SmallCaliberCentral

I started with 5 at 26gr. 5 at 26.2gr. and 26.4 gr all with a COAL of 2.300". I shot at 50yds. just to test the loads and the 26.2gr put 4 rounds in one hole barely bigger than a single bullet hole with the fifth about 1/4" to the left of it. The outside Temp. was in the upper 80s with no signs of over/under pressure. I'm looking for mainly accuracy for punching paper. I plan to move out to 100yds. next to better test. Any opinions/suggestions are welcome the rifle I'm using is a CZ 527 Varmint in Kevlar. Thanks!

Ishot that combo of bullet and powder ,out of a G2 Contender,and worked up to 30 grains,right at 4000fps with good accuracy.

Thanks for the reply, I've got some reloader 10x I think I will try next.