SmallCaliberCentral

Anybody doing any loading with Accurate 2495? Checking here and the Accurate website I haven't been able to find any data. I'm particularly interested in 32 grain loads. Thanks...

i would like to know to

i found some data,the bullet is 35 berger
22.5 3273 26.5 3862 max

I tried some last fall. 29 grains pretty much fills up the case. Velocity with 32 gr Sierra BlitzKings was 4108 average for five shots. grouped just under an inch out of my Ruger 77V/T no pressure signs.. I have other loads that are faster and more accurate, so i did'nt go any further with load development with 2495.

i loaded up some with 39bk looks very promising,ill post later what it grouped!

well to start off,i couldnt get to my shooting spot,weve had a little over 4 inches of rain,so i shot by the house with a bench i built which isnt the best! the one i go to is cemented in and very solid. but i think once i get to my spot the groups will shrink because i messed up on a few which screwed up my groups.
hornady brass,cci 450 primers,xmr2495,sierra 39bk no signs of pressure at all
gun is a ar15 .204,model 1 sales upper 24" ss fluted
26.4 less than 5/8
26.6 had 2 almost same hole,pulled 3rd, 7/8 group
26.8 pulled 1st shot 1" group
27.0 5/8
loaded up 26.6,27.0,27.2 and ill try again ltr

Thanks for the input. I'll load some up and post my results when I shoot 'em...

went back today,little wind,but solid bench.
27.0,27.2 1/2 " groups,but i still think i can get them to group better.
i tried h4895,27.4 group a tad over 1/4" 39bk