Remington 700 SPS Varmint 26" experiences

General discussion and information about the 204 Ruger.
mpstan
New Member
Posts: 31
Joined: Mon Nov 02, 2009 10:45 pm
.204 Ruger Guns: None yet

Remington 700 SPS Varmint 26" experiences

Post by mpstan »

I have an opportunity to pick up one of these new at a very good price. Would you mind telling me about yours? Of course I'm wondering about accuracy, as well as how picky it is with different loads, factory loads etc.

Thank you
broper
Senior Member
Posts: 318
Joined: Tue Jan 06, 2009 4:12 pm
.204 Ruger Guns: Remington 700 sps
Location: Parma, Idaho

Re: Remington 700 SPS Varmint 26" experiences

Post by broper »

Can't tell you about the SPS but, I have a VLS with 26" barrel and I love it. It is super accurate. I think you'd be happy with it, I'd say, go for it!
Volstandigkeit
New Member
Posts: 30
Joined: Thu Sep 13, 2012 10:47 am
.204 Ruger Guns: Remington 700 SPS Varmint

Re: Remington 700 SPS Varmint 26" experiences

Post by Volstandigkeit »

My 204 with the oversized 206 barrel should shoot the hair off a gnat's but once I get my 204 barrel on it.
User avatar
Tokimini
Senior Member
Posts: 428
Joined: Wed Dec 08, 2010 8:21 am
.204 Ruger Guns: Remington 700 SPS with a Shilen barrel
Location: Victor, NY

Re: Remington 700 SPS Varmint 26" experiences

Post by Tokimini »

My 700 SPS used to shoot sub quarter inch 5 shot groups using hand loads and just over half inch for factory loads. This year my groups have gotten a bit inconsistant. Time for a new barrel I'm afraid.
Bill K
Senior Member
Posts: 2324
Joined: Tue Jan 18, 2011 10:00 am
.204 Ruger Guns: also now, a Savage switch bull barrel in 204R. 23 inch SS
Location: Lake Forest, Ca.

Re: Remington 700 SPS Varmint 26" experiences

Post by Bill K »

I would imagine you have given the barrel and really, really good cleaning first and rechecked the groups, right ? Bill K
User avatar
terrace
Senior Member
Posts: 119
Joined: Mon Nov 08, 2010 8:26 pm
.204 Ruger Guns: MK II TARGET SS LAMINATE,COOPER PHOENIX
Location: central coast of California

Re: Remington 700 SPS Varmint 26" experiences

Post by terrace »

Have one in .257 weatherby shoots 3 shot cloverleafs
hemiallen
Senior Member
Posts: 190
Joined: Sat Oct 31, 2009 3:59 pm
.204 Ruger Guns: Rem 204r, 20vt one Sako-one Cooper, 17FB 17HH, 17JAVALENA

Re: Remington 700 SPS Varmint 26" experiences

Post by hemiallen »

Tokimini wrote:My 700 SPS used to shoot sub quarter inch 5 shot groups using hand loads and just over half inch for factory loads. This year my groups have gotten a bit inconsistent. Time for a new barrel I'm afraid.

Don't toss the barrel with the bath water yet. How many rounds does it have pushed down it, and I would suspect, in this order:


Barrel fouling

Bedding has changed, if you have removed the action before she started misbehaving, especially, or have humidity / storage issues

Muzzle

I would get some foaming Foul- out, let it soak a good day, and look for blue.


I think, unless you fired it really hot, a factory barrel, especially one that shoots that well, should last 2000 rounds or so before accuracy starts SLOWLY decreasing, it shouldn't just go from 1/4" to 1/2" due to a worn/ shot out barrel.

