell Wind Meter out to check the temperature and it was 82º. I knelt down alongside my backpack to put my Caldwell Wind Meter away and felt something on my boonie hat. I thought maybe a hawk has swooped down thinking my hat was some kind of prey. It wasn’t a hawk, but it was a small bird. I didn’t’ get a real good look at it, but it might have been a male lark bunting. It was black and had white feathers on its wings. I was glad it wasn’t a hawk!!! My camo must be pretty good if it fooled the bird!!!

One of the prairie dogs I shot in the morning was extremely large. I propped up one of my 39 gr. Sierra BlitzKing shells alongside the prairie dog’s head for a comparison.

Image

I had hit the east side of the valley and now I started walking to the WSW, stopping and shooting as I went along. I saw a stock dam up ahead and climbed up on the big mound of dirt that was there to hold the water back, but there wasn’t any water in the dam. Anyway, it was a nice raised position from which to shoot in a 180º area. I had to stop shooting several times and used my BarrelCool device to cool the barrel down. I had 46 shells in this first cartridge box when I started shooting this morning and only 4 of those shells had the necks turned. I had shot 41 shots and hit on 3 doubles and 38 singles for a total of 44 dead prairie dogs with those 41 shots. The 42nd shot was a miss and it should have been a hit??? Anyway, I loaded the four casings with the turned necks and got 4 more prairie dogs with those shots. After those shots I was going to head back to the pickup, but I could feel something biting me under my arm and a couple places on my chest. I had to open my shirt to see what was going on and I had some little red ants making my life miserable. I got rid of them and headed back to the pickup. I had spotted lots of blossoms on my walk into the PD town so I took out my camera and snapped a bunch of photos of blossoms before I got back to the pickup. Here’s a collage of some of the blossoms I saw. The milkweed plant and close-up of one of its blossoms were snapped in the afternoon. Those are the first two photos in the collage below.

Image

I put my rifle away and headed over to the ranch house to see if it was OK if I headed south of there for the afternoon shoot. I got the OK and drove to a point where I could park my pickup and stopped to have lunch at 12:20 p.m. After lunch I decided I needed a nap so I got comfortable in the shade of my pickup and got in a good hour-long nap. I didn’t get started on the afternoon shoot until 2:50. I had 49 rounds left to shoot. Nine of those were casings that had been shot 3 times and the remaining 40 rounds had only been shot 1 time. By now the temperature was just a bit below 90º and at 3:30 I used the BarrelCool device for 10 minutes again to cool off the barrel. Here’s a photo of the temperature sensitive strip with the 113º strip a green color indicating the temp of the barrel.

Image

By 5:00 p.m. I had shot the last of my 49 rounds and decided to gather up a few dead prairie dogs for a group photo. Here’s the “Hero Photo” of me with the “Prairie Dog Quintet”. There’s one adult on the right and the other four are this year’s pups.

Image

It was 90º when I started my walk back to the pickup at 5:30. I got stuff packed into the pickup and started my trip back home at 5:41. I had a lawn that needed mowing so I wanted to get back home and get that done before dark. It had been a very good day out in the prairie dog town. I had taken a total of 95 shots. I had missed on 6 of those shots, managed to bag 4 doubles and 85 singles for a total of 93 dead prairie dogs for the 95 shots. Now I need to do some resizing and reloading to get ready for my next outing. I hope you enjoyed this PD hunt.
Catch ya L8R--Silverfox
User avatar
futuretrades
Senior Member
Posts: 835
Joined: Sat Aug 25, 2007 11:16 am
.204 Ruger Guns: HOWA 1500 .204 Ruger Varmint, Bull Bbl, Lupy 6-18x40 custom

Re: ND PD Hunt on 6-28-2016

Post by futuretrades »

