Best load with Hornady vmax 40 gns Please

Share information about reloading the 204 Ruger.
jam1e
New Member
Posts: 33
Joined: Thu Oct 25, 2012 9:03 am
.204 Ruger Guns: CZ American s/c
Location: Stratford On Avon, England.

Best load with Hornady vmax 40 gns Please

Post by jam1e »

Hi folks,
Sorry to be a pain. I have looked at the load data on the forum, but there always seems to be one thing different to my set-up.
After good advice from this forum i now have a consistant good group with my 32's, in my CZ 527.
However, i'm about to try the Hornady 40gn vmax heads along with IMR 8208 XBR (mainly. Due to less heat effect) But also the Hogdons BL-C 2.
The brass is Winchester and the primers are CCI.
Does anyone of you folks use this set-up, or very close to it that could point me in the right direction as to what powder charge to use? Generally speaking i seem to get better overall accuracy with higher loads.
Any tried and tested accurate loads would be appreciated.
User avatar
bow shot
Senior Member
Posts: 778
Joined: Fri Jul 24, 2009 8:04 am
.204 Ruger Guns: Rock River Arms AR-15 Varminter
Location: Central NY: infested with liberal wack-jobs and their damage

Re: Best load with Hornady vmax 40 gns Please

Post by bow shot »

Jamie, just go check out the "Favorite Loads" thread

Enough recipies there to give you a headache, LOL!!
jam1e
New Member
Posts: 33
Joined: Thu Oct 25, 2012 9:03 am
.204 Ruger Guns: CZ American s/c
Location: Stratford On Avon, England.

Re: Best load with Hornady vmax 40 gns Please

Post by jam1e »

Thats the problem bow shot!
I've looked at sooo many pages but theres always one ingredient missing!
It's never ending and i don't gent the right recipe :?
User avatar
Rick in Oregon
Moderator
Posts: 4942
Joined: Thu Dec 01, 2005 4:20 pm
.204 Ruger Guns: Sako 75V, Cooper MTV, Kimber 84M, Cust M700 11 Twist
Location: High Desert of Central Oregon
Contact:

Re: Best load with Hornady vmax 40 gns Please

Post by Rick in Oregon »

jam1e: Are you in possession of a recent edition of a reloading manual?
Semper Fortis
Rick in Oregon
NRA Life/OHA/VHA/VVA

Oregon, East of the Cascades - Where Common Sense Still Prevails

Image
jam1e
New Member
Posts: 33
Joined: Thu Oct 25, 2012 9:03 am
.204 Ruger Guns: CZ American s/c
Location: Stratford On Avon, England.

Re: Best load with Hornady vmax 40 gns Please

Post by jam1e »

Hi Rick,
Yes i have. It's the 2nd Edition Modern Lee reloading manual.
I know each gun suits different loads, but i was just trying to find some tried and tested loads and give them a go first.
I have a strict regime when reloading and never go outside the recommended min or max loads.
Jamie
broper
Senior Member
Posts: 318
Joined: Tue Jan 06, 2009 4:12 pm
.204 Ruger Guns: Remington 700 sps
Location: Parma, Idaho

Re: Best load with Hornady vmax 40 gns Please

Post by broper »

jam1e,
BLC(2) is about all I use in my .204. I shoot 30 gr., Win. brass, Rem. 71/2 primers with the 40 gr. V-Max. That is pretty much max. so work up to it. I get 3/4" to 1" groups with that load. The most accurate bullet I've used in my rifle is the 32 gr. Norma Varmageddon.
Bob
jam1e
New Member
Posts: 33
Joined: Thu Oct 25, 2012 9:03 am
.204 Ruger Guns: CZ American s/c
Location: Stratford On Avon, England.

Re: Best load with Hornady vmax 40 gns Please

Post by jam1e »

Cheers folks.
The imput is much appreciated :D
Post Reply