I get to head your way mid December, please hold off on snow until next spring when I come back. for Quarter 2, 3 and 4..lol

Good luck


Allen
RowdyYates
Senior Member
Posts: 266
Joined: Sat Jan 02, 2010 4:51 pm
.204 Ruger Guns: Remington LVSF, Cooper M21V, C-Z 527 Kevlar V

Re: Remington 700 SPS Varmint 26" experiences

Post by RowdyYates »

I have one in .22-250; one of those Cabela's special stainless models (now discontinued?) with a barrel that makes it probably at least a pound heavier than the blued ones; adding a B&C stock probably added even a little more weight. Mine had one of those first X-Pro triggers that was swapped for a Timney in short order, and also now one of those magazine extenders that adds a couple more rounds capacity without going to the expensive detachable mag kits. I bought is as a backup rifle for my .204s and maybe a longer-range coyote rifle, so as of now I haven't even bought dies. It shoots surprisingly well with almost any factory ammo tried: the best (3-shot) "group" so far was 5/8" with 55 gr. Federal Nosler B-tips; I have some Superformance and Black Hills 50 V-Maxes that I'll bet will get close to that, too. There's a ton of aftermarket stuff for the iconic 700, but knowing when to stop before getting into, say, Cooper prices is the question.
Haven't heard too much negative on the Varmint SPS's; seems like Rem. is still doing this one right.
204cat
Senior Member
Posts: 206
Joined: Wed Apr 22, 2009 2:33 pm
.204 Ruger Guns: rem 700 sps in 204ruger

Re: Remington 700 SPS Varmint 26" experiences

Post by 204cat »

doh how do you delete a double post ?
Last edited by 204cat on Thu Oct 25, 2012 7:18 am, edited 1 time in total.
204cat
Senior Member
Posts: 206
Joined: Wed Apr 22, 2009 2:33 pm
.204 Ruger Guns: rem 700 sps in 204ruger

Re: Remington 700 SPS Varmint 26" experiences

Post by 204cat »

Image

first shot out of the barrel after having been sitting all winter.

32 grain vmax
24 grains rl 10x warning under charge
69 f temp
29.4 bar
0.0 wind
**.** **.** location gps
cold bore shot
200 yards zero
244 yards to target
br4 primer
case has been reloaded 4 times
winchester brass
rem 700 sps varmint purchased 2002 26" bull
1 in 12 twist

edit crt has some great cleaner.
mpstan
New Member
Posts: 31
Joined: Mon Nov 02, 2009 10:45 pm
.204 Ruger Guns: None yet

Re: Remington 700 SPS Varmint 26" experiences

Post by mpstan »

Is your 26" Bull barrel the original factory? Do you expect 1/2" groups? Thank you for the post
204cat
Senior Member
Posts: 206
Joined: Wed Apr 22, 2009 2:33 pm
.204 Ruger Guns: rem 700 sps in 204ruger

Re: Remington 700 SPS Varmint 26" experiences

Post by 204cat »

best i have done .14 and worst .69 with the average being between .2 and .35 . have only had one box of factory loads. everything else has ben hand loads. i keep a detailed record of every single shot.

factory trigger still with the 4lbs pull. same factory barrel. the only prob was and is with the clip. loading her through the bottom the cases get really scratched up. so i only load her one shot at a time through the top and use her like a single shot. also no clip just drop in the cases and close the panel.
mpstan
New Member
Posts: 31
Joined: Mon Nov 02, 2009 10:45 pm
.204 Ruger Guns: None yet

Re: Remington 700 SPS Varmint 26" experiences

Post by mpstan »

After much deliberation on whether this is the right rifle for me, just before my head was about to explode, I completed an order. I looked at some laminated thumbholes and triggers but my smith wants to see how it shoots before messing with it. I'm undecided on how long I want to keep it as a 204...... I'd prefer a 20VT so if the barrel is accurate I would like to rechamber. This will be a paper puncher and PD gun.

Accessories:
A friend who is into bench rest got me started with reloading a 6.5x55 with Boretech cleaning rod (vs Dewey), RCBS match FL die with bushings, match grade seater; will post another thread asking about these items but if you care to contribute.....

Thank you and wish me luck that I get a good copy.....
janesy
New Member
Posts: 37
Joined: Sun Feb 07, 2010 8:14 am
.204 Ruger Guns: 700 sps

Re: Remington 700 SPS Varmint 26" experiences

Post by janesy »

My 26" 700 with a heavy barrel really likes 39Gr BK's. I cut it to 23" and I like it much much more. I find its easier to carry and its balanced better.

It shoots better than I do nw that I have it's load figured out. Following are at 100yd, 3 shots.

Image

Image
Post Reply