Scope mount for my AR(s)

bow shot · Post by **bow shot** » Wed Oct 05, 2011 2:59 pm

What are 'yall using on your ARs?

I have a YHM riser holding up Warne rings on one upper, and High Weaver tacticals rings mounted directly on another upper.

I like the idea of the one-piece mount...

Yes, I know I'll have to re-zero if I move a dedicated scope/mount pair, if I rotate it between uppers, but is anyone doing that and fairly happy with the mount?

I'm looing at the Burris PEPR and RRA mounts... and deep down inside hope there is something cheaper that isn't ...well... cheaper. I guess I should know better, lol!

Rick in Oregon · Post by **Rick in Oregon** » Wed Oct 05, 2011 3:03 pm

bow shot: I see you posting alot of AR stuff here, and wonder if you'd get more responses from like-minded AR shooters over at AR15.com. Just a thought, as most here are bolt gun shooters. Good luck.

http://www.ar15.com/forums/b/3_AR_15.html

kyyotestalker · Post by **kyyotestalker** » Wed Oct 05, 2011 8:39 pm

There are 2 main styles of flat top ar mounts and you have to decide if you want a quick detach (my personal choice) or a fixed mount! if you want a quick detach look for an american defence mounts on midwayusa.com they are nicely priced (125-200 dollars depending on model) and very well made or a burris ar pepr qd for $99, if you want a fixed look for a nikon m223 mount or a burris ar pepr 1 piece mount both are about $100! my personal choice is an American Defense Scout Quick-Release Extended Picatinny-Style with 1" Rings it works perfictally on my colt hbarII with an a2 butt stock and can be taken on and off with out a loss of zero but it runs $150

bow shot · Post by **bow shot** » Thu Oct 06, 2011 6:46 am

Ok, thanks for the intel folks.

I've been cruising on ar15.com and sniper's hide, and is seems that If I don't want to hate life, I'll need to just spend the $ on a something like 'stalker mentioned. I see furhntr has an armalite mount on the swapmeet here, but its for 30mm tube.

'Time to sell something less important like our food or lawnmower or something...

Lead Lobber · Post by **Lead Lobber** » Thu Oct 06, 2011 2:40 pm

I have a M223 Nikon mount and like it alot....plus it is made in the US unlike the Burris Stuff. I lapped it with a lapping bar and I didn't have to take out much material to get a "true" mating surface. I have a Leupold 6-18x40 mounted on it now.

I bet I looked for a month for good mount. Since this rifle is set up for distance, I was never going to remove the mount. The quick latch systems are convenient but there is no way it can keep a true 0 at 200+ yards. That is my opinion.....the quick mounts are great for a red dot scope or anything close range, but a long range gun????No way, at least not for me.

kyyotestalker · Post by **kyyotestalker** » Thu Oct 06, 2011 3:33 pm

Lead Lobber wrote:The quick latch systems are convenient but there is no way it can keep a true 0 at 200+ yards. That is my opinion.....the quick mounts are great for a red dot scope or anything close range, but a long range gun????No way, at least not for me.

i have to differ here on this one with a quality made and installed mount on a proper spec rail a quick latch system can be very accurate! My adm quick detach mount on my accurized colt ar shoots .25 moa at 100 and stays sub moa out to 600 I can removed the mount and lock and unlock the locking lever several times with it off the rifle then remount the optic and have no change in zero!

bow shot · Post by **bow shot** » Thu Oct 06, 2011 4:44 pm

I may just keep it attached to the YHM iser and move ther riser over and back. 'Mainly want to avoid the hazards/hassels of moving it in/out of rings, or moving it in the rings.

204Shooter · Post by **204Shooter** » Fri Oct 07, 2011 9:45 am

Burris PEPR is a good product. I mostly use their xtreme tactical rings. They are a high quality product and work very well.

bow shot · Post by **bow shot** » Tue Oct 11, 2011 9:41 am

Very close to going with the PEPR.. or RRA

Lead Lobber · Post by **Lead Lobber** » Tue Oct 11, 2011 1:36 pm

ADM makes a great product, as does RRA........

As far as a detatch system, I just have the fear of getting a hair or grain of sand under the lip of the rail or something. .005" on the rail will make a huge difference at 500 yards.

bow shot · Post by **bow shot** » Fri Oct 14, 2011 1:21 pm

Yeah, I figure I'll have to sight in each time I move it.. But I'm outa optics cash for now

...

Lead Lobber · Post by **Lead Lobber** » Sat Oct 15, 2011 7:44 pm

If you want something cheap, I have a rail and rings for sale. $30 plus $5 shipping. I don't know the make but it came on my AR when I bought it.

I can send you a picture if you are interested.

bow shot · Post by **bow shot** » Tue Oct 18, 2011 9:02 am

Thanks 'Lobber, but I'm gonna hold out for now. I'll just wait till I have the $ and likely go with the Burris mount,

Trent · Post by **Trent** » Wed Oct 19, 2011 10:57 pm

I picked up the PEPR (non-QD) today for my new AR. Pretty nice mount. Was a little sad to see it is made in China instead of here in the US. Burris is up the road from me here in Colorado. Wasn't aware, or at least I didn't remember, it isn't made in the US. Still, I am happy with the mount for $79.

inKYfromSD · Post by **inKYfromSD** » Fri Oct 21, 2011 8:24 am

I've been very happy with the RRA mounts on both of my AR's. Very solid and took Cerakote well.

SmallCaliberCentral

Scope mount for my AR(s)

Scope mount for my AR(s)

Re: Scope mount for my AR(s)

Re: Scope mount for my AR(s)

Re: Scope mount for my AR(s)

Re: Scope mount for my AR(s)

Re: Scope mount for my AR(s)

Re: Scope mount for my AR(s)

Re: Scope mount for my AR(s)

Re: Scope mount for my AR(s)

Re: Scope mount for my AR(s)

Re: Scope mount for my AR(s)

Re: Scope mount for my AR(s)

Re: Scope mount for my AR(s)

Re: Scope mount for my AR(s)

Re: Scope mount for my AR(s)