Page 1 of 1

40gr Bergers anyone

Posted: Thu Dec 10, 2009 11:08 pm
by Idyoter
Hello everyone, I'm new to the forum and it looks like there is a lot of great info here. I have a cz 527 varmint and I have had great luck with the 35grain Bergers over a max load of H-4895 from the Hodgdon data page. I'm wondering if anyone has any data for the 40grain bergers. Any info would be great. I don't really have any reason to swich to the 40 but I am assuming that they will perform better at longer ranges. So far I have taken three coyotes and a bagder with the 35gr load mentioned above. The shots were from 30 to 200yards and the kills were very clean with almost nonexistent pelt damage.

Re: 40gr Bergers anyone

Posted: Fri Dec 11, 2009 8:25 am
by giterdone
I have had good luck (5 shots in .250" or smaller) with the 40gr. Bergers using 25.1gr of RL-10X with Rem. 7 1/2BR primers in both Remington and Winchester brass C.O.L. 2.256-2.260" (3750fps) YMMV :redx:

Re: 40gr Bergers anyone

Posted: Fri Dec 11, 2009 10:59 am
by Idyoter
Thanks for the load Getrdone, what twist are you shooting?

Re: 40gr Bergers anyone

Posted: Fri Dec 11, 2009 10:13 pm
by giterdone
Idyoter.... I shoot 40gr. Berger Varmint bullets in my T/C Encore .204 Ruger Stainless Barrel but they are coated with WS2 and they will group .75 @ 200 yds (5 shots). Now un-coated Hornady's (40gr.) will make egg shaped holes in the target @ 100 yds. So I shoot 32gr. Hornady's and WS2 (danzac) coated 40gr. Bergers and stay away from the others using my T/C "Encore barrel". The Savage 12 VLP and 12 LRPV that I have in .204 both digest the 39gr. Sierra BlitzKing's and shoot in the .1's and .2's, so I dont use anything else in them. The only .204 that I use a coated (WS2) bullet in is the T/C Encore and it seems to help. Some times you have to push them a little faster to get them to stabilize. All three have 1-12" twists. YMMV :spin:

Re: 40gr Bergers anyone

Posted: Sat Dec 12, 2009 12:07 am
by badhop
I've had excellent groups out of my Remington SPS Varmint working up a load using 40gr Bergers (24.5gr H-322, Rem 7 1/2 primers.COL 2.250" Remington brass trimmed to 1.840"). 5 shot groups were averaging under 1/2". This will be my coyote hunting load. The 35gr Bergers work great on coyote's, so I think this should be even better. Berger bullets are the most accurate and deadly pill made IMHO.

Re: 40gr Bergers anyone

Posted: Sat Dec 12, 2009 8:02 am
by Ray P
Yep.......H-4895/ 27.0/ 40 Berger 5 shot group .158 @ 100 yards,
Ramshot TAC/ 27.5/ 40 Berger 5 shot group .311 @ 100 yards.
Custom Hart barrel 1 in 12 finished at 26" on a Rem 700 action.
Great bullet, but the Sierra 39 grn has a better BC.
Later and Merry Christmas to all!!
Ray P

Re: 40gr Bergers anyone

Posted: Sat Dec 12, 2009 1:09 pm
by jo191145
Still love this group :lol:

40 Bergs on top of 25.3gns Benchmark. 2.275 COL. Fed 205M primers.
Believe it or not my VLP punched this group at 200yds. Just don't ask me to do it again ;)


Image

Re: 40gr Bergers anyone

Posted: Sat Dec 12, 2009 1:13 pm
by Idyoter
Thanks for all the great info guys. I just got some loads worked up with 322 and the 40s and I think I will definately be trying the 4895 load I've had great results with that powder.