Again, a great story of your adventures. Thanks for taking us along with you. I am curious about the "Barrel Cool" you mentioned here. Would like to know a little more about it. Where did you get this product. I have to be real careful with barrel heat when shooting out here. When in a target rich environment, I sometimes shoot way to fast, don't want to pass on a target :chin: . After around 15 rounds, I keep checking for barrel heat in cooler weather . When the temps rise later in the year, maybe after 6 rounds or so, barrel starts to get into the danger zone :eek: I have began using a wet towel or tee shirt to try to keep the barrel cooler. that seems to work for me, but sometimes is a little messy. And getting older, I am loosing the sensitivity in my hands and fingers
NRA Benefactor Life member
HOWA 1500 Varmint 204 Ruger, Bull Barrel, Hogue Overmold Stock, Leupold VXII 6-18x40mm AO LRV Custom Reticle Timney Trigger
Cooper Mdl 21 20VarTargW/Leupold VXIII, 6-20x40AO Varmint Hunter reticle.
User avatar
Silverfox
Senior Member
Posts: 937
Joined: Tue Feb 01, 2005 1:51 pm
.204 Ruger Guns: Savage 12VLP purchased in June 2004 + 2 other custom .204s
Location: NW North Dakota

Re: ND PD Hunt on 6-28-2016

Post by Silverfox »

futuretrades--I learned about the BarrelCool device over at the Accurate Shooter Web site. Click on the following link to view the article: http://bulletin.accurateshooter.com/tag/barrel-cool/ . I used the link to the BarrelCool Website which can be found in the article, and ordered it right from the http://barrelcool.com/.

Catch ya L8R--Silverfox
User avatar
futuretrades
Senior Member
Posts: 835
Joined: Sat Aug 25, 2007 11:16 am
.204 Ruger Guns: HOWA 1500 .204 Ruger Varmint, Bull Bbl, Lupy 6-18x40 custom

Re: ND PD Hunt on 6-28-2016

Post by futuretrades »

Thanks a bunch, Silverfox. I did order one off their web site, after reading your post. :wink: Made for some interesting reading on their website. After reading what you said and what was on their web page, I decided, that it couldn't hurt to have one in my shooting bag just in case.
Thanks again!
NRA Benefactor Life member
HOWA 1500 Varmint 204 Ruger, Bull Barrel, Hogue Overmold Stock, Leupold VXII 6-18x40mm AO LRV Custom Reticle Timney Trigger
Cooper Mdl 21 20VarTargW/Leupold VXIII, 6-20x40AO Varmint Hunter reticle.
User avatar
Silverfox
Senior Member
Posts: 937
Joined: Tue Feb 01, 2005 1:51 pm
.204 Ruger Guns: Savage 12VLP purchased in June 2004 + 2 other custom .204s
Location: NW North Dakota

Re: ND PD Hunt on 6-28-2016

Post by Silverfox »

futuretrades--You are most welcome. It worked out well for me in my prairie dog town shooting and I have used it while testing loads as well. It beats the wet towel method for me.
Catch ya L8R--Silverfox
User avatar
chuckhunter
Senior Member
Posts: 122
Joined: Mon Sep 25, 2006 5:08 pm
.204 Ruger Guns: Savage Model 25 thumbhole, Savage Model 12
Location: BUFFALO, NEW YORK

Re: ND PD Hunt on 6-28-2016

Post by chuckhunter »

Hey Silverfox..PM sent.
Jim White
Moderator
Posts: 1406
Joined: Mon Nov 03, 2008 2:06 pm
.204 Ruger Guns: CZ-527, Remington 700 VLTHSS

Re: ND PD Hunt on 6-28-2016

Post by Jim White »

Nice article, as always?

I'll need to follow up on the barrel cool device, the info at the website makes it sound real interesting. How do you like the Monarch 3 scope line? I had the 1st GEN of the Monarch side-focus scopes [6-24] and they were quite clear up to about 18x; from there to 24x it became a little too hazy for me.

Thanks again for sharing,

Jim
User avatar
Silverfox
Senior Member
Posts: 937
Joined: Tue Feb 01, 2005 1:51 pm
.204 Ruger Guns: Savage 12VLP purchased in June 2004 + 2 other custom .204s
Location: NW North Dakota

Re: ND PD Hunt on 6-28-2016

Post by Silverfox »

Jim--Thanks for the compliment on the little write-up I shared.

How do you like the Monarch 3 scope line? I had the 1st GEN of the Monarch side-focus scopes [6-24] and they were quite clear up to about 18x; from there to 24x it became a little too hazy for me.


The scope on my rifle pictured in this story is my third Monarch 3 scope and I just got that one last fall. My first one was a refurbished one that was very reasonably priced and has given me great service. Like I mentioned in the story, when I am shooting prairie dogs over 50 yards away, I very seldom have the power ring set below 24 and I haven't really noticed the haze. Once in awhile on extremely hot days, there will get to be a bit of heat mirage.

