Reloader 10 and 15

Share information about reloading the 204 Ruger.
User avatar
247sniper
Senior Member
Posts: 166
Joined: Sun Jul 24, 2011 1:26 am
.204 Ruger Guns: Custom .204 Ruger !

Reloader 10 and 15

Post by 247sniper »

Hi guys,

ref my other post i have decided to go for a tube of reloader 10 and a tube of reloader 15. I think ill start with the x 10 cause the verlocitys seem to be low from the 15 according to the data sheets? Is this true? and the x 10 seems to be the most popular one :)

What would you guys recomend with the x10, starting loads etc and would you start of doing a ladder test to find OCW?

What is the verlocity like with the x10? with the 39 and 40 grainers?

Can anyone confirm that this start and max load data is correct for 39 SBK's and reloader 10.

Thanks for your help guys


Steve.
tundrabob
New Member
Posts: 7
Joined: Sun Mar 20, 2011 8:10 pm
.204 Ruger Guns: Savage 12Fv 204 Ruger

Re: Reloader 10 and 15

Post by tundrabob »

23.5 of 10x with 40 bergers is reasonable. 24.5 of 10x was listed in sum publications but was too hot for my 12FV.
User avatar
247sniper
Senior Member
Posts: 166
Joined: Sun Jul 24, 2011 1:26 am
.204 Ruger Guns: Custom .204 Ruger !

Re: Reloader 10 and 15

Post by 247sniper »

Thanks mate, what verlocity were you getting with that load? I know accuracy is more important but just curious.

Many thanks

Steve.
User avatar
Tokimini
Senior Member
Posts: 428
Joined: Wed Dec 08, 2010 8:21 am
.204 Ruger Guns: Remington 700 SPS with a Shilen barrel
Location: Victor, NY

Re: Reloader 10 and 15

Post by Tokimini »

My most accurate load using 10X and 39 gr BlitzKings is 24.4 grains. I don't know what the velocity is. My sole concern is accuracy.
My average 5 shot group is around .400. My COAL is usually 2.313, although 2.306 shows some promise.
Post Reply