I'm worried: 32 gr VMax

[bow shot]

just to keep it honest, this one is 350 steps...:

[dozernomore]

There should be a drool emoticon, LOL!!

lol,,,likely never be able to that again either,,,,actually doing up some 40gr v-max loads and h4895 right now for a ladder test this weekend,,,just weighed all my brass,,and bullet's,,gonna do 0.1 gr increments from 26-27.4

[bow shot]

'Funny you should mention that, I loaded up some 40 gr VMax rounds for a ladder a while back, but blew the whole smash because I was still under the severe misconeption that "the wind doesn't matter" (what a dope..).

When I look at the prints, some of the 40grs had great accuracy if I take out the horizontal. I loaded up another batch, and will be trying it again when I can get a calm day.

[dozernomore]

that 32gr load I did,was on saturday and the 100 meter range is well surrounded by trees,barely a breeze,,when I went back sunday to chrono the load(wich averaged 3677 fps),,and shoot them at the 300meter range,,100m not affectted much by wind,200m about an inch off,300m about 2-3 inches off,,and that was with 135deg wind 8-10 mph from behind,,wind definitely blows those lil 32's around

[dozernomore]

but the 40 grain V-max loads are gonna be a new topic and post..lol

[bow shot]

Yup, I'll likely be crying for mommy when I get going with that...LOL!!

[bow shot]

The 40 gr VMax's did very well. I was printing 5 shot groups of 0.5" @ 100y, with my best load. I think I can shrink it down a tad if I can settle on good shooting form. I realizing that I'm not very good, LOL!!