Page 1 of 2
Factory 20VT chambering
Posted: Sat Nov 03, 2012 8:39 am
by Bill K
Do any of you know or believe that one or more of the gun makers, other than Cooper, will ever offer a chambering in the 20VT. I think they are really missing the boat on doing so.
![Very Happy :D](./images/smilies/icon_biggrin.gif)
I.E. CZ, Ruger for starters. Bill K
Re: Factory 20VT chambering
Posted: Sat Nov 03, 2012 9:27 am
by Rick in Oregon
Bill: Until the 20VT gets SAAMI and CIP approval, you'll not see it offered as a factory offering from the major makers. Just take into account all the hassles of getting the 17HH approved.....it took over three years for the SAAMI approval. CZ won't chamber anything that's not CIP approved also, and that's even harder to achieve.
Bottom Line: Don't hold your breath. Thanks to firms like Cooper and Cascade Arms, we at least have it as a "semi-custom" offering.
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Re: Factory 20VT chambering
Posted: Sat Nov 03, 2012 10:07 am
by Bill K
I know you are right, Rick. But as I say, even if wheels turn very slow many times, the major's are missing the boat. In time, I know. Bill K
Re: Factory 20VT chambering
Posted: Sun Nov 04, 2012 2:34 am
by Bodei
I wonder exactly how many 20vt have been sold each year by Cooper since it was introduced? I bet the last 2 years have really skyrocketed.
Re: Factory 20VT chambering
Posted: Sun Nov 04, 2012 9:35 am
by Rick in Oregon
Considering that Remington now has the 17 and 221 Fireballs (22 cal), it would make perfect sense for them to label their next one as the "20 Fireball" and have
three calibers based on one case....but as they do not make ANY .20 caliber bullets at this time, one can only wonder what driving forces at R-P are at work to determine market share for such a venture.
It would require a huge imvestment in terms of tooling and production setup, but hey, imagine a factory loaded 20VT right now. If R-P does not do this, they are once again missing the proverbial boat. Time will tell, right?
![chin :chin:](./images/smilies/chin.gif)
Re: Factory 20VT chambering
Posted: Sun Nov 04, 2012 9:44 am
by Bill K
Rick, Remington does have the Accutip in .20 cal. only that one, as far as I know, but it sure would stand to reason to chamber a 20FB and load it with that bullet for a start. Would be a good starter for them, I really believe. Maybe if they recieved many emails asking about a 20 FB they would get on the ball. Bill K
Re: Factory 20VT chambering
Posted: Sun Nov 04, 2012 10:43 am
by Rick in Oregon
Bill: Right you are, but that Accu-Tip is made for them by Hornady. Remington themselves do not make their own .20 bullets.......dangit!
Re: Factory 20VT chambering
Posted: Sun Nov 04, 2012 2:13 pm
by Bill K
Darn... Here I thought maybe that would give them a push to chamber the 20VT.. Still think I will send Corp/Rem a email saying they are missing the boat, by not coming out with a 20FB alongwith their two other FB's.. Can not hurt anyway.. Bill K
Factory 20VT chambering
Posted: Sun Nov 04, 2012 2:24 pm
by TC Encore204
Remington recently dropped the 17 fireball, and are doing nothing to support the ones they already sold with ammo or brass. Seems that they aren't doing much to support the 221 or 17 rem either. I doubt they'd be anxious to legitimize a new cartridge that is so similar to one they just dropped, or other ones they aren't supporting very well either. JMO
Re: Factory 20VT chambering
Posted: Sun Nov 04, 2012 2:45 pm
by Bill K
Well there loss will be someone else's gain, down the road. I would just like to see a few other options, other than Cooper and/or rebarreling, from a factory chambered 20VT, alongwith maybe some 20 Tac's, etc. BIll K
Factory 20VT chambering
Posted: Sun Nov 04, 2012 9:25 pm
by TC Encore204
I agree with you, but as we know magnums sell. Magnummania takes away from other cartridges that may be deserving of being legitimized I think.
Re: Factory 20VT chambering
Posted: Mon Nov 05, 2012 6:48 am
by inKYfromSD
TC Encore204 wrote:Remington recently dropped the 17 fireball, and are doing nothing to support the ones they already sold with ammo or brass. Seems that they aren't doing much to support the 221 or 17 rem either. I doubt they'd be anxious to legitimize a new cartridge that is so similar to one they just dropped, or other ones they aren't supporting very well either. JMO
I was in the market for a .30 cal rifle two years ago. A Remington rep. was talking to me about their new 30 RAR. He promised me that Remington was fully behind the new proprietary round and that brass would be available soon. I didn't have an AR so I bought the 30 RAR. Fast forward 2 years - ammunition is virtually non-existent and brass is not available. There is no "parent" cartridge so you can't form brass from anything else. Fool me once...
Remington dropping the 17 FB doesn't surprise me. I bought 200 pieces of 221 FB brass for my new 20 VT but I'm going with formed brass from here on out. I'm not going to give them the chance to fool me twice.
Re: Factory 20VT chambering
Posted: Mon Nov 05, 2012 7:32 am
by Bill K
inKYfromSD.. If you want to add some super brass for your 20VT, contact Adam Bentley (posts here all the time) and try his LC formed brass. Super great of forming and ready to go brass. Decent price also, for the work involved. Bill K No I do not work for him, but I sure will plug his brass.. SMILE.
Re: Factory 20VT chambering
Posted: Tue Nov 06, 2012 12:32 am
by Bodei
The good thing about fireball based cartridges is that 221 FB has stood the test of time.
Re: Factory 20VT chambering
Posted: Tue Nov 06, 2012 10:03 am
by 204cat
"20 fireball" like the sound of that. wonder what the ballistics would be like ? better or less than the 20 vt ?