WS2 Coated Bullets

Share information about reloading the 204 Ruger.
User avatar
204Shooter
Senior Member
Posts: 183
Joined: Mon Jan 24, 2005 10:23 pm
.204 Ruger Guns: Ruger M77II Ultralight
Location: Utah
Contact:

Re: WS2 Coated Bullets

Post by 204Shooter »

There are a couple of us that should have some good chrono data in the next few weeks. I'm working on 2 boxes of 35 Bergers, I'll be shooting both coated and naked of the same loads. I'm hoping to shoot naked (bullets) this Saturday, and coated on Sunday.
I will be anxiously awaiting your results. If there is a significant improvement in velocity between naked and coated bullets, that will be good enough for me!
Marriage is the only sport where the trapped animal has to buy the license! ... Just kiddin honey! :hail:
MinotBob
New Member
Posts: 48
Joined: Mon Jul 09, 2007 8:23 am
.204 Ruger Guns: T/C Contender G2 .204 Ruger
Contact:

Re: WS2 Coated Bullets

Post by MinotBob »

Well my kid brother said I got 1# of WS2 in the mail yesterday so it looks like I have enough for a while. Won't be able to get to try any out until January though :(
MinotBob
User avatar
Silverfox
Senior Member
Posts: 937
Joined: Tue Feb 01, 2005 1:51 pm
.204 Ruger Guns: Savage 12VLP purchased in June 2004 + 2 other custom .204s
Location: NW North Dakota

Re: WS2 Coated Bullets

Post by Silverfox »

MinotBob--I understand you received a whole pound of WS2 in the mail just the other day, so maybe this is too late, but I'll put it in here anyway. That one pound of WS2 may well be enough to coat an entire automobile!!!!

To answer your question about what the particle size of the WS2 WrzWaldo said he was using to coat bullets, here's a quote from the very first post in this thread from WrzWaldo's own words about the size of the WS2 particles (color and bolding added by me):
I can buy the bullets and coat/send them or you can send me the bullets you want coated. I am limiting this to 17/20 calibers right now and in lots of 50. Coating will be with .6 micron WS2.
Catch ya L8R--Silverfox
WrzWaldo
Senior Member
Posts: 745
Joined: Mon Dec 18, 2006 10:34 am
.204 Ruger Guns: Remington XR-100 / Savage-Douglas-Richards

Re: WS2 Coated Bullets

Post by WrzWaldo »

Yep I'm using .6 micron, that should be about 0.000023622"...

WW
User avatar
Rick in Oregon
Moderator
Posts: 4942
Joined: Thu Dec 01, 2005 4:20 pm
.204 Ruger Guns: Sako 75V, Cooper MTV, Kimber 84M, Cust M700 11 Twist
Location: High Desert of Central Oregon
Contact:

Re: WS2 Coated Bullets

Post by Rick in Oregon »

I've said this before, but after using WS2 now for about 5 years, and coating literally thousands of bullets, I'm still using my original 4 oz tub of the stuff!

I'm coating 17, 20, 22, 6mm, 277, 308, and .338 bullets with it too. The stuff appears to last forever.....Bob, Silverfox may be right, you could coat your truck with a full pound! :eek:
Semper Fortis
Rick in Oregon
NRA Life/OHA/VHA/VVA

Oregon, East of the Cascades - Where Common Sense Still Prevails

Image
MinotBob
New Member
Posts: 48
Joined: Mon Jul 09, 2007 8:23 am
.204 Ruger Guns: T/C Contender G2 .204 Ruger
Contact:

Re: WS2 Coated Bullets

Post by MinotBob »

Silverfox wrote:MinotBob--I understand you received a whole pound of WS2 in the mail just the other day, so maybe this is too late, but I'll put it in here anyway. That one pound of WS2 may well be enough to coat an entire automobile!!!!

To answer your question about what the particle size of the WS2 WrzWaldo said he was using to coat bullets, here's a quote from the very first post in this thread from WrzWaldo's own words about the size of the WS2 particles (color and bolding added by me):
I can buy the bullets and coat/send them or you can send me the bullets you want coated. I am limiting this to 17/20 calibers right now and in lots of 50. Coating will be with .6 micron WS2.
Thanks Silverfox. I figgered that out just after I asked. Anyway the 1# was $45 from a Canadian outfit and I figgered that we can use this for more conventional lubricant uses also. I wonder if it would improve the gas mileage on my 7.4L Suburban? It's already gray so.... Naw too many BB's.
MinotBob
User avatar
Silverfox
Senior Member
Posts: 937
Joined: Tue Feb 01, 2005 1:51 pm
.204 Ruger Guns: Savage 12VLP purchased in June 2004 + 2 other custom .204s
Location: NW North Dakota

Re: WS2 Coated Bullets

Post by Silverfox »

204Shooter--I don't think the test results are going to show a "significant improvement in velocity between naked and coated bullets" as you mentioned in your last post, if you were thinking the coated bullets would fly faster than the bare bullets. Maybe I don't understand what you meant by the statement below :huh: :?: :huh:
I will be anxiously awaiting your results. If there is a significant improvement in velocity between naked and coated bullets, that will be good enough for me!
I am quite certain you will find just the opposite. The application of Danzac (WS2 also called tungsten disulphide), IMHO will cause a decrease in velocity if you are using the same powder charge with the coated bullets and the bare bullets. I found that to be true when I did limited testing with moly a long, long, long time ago.

