Great Trip To Work
- RAMOS
- Senior Member
- Posts: 765
- Joined: Sat Nov 21, 2009 9:30 am
- .204 Ruger Guns: Savage Model 12 FLV, Cooper M21
- Location: Sherman County, Oregon
Great Trip To Work
I'm lucky enough to live in an area that allows my .204 to be in my truck at all times. Always on the lookout for targets of opportunity such as squirrels, coyotes, badger, crows, etc. This morning was especially productive. I got two jackalopes, one flying pig and half a dozen snipes on my 7 mile drive! I was using my new pet load: 16 grain V-Max (a 32 cut in half) on top of 60 grains of Varget (slightly compressed) with a large magnum primer (I re-drill the primer pocket). Muzzle velocity is 7500 fps. After firing one of these rounds my bolt was a little difficult to cycle. I fixed that issue by welding a six inch extension on my bolt handle using a nice piece of re-bar. If anyone here needs custom reloads or gunsmithing, let me know! My prices are quite reasonable. Rick, feel free to PM me with your' questions. I will reply confidentially and you can make everyone think you came up with the answer on your' own. Happy April Fools' day to a great bunch of guys!!!
- Rick in Oregon
- Moderator
- Posts: 4942
- Joined: Thu Dec 01, 2005 4:20 pm
- .204 Ruger Guns: Sako 75V, Cooper MTV, Kimber 84M, Cust M700 11 Twist
- Location: High Desert of Central Oregon
- Contact:
Re: Great Trip To Work
I started reading thinking....."this guy is lucky enough to have 'drive-by' varmint opportunities all the time"......but then.... Good one.
How much are the 'bolt handle extensions'? May come in handy during those pressure excursions into "Wildcat Land" we all fear with a primordial dread.
How much are the 'bolt handle extensions'? May come in handy during those pressure excursions into "Wildcat Land" we all fear with a primordial dread.
- RAMOS
- Senior Member
- Posts: 765
- Joined: Sat Nov 21, 2009 9:30 am
- .204 Ruger Guns: Savage Model 12 FLV, Cooper M21
- Location: Sherman County, Oregon
Re: Great Trip To Work
Rick,
If you act now, I can give you one complimentary extension for marketing purposes. The one I have ready to go will fit any Cooper M21 action. I grind the weld down with a 6" angle grinder so it looks "real good" ! Seriously, I do have some nice "drive by" opportunities.
If you act now, I can give you one complimentary extension for marketing purposes. The one I have ready to go will fit any Cooper M21 action. I grind the weld down with a 6" angle grinder so it looks "real good" ! Seriously, I do have some nice "drive by" opportunities.
- Ray P
- Senior Member
- Posts: 645
- Joined: Sat Dec 31, 2005 10:32 am
- .204 Ruger Guns: 2-Rem 700 and Ruger#1 S/S
- Location: NE Pa
- Contact:
Re: Great Trip To Work
RAMOS.............I'll order a bolt ext to fit my Remingtons.
Plus could you post pic of your chrono with 7500fps on screen!!
I bet you get excellent barrel life at that velocity too!!
On 2nd firings do you use super glue to keep the primers in?
O by the way April fools!!
Happy Easter you guys .
Spring is here and may your barrels be hot.
Later
Ray P
Plus could you post pic of your chrono with 7500fps on screen!!
I bet you get excellent barrel life at that velocity too!!
On 2nd firings do you use super glue to keep the primers in?
O by the way April fools!!
Happy Easter you guys .
Spring is here and may your barrels be hot.
Later
Ray P
Life is an adventure and often to short. Make the most with family and friends. Shoot often and shoot a small hole. Love the 204 Ruger!! NRA Life Member
"We are never to old to learn"
"We are never to old to learn"
- RAMOS
- Senior Member
- Posts: 765
- Joined: Sat Nov 21, 2009 9:30 am
- .204 Ruger Guns: Savage Model 12 FLV, Cooper M21
- Location: Sherman County, Oregon
Re: Great Trip To Work
Ray,
Did not have much luck with super glue. I use JB-Weld. It's permanent, but that is okay because the case is worn out after the 2nd firing! Extensions are in the mail.
Did not have much luck with super glue. I use JB-Weld. It's permanent, but that is okay because the case is worn out after the 2nd firing! Extensions are in the mail.