Your favourite bore cleaner

General discussion and information about the 204 Ruger.
Motoshooter
New Member
Posts: 28
Joined: Sat Apr 20, 2013 9:20 am
.204 Ruger Guns: Tikka

Your favourite bore cleaner

Post by Motoshooter »

Ive found I need to upgrade my cleaning methods since getting the 204. Just putting Hoppes#9 does not seem quite good enough. I guess these fast bullets and fast burning powders (Im using VV530 powder (nitroglycerol)) - makes cleaning more critical.

Ok, enough bull, what are the best barrel cleaners out there and how do U use them?
Bert
New Member
Posts: 31
Joined: Sun Nov 22, 2009 3:52 pm
.204 Ruger Guns: Howa 1500

Re: Your favourite bore cleaner

Post by Bert »

Try the MPRO-7 products, especially the copper remover.
User avatar
Bodei
Senior Member
Posts: 442
Joined: Tue Jan 31, 2012 9:23 pm
.204 Ruger Guns: Howa Mod 1500 24" BBL .204R; Cooper M21 20 VT; CZ 527 17HH
Location: Reno, NV
Contact:

Re: Your favourite bore cleaner

Post by Bodei »

Wipe Out foam. Spray, let sit...wipes out copper, lead, powder. Doesnt stink up the joint. Good stuff.
Image
K = ½mv2
TwentyBore
Junior Member
Posts: 77
Joined: Sat Jun 22, 2013 1:34 pm
.204 Ruger Guns: Savage 12FV

Re: Your favourite bore cleaner

Post by TwentyBore »

Bodei wrote:Wipe Out foam. Spray, let sit...wipes out copper, lead, powder. Doesnt stink up the joint. Good stuff.
I like that stuff, too. My Savage seems to have an awfully rough bore, it fouls like CRAZY, and takes a TON to get it all out. So, I'm happy to do the Wipe-Out, letting it sit for a few hours each time.
Bill K
Senior Member
Posts: 2324
Joined: Tue Jan 18, 2011 10:00 am
.204 Ruger Guns: also now, a Savage switch bull barrel in 204R. 23 inch SS
Location: Lake Forest, Ca.

Re: Your favourite bore cleaner

Post by Bill K »

Wipe and patch out are both very good. Easy to use and do the job. Bill K :)
User avatar
boomer68
New Member
Posts: 18
Joined: Sun May 02, 2010 11:22 am
.204 Ruger Guns: Remington 700 VSSF
Location: Alberta, Canada

Post by boomer68 »

Bore Tech Eliminator is another good one.

Sent from my Nexus 5 using Tapatalk
Motoshooter
New Member
Posts: 28
Joined: Sat Apr 20, 2013 9:20 am
.204 Ruger Guns: Tikka

Re: Your favourite bore cleaner

Post by Motoshooter »

Do you use the wipe-out foam only or blend in other solvents before/after?
User avatar
ClaimJumper
Senior Member
Posts: 117
Joined: Thu Nov 17, 2011 12:31 am
.204 Ruger Guns: 3 custom .204's,22-250ai, 5-223, 6br Norma, Savage builds
Location: Sunriver, Oregon

Re: Your favourite bore cleaner

Post by ClaimJumper »

Smith and Wesson makes a "Gel" bore cleaner. Nylon brushed into the bore 20 strokes and leave it in overnight. No waste like the spray foams and not as messy. Next day one-two patches in oil the bore is clean.

http://autoorder.net/product/Smith-Wess ... e-Gel.html
Image

Retired Timber faller
Jim White
Moderator
Posts: 1406
Joined: Mon Nov 03, 2008 2:06 pm
.204 Ruger Guns: CZ-527, Remington 700 VLTHSS

Re: Your favourite bore cleaner

Post by Jim White »

Motoshooter wrote:Do you use the wipe-out foam only or blend in other solvents before/after?
Check their web page but IIRC; "don't use with any other cleaners.

FWIW, I like a mixtue of Shooters Choice (60%) and Kroil (40%).

HTH,
ghilledup
New Member
Posts: 2
Joined: Sat Apr 05, 2014 11:55 am
.204 Ruger Guns: Thompson Centre Venture

Re: Your favourite bore cleaner

Post by ghilledup »

The Shooters Choice MC#7 has been working pretty good for me, it works fast and isn't too expensive. Its an all around bore cleaner & does a pretty decent job of getting rid of copper fouling too...although my 204 T/C Venture normally has little to no fouling when shooting the Nosler BT's...just switched to sierras so we'll see if they are similar
TwentyBore
Junior Member
Posts: 77
Joined: Sat Jun 22, 2013 1:34 pm
.204 Ruger Guns: Savage 12FV

Re: Your favourite bore cleaner

Post by TwentyBore »

Motoshooter wrote:Do you use the wipe-out foam only or blend in other solvents before/after?
Just the wipe-out.
ak11b10
New Member
Posts: 5
Joined: Sat Apr 05, 2014 2:24 pm
.204 Ruger Guns: tc contender g1 custom 23" .204 ruger
Location: YK Delta, Alaska

Re: Your favourite bore cleaner

Post by ak11b10 »

hopps copper solvent wasn't getting my first 204 barrel clean. then i switched to gunslick pro foam bore cleaner. stuff works for me. it sprays like shaving cream then later it turns into heavy liquid. just have it sit in the barrel a while. i personally think the longer the better.
jcinnb
New Member
Posts: 15
Joined: Sat Mar 15, 2014 8:53 am
.204 Ruger Guns: CZ 527 Varmint

Re: Your favourite bore cleaner

Post by jcinnb »

I am only Three weeks in to .204s.

Are using small patches or do you cut regular ones down?

Any specialty ones out there?
Jim White
Moderator
Posts: 1406
Joined: Mon Nov 03, 2008 2:06 pm
.204 Ruger Guns: CZ-527, Remington 700 VLTHSS

Re: Your favourite bore cleaner

Post by Jim White »

Pro-Shot 1 1/8 x 1 1/8 (square or round) with a Pro-Shot jag works great. Not just any 1 1/8 x 1 1/8 patch works though even if with a Pro-Shot jag.

HTH.
TwentyBore
Junior Member
Posts: 77
Joined: Sat Jun 22, 2013 1:34 pm
.204 Ruger Guns: Savage 12FV

Re: Your favourite bore cleaner

Post by TwentyBore »

jcinnb wrote:I am only Three weeks in to .204s.

Are using small patches or do you cut regular ones down?

Any specialty ones out there?
I bought a big pack of Montana X-treme's 3/4" patches, for .17/.20 applications.
Post Reply