SmallCaliberCentral

Need load data for 32gr nosler ballistic tip bullets using rl-10x and/or h4895. The reason for these powders is that have ample supplies. Have been to nosler, alliant and hodgdon websites, none of the combinations are addressed. Looking for 'safe' load ranges, min/max. I'm a rookie only been reloading a couple of years. So any info will be helpful. Thank you in advance.
Dan

In your reloading manuals, just look for any load using these powders and a 32 gr. bullet combination. If you start at the low end, you should be OK. But as recommended with any unknown combination, start at the low end of the recommended loads and work your loads upwards slowly and be diligent looking for pressure signs. This should be practiced anytime you change any component in your reloads.

We should have to do reloading in a smooth manual process to have a better results. It can also prevent damage or any accidents if we do it smoothly.