Decapping die?

Share information about reloading the 204 Ruger.
Irish Lad
New Member
Posts: 7
Joined: Tue Aug 02, 2016 3:38 pm
.204 Ruger Guns: Savage

Decapping die?

Post by Irish Lad »

What decapping die are you using? Thanks.
Bill K
Senior Member
Posts: 2324
Joined: Tue Jan 18, 2011 10:00 am
.204 Ruger Guns: also now, a Savage switch bull barrel in 204R. 23 inch SS
Location: Lake Forest, Ca.

Re: Decapping die?

Post by Bill K »

I use Hornady, RCBS, Redding and Whidden dies and they all have the decapping rod in the FL die. But if I am decapping the military brass, with the crimp, I use a RCBS decapping die made for those. Then I also use the RCBS die set made to remove the crimp and resize the primer/base of the cartridge. Bill K
User avatar
futuretrades
Senior Member
Posts: 835
Joined: Sat Aug 25, 2007 11:16 am
.204 Ruger Guns: HOWA 1500 .204 Ruger Varmint, Bull Bbl, Lupy 6-18x40 custom

Re: Decapping die?

Post by futuretrades »

I have been using a Lee Collet, neck sizing die since I had to have Lee special make one for me, when I got my 204 back in 2007, I believe. Back then, all that was available was the standard dies. Lee was making that die for most other cartridges, but the 204 was a fairly new cartridge. Because I only neck size my brass, it just made good sense to me, and that is still the way I take care of my brass today. Works for me! :wink:
NRA Benefactor Life member
HOWA 1500 Varmint 204 Ruger, Bull Barrel, Hogue Overmold Stock, Leupold VXII 6-18x40mm AO LRV Custom Reticle Timney Trigger
Cooper Mdl 21 20VarTargW/Leupold VXIII, 6-20x40AO Varmint Hunter reticle.
User avatar
RAMOS
Senior Member
Posts: 765
Joined: Sat Nov 21, 2009 9:30 am
.204 Ruger Guns: Savage Model 12 FLV, Cooper M21
Location: Sherman County, Oregon

Re: Decapping die?

Post by RAMOS »

I use a Redding decapping die with the small rod. Use it for all of my cases. Removed the pin from all of my sizing dies. I like to check/clean primer pockets then tumble before sizing. Not the only way to go about it but, that's how I do it.
jepp2
New Member
Posts: 10
Joined: Wed Mar 11, 2015 4:05 pm
.204 Ruger Guns: Cooper 21 Phoenix, Rem 700 VLS, Rem 700 VS SF II

Re: Decapping die?

Post by jepp2 »

I use my Lyman for everything above .20 caliber. The decapping pin is too large for the .20's so I use a Lee decapping die on those.
NRA Benefactor Life member
Irish Lad
New Member
Posts: 7
Joined: Tue Aug 02, 2016 3:38 pm
.204 Ruger Guns: Savage

Re: Decapping die?

Post by Irish Lad »

I ended up buying a decapping die from Sinclair with the optional 17-20 cal adapter. Love it :D .
User avatar
TEXAS222
Senior Member
Posts: 291
Joined: Sun Oct 19, 2014 8:09 pm
.204 Ruger Guns: custom build AR 15-Rem 700 .204 VARMINT- .204 Kimber Pro Var
Location: Southeast Texas

Re: Decapping die?

Post by TEXAS222 »

Irish Lad wrote:I ended up buying a decapping die from Sinclair with the optional 17-20 cal adapter. Love it :D .
That's what I use also before I sonic clean, a Sinclair/Wilson decapping die. Love it also.
Jim D
Apothideus
New Member
Posts: 11
Joined: Thu Dec 18, 2008 7:08 pm
.204 Ruger Guns: AR build with JP Barrel
Contact:

Re: Decapping die?

Post by Apothideus »

I've been using the RCBS case lube die. It's been a while, but I think I had to remove the decapper from my .204 die set and put it in the lube die. So far it's been a nice, clean solution to lubing and removing spent primers.
Post Reply