50grain berger bullets

Share information about reloading the 204 Ruger.
adam
Senior Member
Posts: 129
Joined: Tue Jan 09, 2007 3:45 pm
Location: carmarthen s.wales

50grain berger bullets

Post by adam »

Has anyone tried these? I have a 26inch barrel with a 10 twist and was wondering if they would perform ok?
' Your here for a good time, not a long time'
BabaOriley
Senior Member
Posts: 312
Joined: Sat Apr 05, 2008 12:21 am
.204 Ruger Guns: Dtech AR
Location: SE MN

Re: 50grain berger bullets

Post by BabaOriley »

I shot some of these early last year using H4895 and Varget just to see if they would be stable and they were in my 23" 1:10 Shilen. Late last year I did some workup using Ramshot TAC, and while it doesn't look like TAC is "the" powder for this bullet, I did find one accurate load at 100 yards so far. More testing with this one is needed. I mainly want to test Varget and RL-15 with this bullet now.

50gr Berger HP
2.247" COAL (base to tip) to fit/feed in AR magazine. I have not played with loading these longer. This length is under minimum recommended for this long bullet, but I didn't want to have to single feed in my AR. I probably will load up a ladder to test these at longer lengths. If this load could shoot 1 hole groups it'd be fun at the range.
25.1gr Ramshot TAC
Rem 7 1/2 BR primer
WW brass
~3500fps

Tip for you guys wanting to post text like this without your columns getting all skewed when the message board removes the spaces. Paste your text in between the [c0de]*[/c0de] tags, and your plain text columns will stay aligned. :D

Code: Select all

+----------------------------- Program Inputs ---------------------------------+
|                                                                              |
+---- Bullet Inputs -----+----Atmosphere Inputs ----+-------Sight Inputs ------+
| Caliber: 0.204 inches  | Temperature:  80 degrees | Sight Height: 1.8 inches |
| Weight:  50 grains     | Pressure: 29.92 inHg     | Zero Range: 200 yards    |
| G7 BC: 0.144 lb/in^2   | Humidity:  75 %          | Look Angle:   0 degrees  |
| G7 Form Factor: 1.192  | Density: 0.07278 lb/ft^3 |                          |
| MZL Velocity:  3500 fps| Wind Speed: 10 mph       |                          |
|                        | Wind Direction: 3 O'clock|                          |
+------------------------+--------------------------+--------------------------+


+----------------------------- Program Output ---------------------------------+
       Range    Velocity    Energy     Trajectory         TOF          Drift
      (yards)     (fps)     (ft-lb)     (inches)         (sec)       (inches)
          0      3500        1360          -1.80         0.0000         0.00
         25      3414        1294          -0.85         0.0217        -0.05
         50      3329        1230          -0.08         0.0439        -0.19
         75      3245        1169           0.48         0.0668        -0.44
        100      3161        1109           0.85         0.0902        -0.79
        125      3078        1052           0.99         0.1142        -1.25
        150      2997         997           0.91         0.1389        -1.83
        175      2916         944           0.58         0.1643        -2.52
        200      2836         893          -0.00         0.1904        -3.34
        225      2757         844          -0.85         0.2172        -4.29
        250      2680         797          -1.99         0.2448        -5.38
        275      2603         752          -3.43         0.2732        -6.61
        300      2528         710          -5.19         0.3024        -7.98
        325      2454         669          -7.29         0.3325        -9.51
        350      2382         630          -9.75         0.3636       -11.20
        375      2310         593         -12.60         0.3955       -13.06
        400      2240         557         -15.85         0.4285       -15.09
        425      2171         523         -19.54         0.4625       -17.31
        450      2103         491         -23.68         0.4976       -19.71
        475      2037         461         -28.32         0.5338       -22.32
        500      1971         431         -33.48         0.5713       -25.14
        525      1907         404         -39.20         0.6099       -28.18
        550      1844         377         -45.52         0.6499       -31.45
        575      1781         352         -52.47         0.6913       -34.96
        600      1720         328         -60.12         0.7342       -38.73
I've said it before, and I should say it again. I think the spirit of the FAST .204 Ruger is lost when shooting a heavier bullet like this. I know people on this board that can shoot higher BC, heavy bullets in their .223AI at 3800fps or more. Looking at the drop in the chart above, I think there's many other calibers that offer more when pushing 600+ yards. I know I've read about guys getting 6" groups at 800 yards with their LRPV, but how common is that? Do I think I could go out and buy one and do it? NO. Would I spend $2500 to tweak out a Rem or Savage to do it? Not before buying 2 or 3 other calibers I suspect would do it easier. I know someone will say "But you have less recoil in a .204 and it's still effective at 500 yards." Yes, but while still very mild, shooting a 50gr bullet does introduce a little recoil. I hate sounding like I'm trashing the .204, because I'm NOT. I still love it. I just think it has limits many choose to ignore for whatever reason. I guess it can be expected on this forum, which is the best source for info for fans of the .204 Ruger, but let's keep it real guys.
BabaOriley
Senior Member
Posts: 312
Joined: Sat Apr 05, 2008 12:21 am
.204 Ruger Guns: Dtech AR
Location: SE MN

Re: 50grain berger bullets

Post by BabaOriley »

I hope what I said above didn't sound like I'll stop shooting this bullet. I have over 300 left, after picking up 300 at $14/100 with free shipping at Cabelas last fall. :party1:
Guy M
Senior Member
Posts: 405
Joined: Sun Mar 11, 2007 11:58 am
Location: Washington state

Re: 50grain berger bullets

Post by Guy M »

I believe Berger recommends a 1:9 twist for their 50 gr and a 1:8 twist for their 55 gr .204 bullets.

Some guys have trouble getting the 40 gr V-Max to stabilize in their 1:10 twist rifles - but it is a long bullet for 40 grains.
User avatar
Rick in Oregon
Moderator
Posts: 4942
Joined: Thu Dec 01, 2005 4:20 pm
.204 Ruger Guns: Sako 75V, Cooper MTV, Kimber 84M, Cust M700 11 Twist
Location: High Desert of Central Oregon
Contact:

Re: 50grain berger bullets

Post by Rick in Oregon »

I have not and will not try the 50's (too slow for varmints for me), but my 11 twist 204 just loves the 40gr V-Max's, producing nice round groups, but they shoot very sloooow in my rifle.

Image

I've got 500 40gr V-Max's in the original unopened boxes I'll trade for Noslers or Sierra BK's. Anyone interested?
Semper Fortis
Rick in Oregon
NRA Life/OHA/VHA/VVA

Oregon, East of the Cascades - Where Common Sense Still Prevails

Image
Post Reply