20 VT case forming question.

Ask questions and share information about reloading.
Post Reply
GlennGTR1
Junior Member
Posts: 57
Joined: Tue Nov 11, 2008 10:34 am
.204 Ruger Guns: ruger 77 all weather ultralight

20 VT case forming question.

Post by GlennGTR1 »

Simple question, how difficult is it to form cases from the fireball? I have reloaded for about three years now for standard cartridges but havent done any wildcating.
Top
User avatar
jlc204
Junior Member
Posts: 52
Joined: Sat Sep 25, 2010 3:24 pm
.204 Ruger Guns: savage 12 vlp single shot 204

Re: 20 VT case forming question.

Post by jlc204 »

I read post wrong. sorry
Last edited by jlc204 on Mon May 16, 2011 7:05 am, edited 1 time in total.
Top
User avatar
wirelessguy2005
Senior Member
Posts: 663
Joined: Wed Feb 24, 2010 6:59 pm
.204 Ruger Guns: Custom 20 SCC, Savage LRPV 20 Nitro , Howa 1500 204 Ruger
Location: Indiana

Re: 20 VT case forming question.

Post by wirelessguy2005 »

In the past i have used 221 fireball brass to make my 20 vt cases. Recently i started using 17 fireball brass to make my 20 vt cases and i like using is much more. In my opinion its easier to size the 17 FB brass up to 20 VT than it is to size the 221 brass down. All thats required to make 20 VT brass is simply run 221 fireball or 17 fireball brass thru the 20 VT full length sizer. PM me if you have any questions and i would be happy to answer them.

Brad
Top
Post Reply

Return to “General Reloading”