Which dies - Lee, Hornady, or RCBS?

Share information about reloading the 204 Ruger.
tpcollins
Senior Member
Posts: 108
Joined: Mon Mar 21, 2011 6:05 pm
.204 Ruger Guns: Tikka T3 Lite

Which dies - Lee, Hornady, or RCBS?

Post by tpcollins »

When I got into reloading awhile, I went with the Lee Collet dies for .243. I liked them and picked up .40 S&W and .380 Auto as well. When I bought my Tikka T3 Lite, Cabelas only had the RCBS and Hornady in stock for .204 so I got the RCBS. The bullet seater was terrible to adjust so it's packed up and ready to go back. Cabelas doesn't list any Lee Collet dies for .204 so I ordered one online.

Was it me or are all RCBS bullet seaters like this one? The Lee seater is so easy to adjust and use, I thought RCBS would be way ahead of Lee but I'm not sure now. Just wondering what everyone uses? Thanks.
User avatar
ryutzy
Senior Member
Posts: 563
Joined: Mon Aug 16, 2010 9:40 am
.204 Ruger Guns: Superior Arms Custom AR-15 Leopold VXIII 4.5-14X50
Location: Plain City, OH

Re: Which dies - Lee, Hornady, or RCBS?

Post by ryutzy »

REDDING!!! but if you are going with Lee I do believe most people would agree with me in saying that Lee would be a better way to go than RCBS. I do have some Lee dies and I have no problems with them. I do not have much experience with RCBS though.
It's hard to detect good luck, It looks so much like something you've worked hard for and earned.
Stay humble, Stay teacheable
User avatar
Sidewinderwa
Senior Member
Posts: 648
Joined: Mon Dec 26, 2005 9:39 am
.204 Ruger Guns: Savages
Location: Washington state

Re: Which dies - Lee, Hornady, or RCBS?

Post by Sidewinderwa »

I have not bought RCBS dies in over 20 years. I buy Redding and Forster dies and have been very happy with them. I hear that the upper end Lee dies are good. I have one older set of regular Lee dies and was not impressed with the accuracy from them.
Image
Please, no Sidewinder today!
K22

Re: Which dies - Lee, Hornady, or RCBS?

Post by K22 »

I have not bought RCBS dies in over 20 years. I buy Redding and Forster dies and have been very happy with them.
That makes 2 of us.
User avatar
Vartarg
Senior Member
Posts: 376
Joined: Mon Apr 30, 2007 3:26 pm
.204 Ruger Guns: Ruger 77MkII Target, Remington LVSF
Location: Louisiana

Re: Which dies - Lee, Hornady, or RCBS?

Post by Vartarg »

IMO: Redding all the way!
PEACE-Through Superior Firepower
User avatar
Rick in Oregon
Moderator
Posts: 4942
Joined: Thu Dec 01, 2005 4:20 pm
.204 Ruger Guns: Sako 75V, Cooper MTV, Kimber 84M, Cust M700 11 Twist
Location: High Desert of Central Oregon
Contact:

Re: Which dies - Lee, Hornady, or RCBS?

Post by Rick in Oregon »

+ One more for Redding. Been down the other two roads...... Redding all the way! :!:
Semper Fortis
Rick in Oregon
NRA Life/OHA/VHA/VVA

Oregon, East of the Cascades - Where Common Sense Still Prevails

Image
User avatar
willyp19
Senior Member
Posts: 131
Joined: Tue Nov 29, 2005 4:12 pm
.204 Ruger Guns: REM 700 Custom Predator / Varmint, REM 700 VS
Location: Eastern Washington

Re: Which dies - Lee, Hornady, or RCBS?

Post by willyp19 »

Redding or Forster...Both great dies.
NESHOOTER
New Member
Posts: 48
Joined: Sun Apr 18, 2010 6:35 pm
.204 Ruger Guns: SAVAGE 12 VLP/DBM 26'' LAM-STK/FLTD SS BLL/

Re: Which dies - Lee, Hornady, or RCBS?

