Shiney new .204 (do not view after eating)

[Wade]

I traded in my H&R Ultra Varmiter and got a Savage 12 with a 26" tube, early indications killing paper told me it was going to be a laser beam, but in the field it is a weapon of mass destruction. I still need to work up a load, I have been burning up all my loads I had for the H&R, any suggestions would be helpful, probably stick with 39gr SBK

Since P-dog season does not start for another two weeks here in Colorado, I got permission to hunt some private land. First day was very promising, today was very windy, but had saw some good action.






The Roommate, does his work usually with a CZ .223 with 40gr V-max, today he broke out the 7mm Dakota 150gr @ 3400. I love to spot for that, WOW! chunks on the powerlines. The pictures are the pieces that were located, sometimes hard to distiguish exactally where it came from and what appendage it really is.

[Joe O]

Check out the loads in the Hodgdon 2010 loading Magazine.Has loads with the IMR 8208 XBR powder,(my first choice).Varget and H4895 work well,as do many others.Load I used last month,out west ,was 28gr of Varget ,Sie 39gr BK,Rem 71/2 primer OAL 2.355.Bullet tension .002-.003.With the Sie 32gr BK I used IMR 8208 XBR ,28.4gr for 4000fps from a 23" G2 Contender.

[WaltherP99]

NICE! Those 12FV's are nice!

[Dave in DE]

awsome pics! but your right not after eating
what model 12 is it? I'm looking for the newest one out, the fcv.

[WaltherP99]

awsome pics! but your right not after eating
what model 12 is it? I'm looking for the newest one out, the fcv.

Can't tell if that is the FCV or not but hte only difference between the FV and FCV is the mag!

That, however, is the new model FV! ;wtg:

[remy3424]

I think most of those hits were just flesh-wounds, rub a little dirt on it and walk it off!!! Wow, not much left to eat on some of those. Nice shooting.

[broncsandwhiskey]

Great story and pics and I know you'll love this rifle and want to get another Savage. Thanks for the post. Ride Up!!!

[TD-Max]

I'd suggest you run a ladder test with Re10x and I think you'll be satisfied with the results.

[M_D]

I haven't worked up any 39 grain loads for my Savage yet, but found a good one for 32 grain Sierras using IMR 8208. The information is in this post: http://www.204ruger.com/forum/viewtopic ... 939#p59939

[Sidewinderwa]

Carnage, I love it! I have had really good luck with H4895 and 39gr Blitzkings in my 204s.