20 inch M77 hawkeye load.

Share information about reloading the 204 Ruger.
Dogkiller
New Member
Posts: 11
Joined: Mon Feb 04, 2008 2:01 am
.204 Ruger Guns: Ruger Hawkeye Stainless, Ruger Target
Location: Utah

20 inch M77 hawkeye load.

Post by Dogkiller »

I am working up a load for a Ruger M77 hawkeye 20 inch barrel (Shortend and crowned). Does any one have a pet load for the 45 gr. Hornady spire point yet?

Or a pet coyote load for this setup regardless of bullet wieght. I would like to stick with something that will not shatter on bone as bad as the varmint bullets.
User avatar
Rick in Oregon
Moderator
Posts: 4942
Joined: Thu Dec 01, 2005 4:20 pm
.204 Ruger Guns: Sako 75V, Cooper MTV, Kimber 84M, Cust M700 11 Twist
Location: High Desert of Central Oregon
Contact:

Re: 20 inch M77 hawkeye load.

Post by Rick in Oregon »

DK: You may want to try working up a load with the Berger 35 grainer, as most guys using the 204 for dogs have had excellent results, both in good, quick kills, and minimal pelt damage.

The Berger 35 is also a very accurate bullet out of a .204, and if your rifle has a 12 twist, it may shoot better too.
Semper Fortis
Rick in Oregon
NRA Life/OHA/VHA/VVA

Oregon, East of the Cascades - Where Common Sense Still Prevails

Image
Dogkiller
New Member
Posts: 11
Joined: Mon Feb 04, 2008 2:01 am
.204 Ruger Guns: Ruger Hawkeye Stainless, Ruger Target
Location: Utah

Re: 20 inch M77 hawkeye load.

Post by Dogkiller »

Thanks, I will get some on order.
Post Reply