Trying Varget -UPDATE-

Share information about reloading the 204 Ruger.
brokeasajoke
Junior Member
Posts: 96
Joined: Thu Mar 16, 2006 10:20 pm
.204 Ruger Guns: Rem VSSF II .204 VX-III 8.5-25 side focus tgt dot
Location: Western N. Carolina
Contact:

Trying Varget -UPDATE-

Post by brokeasajoke »

Loaded up some rounds today with varget. Win brass, BR4 primers, 35gr bergers at sbout 2.260 coal. Loaded 27.2 up to 28.2 in .2 increments. Hopefully the weather will hold up so i can see if my VSSF likes any of them.
Last edited by brokeasajoke on Mon Jan 07, 2013 10:21 pm, edited 1 time in total.
User avatar
Clint E
Senior Member
Posts: 370
Joined: Sun Sep 20, 2009 3:10 pm
.204 Ruger Guns: none
Location: Wyoming

Re: Trying Varget

Post by Clint E »

I tryed varget in my 204 and could not get the speed out of it but did have cosistant groups with it do not remember charge weight. I was shooting 39sbk it will be interesting to see what 35s do.
Jim White
Moderator
Posts: 1406
Joined: Mon Nov 03, 2008 2:06 pm
.204 Ruger Guns: CZ-527, Remington 700 VLTHSS

Re: Trying Varget

Post by Jim White »

Varget shot so-so for me but the velocity wasn't there in comparision to other brands.
brokeasajoke
Junior Member
Posts: 96
Joined: Thu Mar 16, 2006 10:20 pm
.204 Ruger Guns: Rem VSSF II .204 VX-III 8.5-25 side focus tgt dot
Location: Western N. Carolina
Contact:

Re: Trying Varget

Post by brokeasajoke »

Only reason im trying it is for an optimum charge load. i need a cronograph bad. hint hint santa.
broper
Senior Member
Posts: 318
Joined: Tue Jan 06, 2009 4:12 pm
.204 Ruger Guns: Remington 700 sps
Location: Parma, Idaho

Re: Trying Varget

Post by broper »

I haven't used Varget but I've had real good luck with BLC(2) in my .204. I've got some ladder loads with 35 gr. Bergers that I need to go try. I loaded some 32gr. Nosler Varmageddons and they are super accurate in my rifle. I got a .169 group with 29 gr. BLC(2). If Varget doesn't work out for you, give BLC(2) a try. I'm very happy with it.
User avatar
RAMOS
Senior Member
Posts: 765
Joined: Sat Nov 21, 2009 9:30 am
.204 Ruger Guns: Savage Model 12 FLV, Cooper M21
Location: Sherman County, Oregon

Re: Trying Varget

Post by RAMOS »

I had very good accuracy w/Varget in two different 204R's. Went to RL10X and groups tightened up a smidge and picked up some speed. If you don't see the desired results on paper, try adjusting your charge by 1/10gr instead of 2/10gr. I would suggest playing w/ seating depth after you have settled on the charge. FWIW, I was using WW brass, Fed 205M primers, 32 V-Max and 39 SBK's.
User avatar
MG34
New Member
Posts: 6
Joined: Sat Jan 22, 2011 8:17 pm
.204 Ruger Guns: Remington 700 VS
Location: Lakeside Ca.

Re: Trying Varget

Post by MG34 »

I use Varget and IMR 4064 with Sierra bullets in my Remington 700 with excellent results.
Big Sandy Shooter K6MGX Remington 700 VS 6X24 Bushnell Elite
User avatar
DoubleUp
Senior Member
Posts: 146
Joined: Tue Dec 21, 2010 5:36 pm
.204 Ruger Guns: 204 Ruger

Re: Trying Varget

Post by DoubleUp »

As long as you don't have a chrono you'll probably be completely satisfied with Varget accuracy wise. Of course some rifles just don't seem to do well with some powders and that is always a crapshoot. I've shot some very good groups with Varget, but it is quite a bit slower than many other good powders for the 204. Other negatives are it bridges pretty badly in powder funnels and doesn't throw very accurately. If you weigh and trickle, the second part won't be much of a problem. I doubt any animal is going to know the difference because it gets hit with a 39 or 40 gr bullet travelling at 3,600-3,700 instead of 3,800-3,900. Same deal with 32, 34, 35, or 37 gr. Personally I like H4895 a little beter than Varget, and IMR 8208 a little better than H4895, but that's just me. I try to stay away from temp sensitive powders because I shoot all year long.
brokeasajoke
Junior Member
Posts: 96
Joined: Thu Mar 16, 2006 10:20 pm
.204 Ruger Guns: Rem VSSF II .204 VX-III 8.5-25 side focus tgt dot
Location: Western N. Carolina
Contact:

Re: Trying Varget

Post by brokeasajoke »

was using h4895. Im just messing around with varget. May try it in my 243 too. Ive got my sights set on h4895 blc2 or 8208 for my go to load. Im just getting back on the reloading scene and relearning. A friend of mine got out of it so i have about 10 different powders including about 10lbs of h322.
inKYfromSD
Senior Member
Posts: 158
Joined: Wed Aug 03, 2011 7:26 am
.204 Ruger Guns: CZ 527 varmint .204, Cooper Model 21 20 VarTarg

Re: Trying Varget

Post by inKYfromSD »

FWIW, my .243 loves 41.6 grains of Varget under 70 gr Nosler BTs. One ragged hole at 100 yds. Tons of fun in a dog town until the barrel gets too warm. Good luck with your search!
User avatar
DoubleUp
Senior Member
Posts: 146
Joined: Tue Dec 21, 2010 5:36 pm
.204 Ruger Guns: 204 Ruger

Re: Trying Varget

Post by DoubleUp »

H322 shoots mighty good too, and I generally like to keep a couple of lbs on hand myself.
User avatar
Silverfox
Senior Member
Posts: 937
Joined: Tue Feb 01, 2005 1:51 pm
.204 Ruger Guns: Savage 12VLP purchased in June 2004 + 2 other custom .204s
Location: NW North Dakota

Re: Trying Varget

Post by Silverfox »

I tried lots of powders with the 35 gr. FBHP Bergers, but wound up using H4895. My rifle is a Savage 12VLP and I used Hornady casings, Remington 7½ primers and a stiff load of H4895. This was the most accurate load for the 35 gr. Bergers and really punched the lights out on coyotes.
Catch ya L8R--Silverfox
HoundofSC
Junior Member
Posts: 82
Joined: Thu Jan 26, 2012 4:36 pm
.204 Ruger Guns: Stevens based custom

Re: Trying Varget

Post by HoundofSC »

I shoot a off the shelf 26 inch Criterion barrel on a savage action, varget was a so so powder for me in 32's, 34's and 39's. Not bad but my gun likes RL10X better in the 32's and 39's
smitty55
New Member
Posts: 42
Joined: Sat Dec 29, 2012 9:33 pm
.204 Ruger Guns: savage 25 walking varmint
Location: new york state

Re: Trying Varget

Post by smitty55 »

are the RL powders temp sensitive??? sounds like RL10 is a powder to try
HoundofSC
Junior Member
Posts: 82
Joined: Thu Jan 26, 2012 4:36 pm
.204 Ruger Guns: Stevens based custom

Re: Trying Varget

Post by HoundofSC »

yep, real sensitive to barrel temp also. If you shoot fast, like I tend to, don't push it too high. Find a low to midrange node
Post Reply