Page 1 of 1
Switching barrels/calibers
Posted: Sun Feb 24, 2008 11:58 am
by LeeC
As I understand it, with the exception of the Savage target actions, Savage makes only two actions: long and short. Correct?
So, in theory, my 12VLP in 204Ruger can be rebarreled (changing bolt head, of course) to .260, .308 etc. or any other shorts action cartridge, with the exception and the short magnums. Am I correct in this assumption?
Re: Switching barrels/calibers
Posted: Sun Feb 24, 2008 12:07 pm
by YoteSmoker
You're kinda correct
All actions including Savage are short (308 win, 223 rem, 300 wsm examples) and long (30-06 based cartridges ect), and some long magnums like 300 rum etc. If you wanted to go from say 204 ruger to 308 win, you could use the same action but you would have to change out the bolt face for .473 face to accept the 308 win case head. Same idea for WSM or SAUM etc. Also same concept for long actions, you would need a magnum bolt face to turn a 270 win into a 7mm mag for example. The nice thing with using a long action is you can shoot short action cartridges through it and reach the rifling because of all the space in the magazine.
Re: Switching barrels/calibers
Posted: Sun Feb 24, 2008 12:13 pm
by YoteSmoker
The nice thing about the savage actions is you can easily switch barrels and headspace yourself at home with a action and barrel wrench and a set of go/no go gages in a matter of minutes. No gunsmith required.
Re: Switching barrels/calibers
Posted: Sun Feb 24, 2008 12:21 pm
by LeeC
Thanks Yotesmoker. I just love that handle....how do you keep them lit? I did a winter project; got ahold of a 110 on the cheap in 30-06, re-stocked it with a B&C Duramaxx, SSS trigger, and have yet to get my Shilen 6.5x55 barrel. Thought I'd try a little long-range match stuff this spring. Just wanted to make sure my short action would hold the stiffer loads.
Re: Switching barrels/calibers
Posted: Sun Feb 24, 2008 1:19 pm
by YoteSmoker
Interesting. I've just re-finished a sporterized m95 mauser 6.5 and am excited to try some test loads at the range. Are you planning to shoot the 142 a-max? Mine won't take the hot loads that yours will but it will work ok for deer with either a 129 btsp or 125 partition.
Re: Switching barrels/calibers
Posted: Sun Feb 24, 2008 1:20 pm
by YoteSmoker
Oh and I like to light them up with a 32 or 55 grain v-max. But they go out pretty quick!
Re: Switching barrels/calibers
Posted: Sun Feb 24, 2008 5:43 pm
by LeeC
Yote-I keep well within the loadbook specs with my Mod. 96 Swede, but I only shoot it once in awhile just to keep its muscles limber. It's 100 Yrs old, and I don't push it. It's straight as-issued except for the front sight which I made a tall sight to shoot at 100-300 yds. It does quite well with A-max and IMR 4895.
The 110 I'm building I need to push 139gr Lapua's and 142SMK's to 2800 or better, so I plan to start with RL-22. Seem's that will give a bit more velocity with less pressure.
Re: Switching barrels/calibers
Posted: Mon Feb 25, 2008 1:02 pm
by LeeC
Yote- PM sent. Lee
Re: Switching barrels/calibers
Posted: Mon Feb 25, 2008 2:03 pm
by YoteSmoker
Replied to LeeC
Re: Switching barrels/calibers
Posted: Mon Feb 25, 2008 2:39 pm
by Rifle 223
LeeC wrote:As I understand it, with the exception of the Savage target actions, Savage makes only two actions: long and short. Correct?
So, in theory, my 12VLP in 204Ruger can be rebarreled (changing bolt head, of course) to .260, .308 etc. or any other shorts action cartridge, with the exception and the short magnums. Am I correct in this assumption?
I send you a PM