Variances between powder lots

Share information about reloading the 204 Ruger.
Bergcrane2
Senior Member
Posts: 222
Joined: Wed Jan 04, 2006 7:58 am
.204 Ruger Guns: Remington VSSF II
Location: Michigan, USA
Contact:

Variances between powder lots

Post by Bergcrane2 »

I know the powder manufacturers say to start with a minimum load when using a different lot of powder, even if it's the same powder, and work up to a load. BUT, has anyone seen differences between Lots? How unsafe is it to just jump in and cook up a batch of your favorite load with a new lot?
User avatar
glenn asher
Senior Member
Posts: 840
Joined: Wed Feb 09, 2005 6:25 pm
.204 Ruger Guns: Savage 12fvss, CZ 527 American
Location: kentucky
Contact:

Post by glenn asher »

Spherical powders are more prone to changes than stick powders, sometimes H-335 can be pretty spooky in different lots. I seldom run my loads too awfully hot, and have never had any troubles, but I have noted some spooky stuff with certain pistol powders.
Then, too, some flake powders from Alliant (the old Hercules company) have been changed a lot over the years. Unique was changed considerably some years back, so it would burn cleaner, I think 2400 was changed, also. I haven't used them since the changes took place, but it was recommended to back them off quite a bit when starting with the newer stuff. Supposedly, the newer powder was engineered to give the results of the older propellents, but sometimes "things happen". It's good advice to recheck each time you change lot numbers, I think. (it's also a good reason to buy those 8 pound jugs!).
Build a man a fire, and he's warm for a day. Set a man on fire and he's warm for the rest of his life!
Bergcrane2
Senior Member
Posts: 222
Joined: Wed Jan 04, 2006 7:58 am
.204 Ruger Guns: Remington VSSF II
Location: Michigan, USA
Contact:

Post by Bergcrane2 »

Good point about buying the 8#ers. I'm using RE10X right now. Being it's a fairly new powder, you'd think they may play with the formula a bit. I'm running lower than I thought and I have 200 new 39gr SBK's and brass coming tomorrow from Midway.
User avatar
jo191145
Senior Member
Posts: 1064
Joined: Sun Sep 25, 2005 7:23 pm
Location: Central CT.

Re: Variances between powder lots

Post by jo191145 »

In the past R-10x had a reputation for some drastic variations between lots. Silverfox ran into some trouble with it. Always best to drop down a bit and work up.
Image

Image
Savage VLP + NF 12x42 + 35 Bergers = .
bk63044
New Member
Posts: 17
Joined: Sun Jul 29, 2007 1:25 pm
Location: St. Louis, MO

Re: Variances between powder lots

Post by bk63044 »

All of the powders that I have checked has had some variations lot to lot, it may be just a very slight variation. Powder as it gets older can also change. We spend alot of time to see that our powder stock is rotated properly. Where I work we always have over a 1000 pounds of powder in stock all of the time, so it can be a chore.
User avatar
Verminator2
Senior Member
Posts: 375
Joined: Wed Dec 27, 2006 11:03 am
.204 Ruger Guns: DPMS 24" stainless fluted.
Location: Eastern OR
Contact:

Re: Variances between powder lots

Post by Verminator2 »

Well, the powder that I used to shoot those groups with was probably over 5 years old (IMR 4895 that came in a tin can) I picked some new powder up. Do you think that this new powder would make much of a difference in my groups?
Bomb Squad: If you see me running, try and keep up
WrzWaldo
Senior Member
Posts: 745
Joined: Mon Dec 18, 2006 10:34 am
.204 Ruger Guns: Remington XR-100 / Savage-Douglas-Richards

Re: Variances between powder lots

Post by WrzWaldo »

Verminator2 wrote:Well, the powder that I used to shoot those groups with was probably over 5 years old (IMR 4895 that came in a tin can) I picked some new powder up. Do you think that this new powder would make much of a difference in my groups?
Yes, No, Maybe?


You really won't know until you shoot some.

If you are loading near the top end of the published data you will probably want to back off a couple percent and work back up to your current load.
Post Reply