1-10 Twist

Share information about reloading the 204 Ruger.
spacewelder
New Member
Posts: 23
Joined: Mon Dec 28, 2009 9:52 am
.204 Ruger Guns: Lothar Walther AR-15, CZ American 204, Rem 700 204, ETC
Location: San Marcos California( Its a communist state)

1-10 Twist

Post by spacewelder »

OK guys I am new to this forum and I have just purchsed a 1-10 twist LW Barrel. I would like to know your guys preference for this twist rate. This is my third 204, but my first 1-10. I would love to hear what you have to say please. If this has been answered in another post please let me know.
Thanks
BabaOriley
Senior Member
Posts: 312
Joined: Sat Apr 05, 2008 12:21 am
.204 Ruger Guns: Dtech AR
Location: SE MN

Re: 1-10 Twist

Post by BabaOriley »

Welcome to the forum spacewelder. This topic has been discussed at length on this forum, and very much so recently, so I don't want to take the time today to go over it again. What I will do is try to save you some time in weeding through a search to get started. You can click the "search"' link in the upper right if you're signed in, and search the term "twist" to get quite a few results.

http://www.204ruger.com/forum/viewtopic ... ilit=twist

http://www.204ruger.com/forum/viewtopic ... ilit=twist

http://www.204ruger.com/forum/viewtopic ... ilit=twist

http://www.204ruger.com/forum/viewtopic ... ilit=twist

http://www.204ruger.com/forum/viewtopic ... ilit=twist

http://www.204ruger.com/forum/viewtopic ... ilit=twist
spacewelder
New Member
Posts: 23
Joined: Mon Dec 28, 2009 9:52 am
.204 Ruger Guns: Lothar Walther AR-15, CZ American 204, Rem 700 204, ETC
Location: San Marcos California( Its a communist state)

Re: 1-10 Twist

Post by spacewelder »

Mods please remove this.
Thanks guys
User avatar
Glen
Moderator
Posts: 1741
Joined: Sun Feb 06, 2005 9:22 pm
.204 Ruger Guns: Rem700ADL
Location: New Philadelphia, Ohio
Contact:

Re: 1-10 Twist

Post by Glen »

It's OK where it's at spacewelder. Old news on the front page around here is usually a good thing with new members constantly joining. :wink:
Friends Are Friends By Nature.

RIP Russ,Blaine, & Darrell!!

I don't like repeat offenders. I like DEAD offenders!!
Ted Nugent


Isn't there a minimum age for grampas??
^^^^^^
Audrey Renae told me "No there isn't"!!

Glen
kenbrofox
Senior Member
Posts: 363
Joined: Wed Oct 15, 2008 9:36 am
.204 Ruger Guns: remington vls 204
Location: lancashire UK

Re: 1-10 Twist

Post by kenbrofox »

Glen wrote:It's OK where it's at spacewelder. Old news on the front page around here is usually a good thing with new members constantly joining. :wink:
Heads up on that Glenn, i was one of the newbies that asked the question back then. Settled on 11 twist after advice and haven't regretted it. Boy, have i been taught some stuff since then. Great forum and good people. Thanks, Ken. :D
' Pay it forward buddy '
poppybull
New Member
Posts: 38
Joined: Tue Aug 04, 2009 3:26 pm
.204 Ruger Guns: none

Re: 1-10 Twist

Post by poppybull »

I personally like the info being consildated into one post. THANKS
CV32
Junior Member
Posts: 82
Joined: Sun Nov 27, 2005 8:17 am
Location: The Rock, Canada

Re: 1-10 Twist

Post by CV32 »

spacewelder, I had a 1 in 10 twist Pac-Nor Super Match barrel, with a match chamber, dropped into my Remington 700 VLS. I can tell you that it loves the 50 gr Berger over 25.0 gr H4895. I'm looking forward to shooting it a lot more this summer once I get a Jewell BR trigger installed.
The art of war is simple enough. Find out where your enemy is. Get at him as soon as you can. Strike him as hard as you can, and keep moving. - Ulysses S. Grant (1822-85)
User avatar
Rick in Oregon
Moderator
Posts: 4942
Joined: Thu Dec 01, 2005 4:20 pm
.204 Ruger Guns: Sako 75V, Cooper MTV, Kimber 84M, Cust M700 11 Twist
Location: High Desert of Central Oregon
Contact:

Re: 1-10 Twist

Post by Rick in Oregon »

CV32: Just out of curiosity, what velocities are you getting shooting the 50 grainers in your ten twist .204? I ask, as I use the 50gr .224" bullet at 3,700 fps in my 12 twist 223 Ackley for grass rats besides my three 204's and Swift. The BC is better with the heavy .204 bullet, but what's the velocity?

Inquiring minds you know......
Semper Fortis
Rick in Oregon
NRA Life/OHA/VHA/VVA

Oregon, East of the Cascades - Where Common Sense Still Prevails

Image
CV32
Junior Member
Posts: 82
Joined: Sun Nov 27, 2005 8:17 am
Location: The Rock, Canada

Re: 1-10 Twist

Post by CV32 »

Rick in Oregon wrote:CV32: Just out of curiosity, what velocities are you getting shooting the 50 grainers in your ten twist .204? I ask, as I use the 50gr .224" bullet at 3,700 fps in my 12 twist 223 Ackley for grass rats besides my three 204's and Swift. The BC is better with the heavy .204 bullet, but what's the velocity? Inquiring minds you know......
I haven't chronied that 50 gr Berger load yet. Definitely on the "to do" list. The first three shots out of that barrel with that load were all touching.

I did chrony a 40 gr Berger load (26.8 gr H4895) in the new barrel. Came in at 3,857 fps.
The art of war is simple enough. Find out where your enemy is. Get at him as soon as you can. Strike him as hard as you can, and keep moving. - Ulysses S. Grant (1822-85)
BabaOriley
Senior Member
Posts: 312
Joined: Sat Apr 05, 2008 12:21 am
.204 Ruger Guns: Dtech AR
Location: SE MN

Re: 1-10 Twist

Post by BabaOriley »

The most accurate charge I found using the 50 grain Berger with Ramshot TAC in my 1:10 yielded 3300fps. I probably could have hit 3450 and had everything hold together. This is in a 23" AR-15 platform, which robs ~150fps using gases to run the semi-auto action. I could see a bolt action in .204 using something like BL-C(2) or Alliant Reloader-10x pushing velocities to 3600+. Maybe faster with a 26"+ barrel?
spacewelder
New Member
Posts: 23
Joined: Mon Dec 28, 2009 9:52 am
.204 Ruger Guns: Lothar Walther AR-15, CZ American 204, Rem 700 204, ETC
Location: San Marcos California( Its a communist state)

Re: 1-10 Twist

Post by spacewelder »

Thanks guys,
This will def. help me out! I just ordered some 50 bergs and will let everyone know how it does.
Thanks Again for all the help!
Post Reply