Today, I did a very limited test with some of the 27.8 gr. Hammett bullets I coated for my .17 Remington. My muzzle velocity with these 27.8 gr. Hammett bullets without any coating has been right in the 3,990 to 4,000 fps range. I only had 8 of the coated bullets loaded up for today's test, so it isn't a BIG sampling, but the first four shots (out of a cold, clean barrel that had been treated with a 20% Danzac/80% alcohol wet patch) averaged 3,708 fps at 12 feet from the muzzle. The first shot out of the barrel was WAAAAAY off to the left. Like I said, this is the load I have been shooting prairie dogs with using bare bullets this summer and had the scope set for a tad over 1 inch high at 100 yards. The next three shots came back to the right a bit and were much better for height, but still way left.

Image

To keep this post in the .204 Ruger vein, I let the rifle cool down while I shot some of my 39 gr. Sierra loads from my Savage 12VLP to get my scope adjusted for coyote season. I shot the first four shots, with shot #1 coming from a freshly cleaned and cold barrel. Shots 2, 3, and 4 were a wee bit lower than I like. I prefer my 39 gr. Sierras to hit about 1 inch high at 100 yards, so I cranked up one click on my Leupold VX-III 6.5-20x40mm long range elevation knob and settled in and fired shot #5. It hit just a tad above 1 inch high and pretty close to the money horizontally so I ejected the spent shell, closed the bolt and put the rifle back in the case. I think I ready for coyotes now :D

Image

The scope I have on my Pac-Nor barreled .17 Remington is a Sightron II 6.5-20x50mm and it has 1/4" adjustment clicks. So, before I shot my last four shots, I did one click down and five clicks right. There was a 10+ mph wind blowing from my left to my right when I shot this last group. My average velocity at 12 feet from the muzzle was up at 3,788 fps when I shot the last four shots of the Danzac coated 27.8 gr. Hammett bullets. Here's the second 4-shot group and YES, I wiggled severly on shot #2, but that's life.

Image

Like I said, this is not a very big sampling, but there definitely was a HUGE difference in velocity noted from what I had been getting with bare bullets and what I was now getting with the Danzac coated bullets using the exact same powder charge. I might add too, that I used the same primers, same seating depth, etc., etc. I will definitely be trying some heavier powder charges with these coated bullets.

As a matter of fact I have a bunch all ready to go right now. Also, I shot five of my 25 gr. Hornady hollowpoint loads with bare bullets after I shot the 8 shots with the Danzac bullets. The 25 gr. Hornady load has been averaging 4,030 fps at 12 feet from the muzzle and today it averaged only 3,902 fps. I think that Dazac is slicker than owl $hit.

The load I was using with the bare 27.8 gr. Hammetts and the coated bullets was 24.8 gr. of N-540. I have loaded up some test loads with N-549 at 25.0 gr., 25.1 gr., 25.2 gr., 25.3 gr., and 25.4 gr. Yes, those are only .1 gr. increments, but I want to go poco a poco and not blow myself up :eek: If the wind ever goes down again, I'll be out at the rifle range doing some more testing.

I have to agree with Rick in Oregon about ease of cleaning the barrel. Yes, I only shot 13 shots before I cleaned, but when I used SLIP 2000 to get the carbon and powder residue out, I did get a wee bit of copper. I got virtually no copper on my patches when I used my copper cleaning solvent. So, I neutralized the bore and ran a patch down the bore using Rick in Oregon's recipe of 20% Danzac and 80% alcohol mixed together to prep the barrel for my next range trip.
Catch ya L8R--Silverfox
WrzWaldo
Senior Member
Posts: 745
Joined: Mon Dec 18, 2006 10:34 am
.204 Ruger Guns: Remington XR-100 / Savage-Douglas-Richards

Re: WS2 Coated Bullets

Post by WrzWaldo »

