Right now I'm leaning on "Wicked Wanda". There's a story there from way back....... We'll see; nothing firm just yet.

6.5swede: Oh, now I'm really liking this! I gotta start writing all this down for later.....
Thanks Rick now it's making sense. Sounded long with the .075 in the neck figure.Rick in Oregon wrote:Yes, correct, but I don't plan to mess with this chamber until it's rebarrel time. My custom M700 11 twist was chambered to touch with the bullet base at the neck/shoulder junction.TD-Max wrote:With a chamber built with your reamer though and touching the lands you would have quite a bit more bullet in the case correct?
The number I gave earlier was just a guess as to how much was in the case. It's enough to hold the bullet axially straight (TIR=.001 - .0005") and is actually more like .120" as it turns out (silly guess on my part) so with no time available to tweak anything (just hours from leaving), I boxed them up and shot them. If I wanted to reach the lands later, there would be plenty of bullet in the case for the type of shooting I do: load and box them up, take out of box and shoot, put back into box. No worry about being in pockets or feeding through a magazine. Perfectly adequate seating depth for a single shot rifle and being able to reach the lands and still have plenty of bullet in the case.TD-Max wrote:Looking at teh Cooper if you tried to just touch you'd be pretty minimal on seating depth at .053" wouldn't you?
This arrangement would not work through any 204 magazine though; only single shot rifles or a magazine-fed rifle that was fired single shot only.
LaunchesRick in Oregon wrote:The launches were spectacular, so her name needs to reflect all this me thinks.