i finally got some remington new, never loaded, brass. i sized 35 cases with full length resize die. i did not lube the inside of the necks before sizing. all cases went through the resize die with little pressure other than when i pulled the brass back out of the die, but still no excessive tightness. i then trimmed back to 1.840 on all of these cases. as i stuffed 32 grain vmax bullets in each case, i kept expecting the CRUSH. but to my chagrine,
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
![Cool 8)](./images/smilies/icon_cool.gif)
and i have never had problems by not lubing the necks in all of my loading experience, up until now
i have never used winchester new brass until now, but you can bet your a$$ i will never use it again
![Evil or Very Mad :evil:](./images/smilies/icon_evil.gif)
![reddot :reddot:](./images/smilies/reddot.gif)
now if you will escuse me, i have some ammo to burn up!
![assault :assault:](./images/smilies/assault.gif)