lets talk powder.....

Share information about reloading the 204 Ruger.
Gamikatsu
New Member
Posts: 16
Joined: Tue Sep 12, 2017 5:49 pm
.204 Ruger Guns: CZ-527 Varming Kevlar/HS

lets talk powder.....

Post by Gamikatsu »

what do you guys seem to have the best results with.....
8208?
CFE223?
Benchmark?
Varget?
4166?
TAC?

I have 39 grain sierra BK's... and plenty of brass... going to use Gold medal Match small rifle primers, and plan on just grabbing one powder for now.... Which do you guys seem to prefer?

Edward
Bill K
Senior Member
Posts: 2324
Joined: Tue Jan 18, 2011 10:00 am
.204 Ruger Guns: also now, a Savage switch bull barrel in 204R. 23 inch SS
Location: Lake Forest, Ca.

Re: lets talk powder.....

Post by Bill K »

8208 is used by many, I started with it, but have gone too CFE 223, for the most part now. 32 & 39 grain bullets. Bill K
Gamikatsu
New Member
Posts: 16
Joined: Tue Sep 12, 2017 5:49 pm
.204 Ruger Guns: CZ-527 Varming Kevlar/HS

Re: lets talk powder.....

Post by Gamikatsu »

i'm fairly certain i'm going to the CFE223. Its just easy to find, and the .204 is a known copper fouler as it is. also it seems as its a good velocity powder as well. Of course in this caliber, I won't be chasing velocity, i want to really hit the gong at 600 yards! I"ll dope the shot as much as necessary!
Bill K
Senior Member
Posts: 2324
Joined: Tue Jan 18, 2011 10:00 am
.204 Ruger Guns: also now, a Savage switch bull barrel in 204R. 23 inch SS
Location: Lake Forest, Ca.

Re: lets talk powder.....

Post by Bill K »

Check out Hogdon's Data site and start a little above their start loads and work up towards max and you will find a load that will show good accuracy in your rifle and you will be please with the FPS also. Bill K
204Nut
New Member
Posts: 17
Joined: Wed Aug 31, 2016 5:26 pm
.204 Ruger Guns: Savage 12 FCV

Re: lets talk powder.....

Post by 204Nut »

H4895 for me.
Getemclose
New Member
Posts: 11
Joined: Sat Jul 16, 2016 4:21 pm
.204 Ruger Guns: sakoczbrowning

Re: lets talk powder.....

Post by Getemclose »

H4895 for me also
triggerfingers
Senior Member
Posts: 119
Joined: Wed May 10, 2017 8:39 am
.204 Ruger Guns: Cooper MTV 204 Ruger, Savage 12 LRPV 20 VT, Cooper MTV 6x45

Re: lets talk powder.....

Post by triggerfingers »

So far I’m have very good results with Reloader 10X.
randyman
Senior Member
Posts: 228
Joined: Fri Aug 19, 2016 1:04 pm
.204 Ruger Guns: .204 on AR platform, .20 Vartarg built from Rem. 700 SA
Location: Butte and Lassen counties in Northern Calif.

Re: lets talk powder.....

Post by randyman »

I've been going back and forth with CFE223 and BL-C (2) mostly due to availability and have had good luck with both. I've also used some 4198 and just got some Reloader-15 to try out. I've found that my Tikka likes some powders at the lower charges and some at higher or max charges. It's time for me to quit fooling around and go with one powder/bullet combination but I just can't help myself and keep trying different stuff. It's my excuse for going to the range to see how something different works. If I had just one powder to use it would be the CFE223. Randy.
Bill K
Senior Member
Posts: 2324
Joined: Tue Jan 18, 2011 10:00 am
.204 Ruger Guns: also now, a Savage switch bull barrel in 204R. 23 inch SS
Location: Lake Forest, Ca.

Re: lets talk powder.....

Post by Bill K »

Randy. Although I have used and like a few others, I am just about 98% settled on CFE223 also in my 223 and 223ai cartridges. Good velocity, right up near top, and accuracy is just fine. Bill K
User avatar
jpx2rk
Senior Member
Posts: 128
Joined: Sun Aug 14, 2016 5:25 pm
.204 Ruger Guns: Savage 12FV, R783/20P combo
Location: East TN

Re: lets talk powder.....

Post by jpx2rk »

I tried Varget but it's a PITA to get into the cases. Benchmark is working good for me right now in my FV12
Master Piddler ;)
randyman
Senior Member
Posts: 228
Joined: Fri Aug 19, 2016 1:04 pm
.204 Ruger Guns: .204 on AR platform, .20 Vartarg built from Rem. 700 SA
Location: Butte and Lassen counties in Northern Calif.

Re: lets talk powder.....

Post by randyman »

I've used Varget myself but after cleaning up more than a couple of charges from the bench and having to crunch thru powder (an Oxymoron) in my powder measure, I tend to go with the smaller grained stuff. Although I got very good results from 4198 (also a stick type) I keep going back to CFE223 because it shoots well and is easy to work with. I haven't tried the Reloader 15 (stick ) yet but hope to load some up this week to see how it does. Randy.
User avatar
brooksb
Senior Member
Posts: 181
Joined: Thu Sep 08, 2016 3:34 pm
.204 Ruger Guns: Ruger M12 FV
Location: up date, we sold in Ca, we are house hunting.

Re: lets talk powder.....

Post by brooksb »

My 22-250 shots very nice groups with Varget, but since I'm burning through a lot of ammo on Belding's I'm sticking with powders that disperse well, so BL-C(2) W/32 V Max's and H4895 for 39 SBK's and since the V-max's are 7 or 8 cents less than the SBK's mostly BL-C.
User avatar
brooksb
Senior Member
Posts: 181
Joined: Thu Sep 08, 2016 3:34 pm
.204 Ruger Guns: Ruger M12 FV
Location: up date, we sold in Ca, we are house hunting.

Re: lets talk powder.....

Post by brooksb »

...talking about my Savage M12 in .204 of course.
Hippy
New Member
Posts: 13
Joined: Wed Mar 07, 2007 4:18 pm
Location: Western Maryland

Re: lets talk powder.....

Post by Hippy »

H-4895
Benchmark
10 X
In that order the 1st 2 for 39/40 10X for 35/32 gr
Winchester brass 7 1/2 Remington

Jim
Gamikatsu
New Member
Posts: 16
Joined: Tue Sep 12, 2017 5:49 pm
.204 Ruger Guns: CZ-527 Varming Kevlar/HS

Re: lets talk powder.....

Post by Gamikatsu »

well, i bought H4895 just so if i didn't like it i could use it in my .30-06 as well... and well, its not going in the 06 :-D....

worked up to an over max book load, 3787 fps and .6" 5 shot group with a flier. .343" 4 shot group without the flier.

Needless to say, i'll deal with the crunch from the powder throw, and the pain getting it into the case.
Post Reply