Page 1 of 1

Reloader 10 and 15

Posted: Mon Oct 10, 2011 5:14 am
by 247sniper
Hi guys,

ref my other post i have decided to go for a tube of reloader 10 and a tube of reloader 15. I think ill start with the x 10 cause the verlocitys seem to be low from the 15 according to the data sheets? Is this true? and the x 10 seems to be the most popular one :)

What would you guys recomend with the x10, starting loads etc and would you start of doing a ladder test to find OCW?

What is the verlocity like with the x10? with the 39 and 40 grainers?

Can anyone confirm that this start and max load data is correct for 39 SBK's and reloader 10.

Thanks for your help guys


Steve.

Re: Reloader 10 and 15

Posted: Tue Oct 11, 2011 8:30 pm
by tundrabob
23.5 of 10x with 40 bergers is reasonable. 24.5 of 10x was listed in sum publications but was too hot for my 12FV.

Re: Reloader 10 and 15

Posted: Tue Oct 11, 2011 11:11 pm
by 247sniper
Thanks mate, what verlocity were you getting with that load? I know accuracy is more important but just curious.

Many thanks

Steve.

Re: Reloader 10 and 15

Posted: Wed Oct 12, 2011 6:00 am
by Tokimini
My most accurate load using 10X and 39 gr BlitzKings is 24.4 grains. I don't know what the velocity is. My sole concern is accuracy.
My average 5 shot group is around .400. My COAL is usually 2.313, although 2.306 shows some promise.