Jard trigger for Cooper 204

General discussion and information about the 204 Ruger.
triggerfingers
Senior Member
Posts: 119
Joined: Wed May 10, 2017 8:39 am
.204 Ruger Guns: Cooper MTV 204 Ruger, Savage 12 LRPV 20 VT, Cooper MTV 6x45

Jard trigger for Cooper 204

Post by triggerfingers »

I have read on the forum where some members have installed a Jard trigger on their Cooper rifle. I was thinking of a 8 or 10 oz trigger, but was curious if anyone has had issues with the Jard trigger unit. How have they worked for you over time.

Thanks
User avatar
Rick in Oregon
Moderator
Posts: 4942
Joined: Thu Dec 01, 2005 4:20 pm
.204 Ruger Guns: Sako 75V, Cooper MTV, Kimber 84M, Cust M700 11 Twist
Location: High Desert of Central Oregon
Contact:

Re: Jard trigger for Cooper 204

Post by Rick in Oregon »

Well, seeing as Jewell no longer produces adjustable trigger assemblies for Cooper rifles, Jard is the only game in town. I have their 10oz triggers in four of my Cooper varmint rifles and could not be happier. The oldest one is now about six years old, still working perfectly....breaks like the proverbial glass rod with no creep or overtravel.

Three of the four Jard-equipped Coopers (20 VT, 223R, 204R):

Image

Easy to install, and when done, you've got a trigger to love that should have been installed at the factory. :D
Semper Fortis
Rick in Oregon
NRA Life/OHA/VHA/VVA

Oregon, East of the Cascades - Where Common Sense Still Prevails

Image
triggerfingers
Senior Member
Posts: 119
Joined: Wed May 10, 2017 8:39 am
.204 Ruger Guns: Cooper MTV 204 Ruger, Savage 12 LRPV 20 VT, Cooper MTV 6x45

Re: Jard trigger for Cooper 204

Post by triggerfingers »

Than you Rick.....I totally agree with you on a better factory trigger.
User avatar
blkdog
New Member
Posts: 36
Joined: Sat Feb 24, 2007 11:36 am
Location: Caldwell,ID

Re: Jard trigger for Cooper 204

Post by blkdog »

I am using one in one of my Coopers and I am going to replace the others as well really good stuff and simple to install.
User avatar
terrace
Senior Member
Posts: 119
Joined: Mon Nov 08, 2010 8:26 pm
.204 Ruger Guns: MK II TARGET SS LAMINATE,COOPER PHOENIX
Location: central coast of California

Re: Jard trigger for Cooper 204

Post by terrace »

I found a 8oz jard in a drawer that I purchased in 2013 I've replaced several Remington but am a little apprehensive about doing a cooper. Anything to look out for
User avatar
Rick in Oregon
Moderator
Posts: 4942
Joined: Thu Dec 01, 2005 4:20 pm
.204 Ruger Guns: Sako 75V, Cooper MTV, Kimber 84M, Cust M700 11 Twist
Location: High Desert of Central Oregon
Contact:

Re: Jard trigger for Cooper 204

Post by Rick in Oregon »

It's pretty forthright.....all four of my Jard's went right into my Coopers without any fuss.

Should not really be an issue. Proceed with confidence! :wink:
Semper Fortis
Rick in Oregon
NRA Life/OHA/VHA/VVA

Oregon, East of the Cascades - Where Common Sense Still Prevails

Image
User avatar
terrace
Senior Member
Posts: 119
Joined: Mon Nov 08, 2010 8:26 pm
.204 Ruger Guns: MK II TARGET SS LAMINATE,COOPER PHOENIX
Location: central coast of California

Re: Jard trigger for Cooper 204

Post by terrace »

Thanks rick I'll give it a go
Post Reply