I bought a used Nikon Monarch 8-32x50ED SF M BDc and thought it would work great on my Tikka Master Sporter in .22-250. However, the BDC reticle made it real tough for me to see the bulls-eye on the targets I use to test loads and sight in my rifles. I took it off when my new Monach 3 6-24x50mm scope arrived last fall. I'm in the market to sell the 8-32x scope, but I'll have to put it in the classifieds one of these days.
Catch ya L8R--Silverfox
Jim White
Moderator
Posts: 1406
Joined: Mon Nov 03, 2008 2:06 pm
.204 Ruger Guns: CZ-527, Remington 700 VLTHSS

Re: ND PD Hunt on 6-28-2016

Post by Jim White »

Thanks for sharing.

Other than the hazy part in the upper range I really liked mine. I heard that it was caused by some light reflection internal of the scope was the culprit behind it. Since then Nikon has come out with some newer versions of that scope and I've been trying to see if that little attribute had changed. My other scopes are Zeiss, Swarovski and Leupold and they don't have that issue so it was always quite noticeable, especially on bright sunny days when I used that scope. My scope had the 1/8" target-dot reticle and it was great for load testing. I don't normally shoot past 12x myself so I don't know how it would have worked out in a rat patch at long distances, I'm thinking it may obscure them. For me, I rarely shoot up close with my centerfires, I save those for the rimfire rigs.

Incidentally, I checked out the bore-cool and I'll be ordering one this week. My other question is, where did you pick up the temp stickers on your barrel? I've seen them before but just don't remember where.

Thanks again,

Jim
User avatar
Silverfox
Senior Member
Posts: 937
Joined: Tue Feb 01, 2005 1:51 pm
.204 Ruger Guns: Savage 12VLP purchased in June 2004 + 2 other custom .204s
Location: NW North Dakota

Re: ND PD Hunt on 6-28-2016

Post by Silverfox »

Jim--I ordered the temperature strips from McMASTER-CARR. They are: Item #59535K13, Temperature-Indicating Labels, Horizontal Orientation, 86º to 140º. There are 10 in a pack and each pack is priced at $12.16. I ordered two packs and the shipping cost $7.07.

How many strips do you need? If you need just 2 or 3 there's no need for you to order 10, I will send them to you from my supply at no cost to you. Just send your mailing address to me via e-mail at:

Image

I learned about these strips from over at www.accurateshooter.com in the "BULLETIN" forum. Lots of good stuff over there.
Catch ya L8R--Silverfox
Bill K
Senior Member
Posts: 2324
Joined: Tue Jan 18, 2011 10:00 am
.204 Ruger Guns: also now, a Savage switch bull barrel in 204R. 23 inch SS
Location: Lake Forest, Ca.

Re: ND PD Hunt on 6-28-2016

Post by Bill K »

Varmintshooter turned me onto those same temp strips. They are the cats meow to watch your barrel temp. And very reasonable in price. :D Bill K.
Jim White
Moderator
Posts: 1406
Joined: Mon Nov 03, 2008 2:06 pm
.204 Ruger Guns: CZ-527, Remington 700 VLTHSS

Re: ND PD Hunt on 6-28-2016

Post by Jim White »

Silverfox wrote:Jim--I ordered the temperature strips from McMASTER-CARR. They are: Item #59535K13, Temperature-Indicating Labels, Horizontal Orientation, 86º to 140º. There are 10 in a pack and each pack is priced at $12.16. I ordered two packs and the shipping cost $7.07.

How many strips do you need? If you need just 2 or 3 there's no need for you to order 10, I will send them to you from my supply at no cost to you. Just send your mailing address to me via e-mail at:

Image

I learned about these strips from over at http://www.accurateshooter.com in the "BULLETIN" forum. Lots of good stuff over there.
Thank you so much for your generosity. I could use 3 of them to test out.

PM and email sent...
Jim White
Moderator
Posts: 1406
Joined: Mon Nov 03, 2008 2:06 pm
.204 Ruger Guns: CZ-527, Remington 700 VLTHSS

Re: ND PD Hunt on 6-28-2016

Post by Jim White »

Bill K wrote:Varmintshooter turned me onto those same temp strips. They are the cats meow to watch your barrel temp. And very reasonable in price. :D Bill K.
Thanks and I'll certainly take a look at them...Jim
Post Reply