Lock-Ease for rifle barrels. Information please?

General discussion and information about the 204 Ruger.
User avatar
TEXAS222
Senior Member
Posts: 291
Joined: Sun Oct 19, 2014 8:09 pm
.204 Ruger Guns: custom build AR 15-Rem 700 .204 VARMINT- .204 Kimber Pro Var
Location: Southeast Texas

Lock-Ease for rifle barrels. Information please?

Post by TEXAS222 »

Hello all. I've been reading about the use of lock-ease for rifle barrels, but found very little information. I'd really like to here your thoughts on it if you use this product, what brand, when to use it, how to use it, etc. Also, do you leave this in the barrel when storing the gun for a few weeks? Thanks for your help & have a nice safe holiday. JD Southeast Texas
K22

Re: Lock-Ease for rifle barrels. Information please?

Post by K22 »

The first time I every heard of using "colloidal graphite" or the cheaper version, "lock ease" was from a new barrel/accuracy article by Greg Tannel (Gre-Tan custom rifles) who highly recommended it be used after cleaning a rifle bore. I started using it about 5 or so years ago and became quite impressed. What I have noticed the most difference is with new barrels that I used it in before ever firing a shot. The barrels were a Kimber 204 barrel (actually 2 of them) and a Lilja 17 Rem. barrel. There is literally no or next to no copper fouling. The patches come out with zero traces of copper on them. My cleaning procedure is to first use a jag and patch with a bore cleaner mixed with kroil oil, followed by a brush with the same cleaner mix on it, then wet patches, usually 3, then dry patches until the bore is dry. Then I use Wipe Out, let sit for about 45 min., patch out till dry, then 2 patches of Lock Ease, let dry, store or go shooting with it again.
Used barrels that I purchase I clean the same way, but use several applications of my cleaning solution, then Wipe Out until the patches come out completely clean. This could take many applications, even to letting the Wipe Out set in the bore for 24 hours. When its totally clean I then apply the Lock Ease. Cleaning is easier after that with the used barrels.
The idea of the graphite is to have it pushed into the pores of the barrel steel instead of copper or lead. The graphite will also leave the bore smoother.

Others may be able elaborate a bit more on this.
Last edited by K22 on Sun Dec 28, 2014 2:33 pm, edited 1 time in total.
User avatar
TEXAS222
Senior Member
Posts: 291
Joined: Sun Oct 19, 2014 8:09 pm
.204 Ruger Guns: custom build AR 15-Rem 700 .204 VARMINT- .204 Kimber Pro Var
Location: Southeast Texas

Re: Lock-Ease for rifle barrels. Information please?

Post by TEXAS222 »

K22, I like it already. What brand & where do you get it? On another note, I'm having a fit for a Kimber 84m 204, but don't know if I can live with a 3 1/2 lb. trigger. I'm used to shooting Jewells at 1 to 1 1/2 lbs. Is there an after market trigger for the Kimber that you know of? Thanks for your time & when you tell where and what lock-ease to get, I'll be using it. Merry Xmas. Jim D Southeast Texas
User avatar
Rick in Oregon
Moderator
Posts: 4942
Joined: Thu Dec 01, 2005 4:20 pm
.204 Ruger Guns: Sako 75V, Cooper MTV, Kimber 84M, Cust M700 11 Twist
Location: High Desert of Central Oregon
Contact:

Re: Lock-Ease for rifle barrels. Information please?

Post by Rick in Oregon »

JD: I also use Lock-Ease with the same noted results. It is available at most NAPA Auto Stores under the same name: "Lock-Ease". It comes as a liquid with the colloidal graphite suspended in the carrier in a small squirt bottle that is perfect for applying to a bore cleaning patch.
Semper Fortis
Rick in Oregon
NRA Life/OHA/VHA/VVA

Oregon, East of the Cascades - Where Common Sense Still Prevails

Image
User avatar
futuretrades
Senior Member
Posts: 835
Joined: Sat Aug 25, 2007 11:16 am
.204 Ruger Guns: HOWA 1500 .204 Ruger Varmint, Bull Bbl, Lupy 6-18x40 custom

Re: Lock-Ease for rifle barrels. Information please?

Post by futuretrades »

RIO turned me onto this stuff, and every time I have to clean one of my rifles, I say to myself, thank you Rick! My barrels clean up a lot faster and easier, than before I started using this product. With the amount of rounds I put thru my rifles in a day shooting "Skippy", this procedure is a dream come true. All I can say is, try it, you will like it! ;)

Thanks a whole bunch, Rick!
NRA Benefactor Life member
HOWA 1500 Varmint 204 Ruger, Bull Barrel, Hogue Overmold Stock, Leupold VXII 6-18x40mm AO LRV Custom Reticle Timney Trigger
Cooper Mdl 21 20VarTargW/Leupold VXIII, 6-20x40AO Varmint Hunter reticle.
User avatar
Rick in Oregon
Moderator
Posts: 4942
Joined: Thu Dec 01, 2005 4:20 pm
.204 Ruger Guns: Sako 75V, Cooper MTV, Kimber 84M, Cust M700 11 Twist
Location: High Desert of Central Oregon
Contact:

Re: Lock-Ease for rifle barrels. Information please?

