trimming .204 brass**help**

Share information about reloading the 204 Ruger.
griffshrek
New Member
Posts: 12
Joined: Thu Jul 07, 2011 12:53 pm
.204 Ruger Guns: Rem model 7
Location: Sunny South Wales UK

trimming .204 brass**help**

Post by griffshrek »

Hello gents, what are you guys using to trim your .204 brass back to size. for my .243&.308 i am using one of the Lee hand trimmers but cant find one for the .204

regards....neil
User avatar
wirelessguy2005
Senior Member
Posts: 663
Joined: Wed Feb 24, 2010 6:59 pm
.204 Ruger Guns: Custom 20 SCC, Savage LRPV 20 Nitro , Howa 1500 204 Ruger
Location: Indiana

Re: trimming .204 brass**help**

Post by wirelessguy2005 »

i am currently using a Lyman Universal trimmer. Its a descent tool for the money and trims accurately as long as you make sure the adjustment set screws are snug.
Bill K
Senior Member
Posts: 2324
Joined: Tue Jan 18, 2011 10:00 am
.204 Ruger Guns: also now, a Savage switch bull barrel in 204R. 23 inch SS
Location: Lake Forest, Ca.

Re: trimming .204 brass**help**

Post by Bill K »

Using my old RCBS, hand turned trimmer. Just had to get a .20 cal pilot is all, to make it do the job, as it does on all my cases, from .20 to .375.. Have had this old trimmer since about 1960.. Bill K :D
User avatar
Hedge
Senior Member
Posts: 248
Joined: Mon Jan 17, 2011 11:52 pm
.204 Ruger Guns: Savage model 12 FLV
Location: S. Central ND

Re: trimming .204 brass**help**

Post by Hedge »

Ran in to the same problem you did. I like the Lee trimmer, so I found a Lee in a caliber that was close enough in diameter with a long enough shank and turned it down to fit the .204. Honed the pin down so I get case length of 2.840". Can't remember the caliber I used....sorry.
Savage 12 FCV .204 Ruger
Viper PST FFP 4-16x50

ImageImage
======
"A fear of weapons is a sign of retarded sexual and emotional maturity" Sigmund Freud.
User avatar
RAMOS
Senior Member
Posts: 765
Joined: Sat Nov 21, 2009 9:30 am
.204 Ruger Guns: Savage Model 12 FLV, Cooper M21
Location: Sherman County, Oregon

Re: trimming .204 brass**help**

Post by RAMOS »

L.E. Wilson trimmer in a Sinclair stand w/Sharkfin hold down. Was using the RCBS until about three years ago. I like the fact that the Wilson is "collet-free". This makes it easy to set the length with a pair of calipers, dead on.
Shamu25
New Member
Posts: 46
Joined: Tue Jan 25, 2011 2:50 pm
.204 Ruger Guns: CZ 527 Varmint in .204
Location: Grand Rapids Mi

Re: trimming .204 brass**help**

Post by Shamu25 »

I second the Wilson trimmer. Relatively inexpensive when compared to others and the case holder works great. I went through 50 cases in just a few minutes. Smooth and accurate.
phil in wyone
New Member
Posts: 7
Joined: Fri Oct 21, 2011 10:53 am
.204 Ruger Guns: remington 700 sps-varmint

Re: trimming .204 brass**help**

Post by phil in wyone »

Wow, im going to have to get a wilson trimmer, resonable price and a heck of alot faster than my redding trim die, and it sounds like its just as accurate.
Jim White
Moderator
Posts: 1406
Joined: Mon Nov 03, 2008 2:06 pm
.204 Ruger Guns: CZ-527, Remington 700 VLTHSS

Re: trimming .204 brass**help**

Post by Jim White »

I use a Dillon Case Trimmer for all of mine.
noneck180
New Member
Posts: 6
Joined: Thu Sep 02, 2010 3:36 pm
.204 Ruger Guns: Tikka Super Varmint..

Re: trimming .204 brass**help**

Post by noneck180 »

Pretty sure if you trim unsized, a 22cal pilot should work, a few thou difference between sized and not won't a big difference. A guy could expirement with the trim length then resize.
User avatar
bow shot
Senior Member
Posts: 778
Joined: Fri Jul 24, 2009 8:04 am
.204 Ruger Guns: Rock River Arms AR-15 Varminter
Location: Central NY: infested with liberal wack-jobs and their damage

Re: trimming .204 brass**help**

Post by bow shot »

I turned a .222 rem mag Lee pin (mandrel) down to work with the the .204... word of caution: You may run into trouble if the cutter's hole is ever so slightly too big, causing the case to sneak between the mandrel and the I.D. of hole of the cutter into which it is screwed. I had several cutters on hand, and onel happend to be ok on this.

There is at least one thread here, and also on thefiringline.com about doing this.

I prefer the Lee over all others (yes, I have a Wilson, CH4D, and Forster and use them all) but because of the cutter dimension (I.D. of the hole) they can't make it work for .20 unless they re-tool. I sure hope they do!!
User avatar
RAMOS
Senior Member
Posts: 765
Joined: Sat Nov 21, 2009 9:30 am
.204 Ruger Guns: Savage Model 12 FLV, Cooper M21
Location: Sherman County, Oregon

Re: trimming .204 brass**help**

Post by RAMOS »

Just to clarify: The Wilson trimmer does NOT use a pilot/mandrel. Therefore, the cutter does NOT have a hole in the center of the cutter face. The cutter flutes go small enough to trim 20 caliber cases, even though they do sell a 17/20 caliber replacement cutter.
griffshrek
New Member
Posts: 12
Joined: Thu Jul 07, 2011 12:53 pm
.204 Ruger Guns: Rem model 7
Location: Sunny South Wales UK

Re: trimming .204 brass**help**

Post by griffshrek »

thanks for all the replies gents , i was thinking of getting a .222rem mag and reducing down the diameter ...except the .222 rem mag mandrils are as rare as rocking horse s**t , might do the same with a 22-250 .

i will keep you all updated
User avatar
mmw1015
New Member
Posts: 31
Joined: Fri Mar 25, 2011 4:27 pm
.204 Ruger Guns: h&r ultra varmit w/ fluted barrel
Location: Katy, TEXAS

Re: trimming .204 brass**help**

Post by mmw1015 »

I had the same problem finding the center guide so I took the 22 cal center
that came with my lee trimmer and placed it in a drill and sanded it down to fit the 204. works great!
It was easy to do. Hope this helps.
Mack
Mack
User avatar
GaCop
Senior Member
Posts: 117
Joined: Tue Mar 24, 2009 12:53 pm
.204 Ruger Guns: AR-15, 24" stainless varmint barrel
Location: Warner Robins, Ga

Re: trimming .204 brass**help**

Post by GaCop »

I use a Forster that I've had since 1968. Works great with all the calibers I load.
User avatar
bow shot
Senior Member
Posts: 778
Joined: Fri Jul 24, 2009 8:04 am
.204 Ruger Guns: Rock River Arms AR-15 Varminter
Location: Central NY: infested with liberal wack-jobs and their damage

Re: trimming .204 brass**help**

Post by bow shot »

..I should say that though I prefer the Lee, the Wilson and Forster are very, very good. Your life will not change for the better or worse with any of 'em!!
Post Reply