Like I said, this is not a very big sampling, but there definitely was a HUGE difference in velocity noted from what I had been getting with bare bullets and what I was now getting with the Danzac coated bullets using the exact same powder charge. I might add too, that I used the same primers, same seating depth, etc., etc. I will definitely be trying some heavier powder charges with these coated bullets.
Yep that's about how it goes, pressure goes down and velocity goes down. You will be able to pick the velocity back up with load development for the coated bullets.
Phasor
New Member
Posts: 26
Joined: Tue Nov 29, 2005 4:29 pm
.204 Ruger Guns: Cooper Phoenix
Location: Cheyenne, Wyoming

Re: WS2 Coated Bullets

Post by Phasor »

Another good use for Danzac that I have found is to put a little dab on the sear surface of your trigger. I put some on my Cooper trigger and with not other adjustments it feels like a much better trigger. It may be in my mind, but it sure seems to pull easier. I just coated 200 17 cal Vmax and 100 Berger 35's with it. Will try and get out to do some load testing when the wind dies down a bit.

Phasor
WrzWaldo
Senior Member
Posts: 745
Joined: Mon Dec 18, 2006 10:34 am
.204 Ruger Guns: Remington XR-100 / Savage-Douglas-Richards

Re: WS2 Coated Bullets

Post by WrzWaldo »

Another thing I use it for...

Mix a little with high pressure/temp grease and use on bolt lugs. Mine are now smooth as silk!
User avatar
Hotshot
Senior Member
Posts: 809
Joined: Wed Apr 04, 2007 2:32 pm
.204 Ruger Guns: Savage and ar-15
Location: Rapid City
Contact:

Re: WS2 Coated Bullets

Post by Hotshot »

I wonder how that would be mixed with 7-up. Acloco, have you tried that?
User avatar
jo191145
Senior Member
Posts: 1064
Joined: Sun Sep 25, 2005 7:23 pm
Location: Central CT.

Re: WS2 Coated Bullets

Post by jo191145 »

I've coated the entire inside of my bolts with dry WS2. Degreased all the parts and used a small paint brush. A very very light coat of oil after cleaning eases application.
No longer need to worry as much about gunk build up inside. After disassembling a bolt from a used gun purchase and seeing all the sludge inside I did all my guns this way.

Yep trigger sears and all pivot points treated as well.
I even went so far as to use my finger to apply it dry to the outside of my bolt, lugs and raceways. Works great but must be occasionally reapplied although with less and less frequency.
Sure makes your finger silver though. There seems to be just enough oil on the finger to make it adhere well.
It does make a stainless bolt look dirty but oh so smooth.

A million and one uses.

As for velocity yes its just like moly (only better) Velocity will go down substantially with a given powder charge. The bright side is velocity will rise faster than the pressure which allows you to acheive even higher velocity compared to naked bullets.
Although I haven't done it I know that using Viht 135 and WS2 coated 40gn Bergers I could push them past 4000 fps. Thats not bad now is it.
Disclaimer Dont just rush out and try that though. Lots of little differences between my gun/brass and yours could create a very dangerous load.
Image

Image
Savage VLP + NF 12x42 + 35 Bergers = .
acloco
Senior Member
Posts: 1708
Joined: Mon Sep 25, 2006 8:53 pm
.204 Ruger Guns: 12FV, 12BVSS -S
Location: Nebraska

Re: WS2 Coated Bullets

Post by acloco »

Hotshot wrote:I wonder how that would be mixed with 7-up. Acloco, have you tried that?
I had the flu for 3.5 days last week...if THAT is what you are referring to! :)

NOT fun!
Bad Dad
Junior Member
Posts: 64
Joined: Mon Nov 27, 2006 11:55 am
Location: Colorado Springs

Re: WS2 Coated Bullets

Post by Bad Dad »

I know that Moly can be corrosive in a humid environment, but what about WS2? Anyone have any data to say it's not? Just wondering if it's ok to pre-treat the barrel after cleaning and put it away for next time or if you should pre-treat just before shooting?
"Bad Dad" Given to me by my 8 year old son after watching a 60's movie were I had to explain “BAD” as being “Awesome, Sweet, Rad":cool: . Love that kid
User avatar
Rick in Oregon
Moderator
Posts: 4942
Joined: Thu Dec 01, 2005 4:20 pm
.204 Ruger Guns: Sako 75V, Cooper MTV, Kimber 84M, Cust M700 11 Twist
Location: High Desert of Central Oregon
Contact:

Re: WS2 Coated Bullets

Post by Rick in Oregon »

From my experience on this: Clean, bare steel barrel lightly coated with protective oil for storage, pre-treat with 20%/80% WS2-denatured alcohol prior to shooting.

This method does not allow any moisture to get in under the coating of WS2 during storage. After using this method for almost ten years, virtually zero signs of any rust or corrosion from moisture in any of my barrels.
Semper Fortis
Rick in Oregon
NRA Life/OHA/VHA/VVA

Oregon, East of the Cascades - Where Common Sense Still Prevails

Image
Post Reply