Guys,
Am anxious to go test my new Remi VSSFII. I am going to shoot 39 SBKs first with some 10X. How much works for you and what is the max load? Also, any other powders work great with this bullet?
Thanks!
New VSSF, how much 10X?
-
- New Member
- Posts: 7
- Joined: Fri Mar 26, 2010 8:02 pm
- .204 Ruger Guns: Remington VSSF .204
-
- New Member
- Posts: 37
- Joined: Fri Apr 02, 2010 5:17 pm
- .204 Ruger Guns: Remington 700
- Location: Post Falls, ID
- Contact:
Re: New VSSF, how much 10X?
Check out the 204 Load data link at the top of the page!!
Larry
Real rifles have wood stocks!!
Savage 93 .17HMR, 3-9 BDC
Remington 700 SPS .204 Ruger, 6-24 Mildot
Remington 788 22-250 Leopold FX12
Real rifles have wood stocks!!
Savage 93 .17HMR, 3-9 BDC
Remington 700 SPS .204 Ruger, 6-24 Mildot
Remington 788 22-250 Leopold FX12
-
- Senior Member
- Posts: 227
- Joined: Sun Feb 10, 2008 5:01 pm
- .204 Ruger Guns: Remington 700 VTR
- Location: Minnesota
Re: New VSSF, how much 10X?
I've just started playing around with R10X not long ago and my accuracy load with 39SBK's is 24.4 grns using Fed 205 primers. This isn't a max load but my groups do increase in size-so far anyway-as I increase the powder charge. You'll just have to play around with it in your rifle.
-
- New Member
- Posts: 1
- Joined: Sat Jan 17, 2009 6:44 pm
- .204 Ruger Guns: encore prohunter
Re: New VSSF, how much 10X?
i shot reloader 10x in my encore prohunter i started out with 24gr of rl-10x and a 39 gr bks and maxed out at 25.1 by book shot best at around 24.7 .078 at 50 yrds .197 at 100 yrds i shoot a few at 25.3 grouped ok less than 1 inch at 100 yards this gun will drive tack with 39 gr bks and rl-10x at 24.7-24.9.good day to you all.
-
- Senior Member
- Posts: 417
- Joined: Fri May 23, 2008 7:30 pm
- .204 Ruger Guns: Remington Model 700 VSF 204 Ruger
- Location: Manitoba Canada
Re: New VSSF, how much 10X?
My VSF LOVES 10X!! Best load is 25.1 grains with the 39 grain sierra, load consistantly groups into less than .375" for 5 shots and is devastating downrange! I have gone up as high as 25.7 grains but accuracy suffers at that charge. A few between 25.1 and 25.7 were also good, just not as consistant. My remy seems to live and be happy right around MAX charges of most any powder. I would suggest you use advertised data and go from there. It appears to be popular to go well above max with this powder in the 204 and I have done it myself. Do so in 1/10 grain intervels and at the first sign of pressure.....back it DOWN! I have not found the upper end for this powder in my gun yet and I never will. The 25.1 grain charge is wicked accurate and fast.....why mess with it? Good luck there bud!
Remington Model 700 SPS 17 Remington Fireball Nikon Buckmaster 6-18X40SF, Remington Model 700 VSF 204 Ruger Bushnell Elite 4200 6-24X40AO, Savage Model 12 FVSS .22-250 Remington Bushnell Elite 4200 6-24X40AO
-
- New Member
- Posts: 43
- Joined: Mon Feb 08, 2010 2:52 pm
- .204 Ruger Guns: Cooper Montana Varminter
- Location: New York/Vermont Border
Re: New VSSF, how much 10X?
I use between 24.4 and 24.7 of 10x when using 39g SBK's. Accuracy works best in my 1:12 twist Cooper between 3600 and 3650 fps. On hot summer days I go down as low as 24.4 and on cooler days use 24.6 or 24.7. Accuracy drops off just a bit at speeds above 3650.
Cooper Montana Varminter (.204 Ruger) with Swarovski Z5 3.5-18x44 (Ballistic Turret/Plex reticule)
-
- Senior Member
- Posts: 169
- Joined: Thu Jul 26, 2007 6:42 am
- .204 Ruger Guns: Rem 700, Tika T3, Ruger 77R MKII., Savage Pred., Rem XR100 +
- Location: Iowa, Plymouth Co.
Re: New VSSF, how much 10X?
How is it coming Hawkeye???
Take a kid to the range, both of you will be glad you did. remy3424