Freshen, re-chamber or re-barrel 17 Mach IV?

Talk about or share information about your centerfire rifles.
Blockcaver
New Member
Posts: 5
Joined: Mon Feb 15, 2016 11:52 am
.204 Ruger Guns: Cooper M21 and Remington 700 w/PacNor 1-11"

Freshen, re-chamber or re-barrel 17 Mach IV?

Post by Blockcaver »

I've got a Cooper Montana Varmint single shot in 17 Mach IV I bought used for a nice price. It isn't very accurate with any loads......20 gr Berger HP, 20 gr V-Max or Nosler HP. I have Lapua cases along with some Remington cases (all .221 FB) and have tried many powders applicable to the cartridge.....H335, 8208, Benchmark, etc. No real improvement on the typical 2" groups at 100 yards. My other 4 Coopers are very accurate, with my .204 Varmint turning out 1/4" groups on occasion. The crown looks great and the rifle was recently re-bedded (by me) with no change in group size. The scopes I have tried on it are all good, the mounts are fine as well. Its not the shooter or the reloader (me) either, so likely is a bad the barrel.

That said, does anyone think it would be worth having a gunsmith shorten and re-chamber the rifle? I have free access to a 17 Fireball reamer but it is still a $250 job here in Canada. I would not mind a 22" barrel for the small cartridge, so cutting off the entire chamber and recutting the barrel threads and a fresh chamber seems like an option. Possibly the chamber end was damaged by improper cleaning by the previous owner? Obviously a new barrel is a decent idea and likely what I will pursue, but wanted to explore the alternatives.

Have any users had issues with 17 barrels being less accurate or shorter lived than .204 or .224 barrels?

Thanks for all comments in advance!
dsandfort
Junior Member
Posts: 94
Joined: Thu Aug 09, 2012 12:19 pm
.204 Ruger Guns: Savage 12 BTCSS

Re: Freshen, re-chamber or re-barrel 17 Mach IV?

Post by dsandfort »

I'd just send it back to Cooper for inspection first, then new barrel in the same caliber. I love mine and how can you go wrong with a "17 VarTarg"?
User avatar
Rick in Oregon
Moderator
Posts: 4942
Joined: Thu Dec 01, 2005 4:20 pm
.204 Ruger Guns: Sako 75V, Cooper MTV, Kimber 84M, Cust M700 11 Twist
Location: High Desert of Central Oregon
Contact:

Re: Freshen, re-chamber or re-barrel 17 Mach IV?

Post by Rick in Oregon »

dsandfort wrote:I'd just send it back to Cooper for inspection first, then new barrel in the same caliber. I love mine and how can you go wrong with a "17 VarTarg"?
That's exactly what I'd do too. :chin:
Semper Fortis
Rick in Oregon
NRA Life/OHA/VHA/VVA

Oregon, East of the Cascades - Where Common Sense Still Prevails

Image
Blockcaver
New Member
Posts: 5
Joined: Mon Feb 15, 2016 11:52 am
.204 Ruger Guns: Cooper M21 and Remington 700 w/PacNor 1-11"

Re: Freshen, re-chamber or re-barrel 17 Mach IV?

Post by Blockcaver »

Guys, Thanks for the replies. I had contacted Cooper last year.......with the CA/US exchange rate a new barrel is about $640 Canadian, plus shipping the rifle from Canada to MT and back is likely $250 more due to the extensive paperwork. This is not worth it.......since I wasn't the original Cooper owner there is no warranty. The shorten and re-chamber option is a low cost option I am considering, along with re-barreling to a small bolt face cartridge.
User avatar
Rick in Oregon
Moderator
Posts: 4942
Joined: Thu Dec 01, 2005 4:20 pm
.204 Ruger Guns: Sako 75V, Cooper MTV, Kimber 84M, Cust M700 11 Twist
Location: High Desert of Central Oregon
Contact:

Re: Freshen, re-chamber or re-barrel 17 Mach IV?

Post by Rick in Oregon »

In that case, it's a no-brainer.....rebarrel to 20 Vartarg and have the best of both worlds!

My Sako Vixen 17 M4 hardly gets shot any more now that a 20VT resides in the safe. Trust me, build a VT and you'll see what all the fuss is about. :D
Semper Fortis
Rick in Oregon
NRA Life/OHA/VHA/VVA

Oregon, East of the Cascades - Where Common Sense Still Prevails

Image
dsandfort
Junior Member
Posts: 94
Joined: Thu Aug 09, 2012 12:19 pm
.204 Ruger Guns: Savage 12 BTCSS

Re: Freshen, re-chamber or re-barrel 17 Mach IV?

Post by dsandfort »

$250 for "paperwork"? :eek:
Post Reply