Post by NESHOOTER »

I am not overly pleased with my hornady's they leave a ring just below the tip per hornady said to send back in and they would polish out the seater. Me thinks I have never had issues with my RCBS dies just the Hornadys... .o2 worth.
Semper Fi
User avatar
Rick in Oregon
Moderator
Posts: 4942
Joined: Thu Dec 01, 2005 4:20 pm
.204 Ruger Guns: Sako 75V, Cooper MTV, Kimber 84M, Cust M700 11 Twist
Location: High Desert of Central Oregon
Contact:

Re: Which dies - Lee, Hornady, or RCBS?

Post by Rick in Oregon »

NE: You can "fix" that ring on your bullets by just chucking up your seater plug in a drill, and polish the opening with your finger tip in a rag with Flitz on it, or a piece of fine emery cloth....takes all of 30 seconds of drill time and completely eliminates the indent on your bullets.
Semper Fortis
Rick in Oregon
NRA Life/OHA/VHA/VVA

Oregon, East of the Cascades - Where Common Sense Still Prevails

Image
bigcatdaddy
New Member
Posts: 34
Joined: Sat Oct 02, 2010 8:38 am
.204 Ruger Guns: savage

Re: Which dies - Lee, Hornady, or RCBS?

Post by bigcatdaddy »

Agree with Redding.

Gotta say though, in my limited experience, those Lee collet dies are as good or superior to Reddings type S bushing neck sizers. And for far less $$.
restosteve
New Member
Posts: 3
Joined: Fri Mar 25, 2011 4:22 pm
.204 Ruger Guns: Savage

Re: Which dies - Lee, Hornady, or RCBS?

Post by restosteve »

I used RCBS when I first got into reloading, mostly because that's what everybody sold. For pistol cartridges they're ok, but to get accuracy in a rifle I use Redding all the way. Their comp. dies and bushing neck size dies are great. RCBS stuff is alot cheaper, but you get what you pay for.

Redding!
NESHOOTER
New Member
Posts: 48
Joined: Sun Apr 18, 2010 6:35 pm
.204 Ruger Guns: SAVAGE 12 VLP/DBM 26'' LAM-STK/FLTD SS BLL/

Re: Which dies - Lee, Hornady, or RCBS?

Post by NESHOOTER »

Thanks Rick, I have already got them polished by them, they didn't charge just took alittle time and I wanted them to check their quality control issues was the only reason I returned them to fix.
Semper Fi
User avatar
Varoum
New Member
Posts: 46
Joined: Fri Apr 01, 2011 3:54 pm
.204 Ruger Guns: none
Location: Montréal, Canada

Re: Which dies - Lee, Hornady, or RCBS?

Post by Varoum »

Forsters setting die with the option mentionned here http://www.forsterproducts.com/store.as ... atid=19938
steve
Senior Member
Posts: 186
Joined: Fri Nov 16, 2007 3:16 pm
.204 Ruger Guns: rem 204 lvsf
Location: temecula california

Re: Which dies - Lee, Hornady, or RCBS?

Post by steve »

Redding for sure.
tpcollins
Senior Member
Posts: 108
Joined: Mon Mar 21, 2011 6:05 pm
.204 Ruger Guns: Tikka T3 Lite

Re: Which dies - Lee, Hornady, or RCBS?

Post by tpcollins »

After reviewing my brother-in-law's RCBS die, the bullet seater adjustment was different on mine. His has a threaded rod with a screw driver slot in it and a hex stop nut - cumbersome looking but better than the screw inside another screw that was difficult to tighten while maintaining a specific height.

I return the RCBS to Cabelas and odered a Lee which is what I have for my other 3 sets of dies. The simple bullet adjustment screw with tension held by a simple O-ring is so much better to fine tune those last couple of thousands with. I'm happy now.
Post Reply