Deburring Flashholes?

Share information about reloading the 204 Ruger.
Predator1
Junior Member
Posts: 50
Joined: Mon Nov 21, 2011 7:03 pm
.204 Ruger Guns: CZ 527 Varmint

Deburring Flashholes?

Post by Predator1 »

What tool are you guys using? I have an old Lyman tool that works great on my bigger stuff but the shaft measures .215 and won't fit down into the mouth of the 204 and I haven't seen any listed from Midsouth etc.
Shamu25
New Member
Posts: 46
Joined: Tue Jan 25, 2011 2:50 pm
.204 Ruger Guns: CZ 527 Varmint in .204
Location: Grand Rapids Mi

Re: Deburring Flashholes?

Post by Shamu25 »

I ordered the KM Precision Shooting Products flash hole uniformer. They make it for .20 caliber and it works great. Very precise and you can feel it doing its job on new cartridge cases. I understand that once a case is done it's done for life. Happy shooting
User avatar
wirelessguy2005
Senior Member
Posts: 663
Joined: Wed Feb 24, 2010 6:59 pm
.204 Ruger Guns: Custom 20 SCC, Savage LRPV 20 Nitro , Howa 1500 204 Ruger
Location: Indiana

Re: Deburring Flashholes?

Post by wirelessguy2005 »

We manufacture a 20 caliber flash hole debur tool. Many of the members of this forum have purchased one so I am sure they will provide some feedback. Our tool is machined from Stainless steel and built to last a lifetime. Here is a link to the info on our website: http://www.customreloadingtools.com/crt_013.htm
User avatar
Hedge
Senior Member
Posts: 248
Joined: Mon Jan 17, 2011 11:52 pm
.204 Ruger Guns: Savage model 12 FLV
Location: S. Central ND

Re: Deburring Flashholes?

Post by Hedge »

Brad makes a great flash hole deburring tool. :yeah: Sharp and well designed. Indexes off the web instead of the mouth. That makes sure you get a uniform cut.
Savage 12 FCV .204 Ruger
Viper PST FFP 4-16x50

ImageImage
======
"A fear of weapons is a sign of retarded sexual and emotional maturity" Sigmund Freud.
User avatar
Malazan
Senior Member
Posts: 119
Joined: Thu Apr 15, 2010 6:07 pm
.204 Ruger Guns: Cooper .204
Location: CO

Re: Deburring Flashholes?

Post by Malazan »

I use the Sinclair tool
Image

Live Hard

"When the Government fears the People there is Liberty, When the People fear the Government, there is Tyranny." - Thomas Jefferson
User avatar
ryutzy
Senior Member
Posts: 563
Joined: Mon Aug 16, 2010 9:40 am
.204 Ruger Guns: Superior Arms Custom AR-15 Leopold VXIII 4.5-14X50
Location: Plain City, OH

Re: Deburring Flashholes?

Post by ryutzy »

I use Brad's (customreloadingtools) flashhole tool and I really like it. It's the best I have used and does a great job. I recommend you order one from him.
It's hard to detect good luck, It looks so much like something you've worked hard for and earned.
Stay humble, Stay teacheable
Bill K
Senior Member
Posts: 2324
Joined: Tue Jan 18, 2011 10:00 am
.204 Ruger Guns: also now, a Savage switch bull barrel in 204R. 23 inch SS
Location: Lake Forest, Ca.

Re: Deburring Flashholes?

Post by Bill K »

There are a couple out there, but Customreloadingtools.com (Brad) is a site regular and sponsor. Bill K
User avatar
Rick in Oregon
Moderator
Posts: 4942
Joined: Thu Dec 01, 2005 4:20 pm
.204 Ruger Guns: Sako 75V, Cooper MTV, Kimber 84M, Cust M700 11 Twist
Location: High Desert of Central Oregon
Contact:

Re: Deburring Flashholes?

Post by Rick in Oregon »

There are only two decent tools that register off the case web and NOT the case mouth, K&M and CRT......but we like Brad's stuff the best. :D You can't go wrong with any of CRT's tools and accessories....very good stuff.
Semper Fortis
Rick in Oregon
NRA Life/OHA/VHA/VVA

Oregon, East of the Cascades - Where Common Sense Still Prevails

Image
btlbrn
Junior Member
Posts: 94
Joined: Thu Feb 10, 2011 3:43 pm
.204 Ruger Guns: Remington XR-100
Location: S W desert USA

Re: Deburring Flashholes?

Post by btlbrn »

Bill K wrote:There are a couple out there, but Customreloadingtools.com (Brad) is a site regular and sponsor. Bill K
+1 Yea, what Bill K said!! Brad's stuff is great!! :D
shooting fishing camping did I mention shooting??
Steve
janesy
New Member
Posts: 37
Joined: Sun Feb 07, 2010 8:14 am
.204 Ruger Guns: 700 sps

Re: Deburring Flashholes?

Post by janesy »

I have just bought Brad's last month. Works great!!
Sth Oz Dan
Senior Member
Posts: 406
Joined: Fri Nov 04, 2011 9:52 pm
.204 Ruger Guns: Ruger M77 Hawkeye
Location: South Australia

Re: Deburring Flashholes?

Post by Sth Oz Dan »

Can't vouch for Brad's FHDeburrer - tried to get hold of one but the supplier never bothered calling back (Australia). However, found KM tool from another OZ supplier and found it very easy to use.
As others have said, zeroes on the web and not case mouth, so deburrs and uniforms!!
User avatar
wirelessguy2005
Senior Member
Posts: 663
Joined: Wed Feb 24, 2010 6:59 pm
.204 Ruger Guns: Custom 20 SCC, Savage LRPV 20 Nitro , Howa 1500 204 Ruger
Location: Indiana

Re: Deburring Flashholes?

Post by wirelessguy2005 »

I apologize for our Australian Distributor failing to return your call. We take our customer service very serious, I will make sure to discuss this with the distributor so that we don't have the same probably again.

Brad

Sth Oz Dan wrote:Can't vouch for Brad's FHDeburrer - tried to get hold of one but the supplier never bothered calling back (Australia). However, found KM tool from another OZ supplier and found it very easy to use.
As others have said, zeroes on the web and not case mouth, so deburrs and uniforms!!
Sth Oz Dan
Senior Member
Posts: 406
Joined: Fri Nov 04, 2011 9:52 pm
.204 Ruger Guns: Ruger M77 Hawkeye
Location: South Australia

Re: Deburring Flashholes?

Post by Sth Oz Dan »

No worries Brad.
Guess I could've got one direct from you.
I'm annoyed about not being able to get your projectiles :mad:
Stupid laws. Nothing dangerous about a bit of copper and lead without explosives near it.
User avatar
wirelessguy2005
Senior Member
Posts: 663
Joined: Wed Feb 24, 2010 6:59 pm
.204 Ruger Guns: Custom 20 SCC, Savage LRPV 20 Nitro , Howa 1500 204 Ruger
Location: Indiana

Re: Deburring Flashholes?

Post by wirelessguy2005 »

I completely understand your frustration about not being able to import the projectiles. I am not happy with the import laws either. Let me know if you decide to take me up on my offer for the flash hole debur tool. :)

Brad
merdit
New Member
Posts: 12
Joined: Sun Sep 02, 2007 2:02 pm
.204 Ruger Guns: Savage model 12 4x4

Re: Deburring Flashholes?

Post by merdit »

Brad, Can your. 17 debur tool be used on 20-22 cals?
Post Reply