Page 1 of 1
BL C(2) and Sierra 39 gr BK help
Posted: Tue Aug 02, 2016 5:44 pm
by Irish Lad
I see on this site this is a popular load. Does anybody know of a site or manual for this load. I checked the Sierra and hodgdon site and Lyman's manual and can't find any load data. Being relatively new to reloading I like to use "official" load data. Thanks
Re: BL C(2) and Sierra 39 gr BK help
Posted: Wed Aug 03, 2016 12:27 pm
by Jim White
On the Hodgdon website if you select 40-grain it comes up with the Hornady VMAX. The bearing surface of a 39 SBK is .328" and for the 40 VMAX its .306" by measurements with a comparitor. I have tested the same loads with each bullet in my 204's up to the MAX recommended loads and I've never experienced any excessive pressure issues or indications.
HTH
Here s the link to the website
http://www.hodgdonreloading.com/data/rifle
Re: BL C(2) and Sierra 39 gr BK help
Posted: Wed Aug 03, 2016 12:31 pm
by Irish Lad
Thanks.
Re: BL C(2) and Sierra 39 gr BK help
Posted: Thu Nov 24, 2016 8:38 am
by truckerwalt
with the .204 39 gr. sierra's , 25 grains H-322 powder and rem. 7.5 primers if you can find them work great