Post by Rick in Oregon »

futuretrades wrote:RIO turned me onto this stuff, and every time I have to clean one of my rifles, I say to myself, thank you Rick!
No worries there, Kevin! This is something that was in turn told to me by an experienced shooter on another forum, then passed on here. It sure does work, especially when high-volume shooting such as our coveted "Rat Rodeo" each year. That's our buddy Kevin on his bench just to the right of the trailer wheel, raining down death to rodents in the field far below:

Image

Here you are using your popular "wet towel barrel cooling method" during that day of 96*F heat while teaching Skippy to fly:

Image

That was a good day indeed, and a very good time to use Lock-Ease in the barrel of those very toasty varmint rifle barrels during all that shooting. I'm already counting the days till spring green-up and rodents poking their little heads up in another few months! :wink:
Semper Fortis
Rick in Oregon
NRA Life/OHA/VHA/VVA

Oregon, East of the Cascades - Where Common Sense Still Prevails

Image
User avatar
TEXAS222
Senior Member
Posts: 291
Joined: Sun Oct 19, 2014 8:09 pm
.204 Ruger Guns: custom build AR 15-Rem 700 .204 VARMINT- .204 Kimber Pro Var
Location: Southeast Texas

Re: Lock-Ease for rifle barrels. Information please?

Post by TEXAS222 »

Thank all of ya'll. I bet I'll have some before it gets dark tomorrow. I envy you guys if you can shoot rats close to home, I have to travel 10 hrs. in TX to get to have fun. Merry XMAS all. JD Southeast Texas
07yzryder
New Member
Posts: 12
Joined: Wed Dec 17, 2014 10:00 am
.204 Ruger Guns: AR 15

Re: Lock-Ease for rifle barrels. Information please?

Post by 07yzryder »

Is it possible to make this at home? I have a ton of graphite and this would be a good use for it.

Does the lock ease clean and coat the barrel?
TrapperDan
Senior Member
Posts: 102
Joined: Fri Nov 23, 2012 6:51 pm
.204 Ruger Guns: remington 700 204,cz 527 american 204
Location: southern oregon

Re: Lock-Ease for rifle barrels. Information please?

Post by TrapperDan »

When you put Lock-Ease in the barrel and let it dry, do you dry patch it before you shoot .
Wolves . ISIS of the animal world
Kimber.204
New Member
Posts: 1
Joined: Fri Dec 12, 2014 10:27 am
.204 Ruger Guns: Kimber 84M Varmint
Location: Pennsylvania

Re: Lock-Ease for rifle barrels. Information please?

Post by Kimber.204 »

This sounds like an interesting use of something that is already in the garage!

For years I have used Tetra Gun gun lubricant in my .204 Ruger and my .22 Hornet.
http://www.tetraproducts.com/product_view.asp?ID=2

http://www.midwayusa.com/product/983852 ... uctFinding

I clean the bore after shooting then push a wet patch with Tetra Gun through the bore. I let it dry for a minute or two then push a dry patch through and put it in the safe for the next time. After doing this for a season I compared the velocity of my .22 Hornet with my friends. Same ammo, I have the Ruger 77/22 Hornet sporter barrel and he had that 77/22 Hornet heavy barrel. My velocity was consistently higher than his by about 50fps and that is out of a shorter barrel. I don't know if it helps in the cleaning, here in Pennsylvania we have lower volume shooting on groundhogs than you would a prairie dogs.

Does anyone have a link to any articles talking about using Lock-Ease in the bore?
K22

Re: Lock-Ease for rifle barrels. Information please?

Post by K22 »

TEJAS JD wrote:K22, I like it already. What brand & where do you get it? On another note, I'm having a fit for a Kimber 84m 204, but don't know if I can live with a 3 1/2 lb. trigger. I'm used to shooting Jewells at 1 to 1 1/2 lbs. Is there an after market trigger for the Kimber that you know of? Thanks for your time & when you tell where and what lock-ease to get, I'll be using it. Merry Xmas. Jim D Southeast Texas

Sorry I didn't get back to you sooner. What I use I get at Ace Hardware. It's called "Lock - Ease" and is in an aresol can...........product of AGS company.
I don't know of any aftermarket triggers for the Kimbers. I adjusted mine to 2 1/4lbs. very easily. I would say a gunsmith wouldn't have to much trouble getting a Kimber trigger down to 1lb. or so.
I love my 204 Montana and its accuracy.
Image

Image
Image

I like Kimbers well enough that when I got my second one in 204 I had the barrel pulled off and a 17 cal. barrel installed. I love 17 Rem. and I love Kimbers, so now I have the best of both worlds. :D

Image
TrapperDan » Mon Dec 22, 2014 12:30 am

When you put Lock-Ease in the barrel and let it dry, do you dry patch it before you shoot .
I used to TrapperDan, but dry patching before I shot and then shooting it without dry patching didn't make any difference in the point of impact.
User avatar
TEXAS222
Senior Member
Posts: 291
Joined: Sun Oct 19, 2014 8:09 pm
.204 Ruger Guns: custom build AR 15-Rem 700 .204 VARMINT- .204 Kimber Pro Var
Location: Southeast Texas

Re: Lock-Ease for rifle barrels. Information please?

Post by TEXAS222 »

K22, thank you for the information. Beautiful guns. I used to think about beautiful women, now at 62 it's beautiful guns! Have a great new year. JD Southeast Texas
User avatar
Rick in Oregon
Moderator
Posts: 4942
Joined: Thu Dec 01, 2005 4:20 pm
.204 Ruger Guns: Sako 75V, Cooper MTV, Kimber 84M, Cust M700 11 Twist
Location: High Desert of Central Oregon
Contact:

Re: Lock-Ease for rifle barrels. Information please?

Post by Rick in Oregon »

K22: Jard offers Kimber replacement triggers.

JD: 68 years here, it's been beautiful rifles for a while now here too. :wink:
Semper Fortis
Rick in Oregon
NRA Life/OHA/VHA/VVA

Oregon, East of the Cascades - Where Common Sense Still Prevails

Image
User avatar
jo191145
Senior Member
Posts: 1064
Joined: Sun Sep 25, 2005 7:23 pm
Location: Central CT.

Re: Lock-Ease for rifle barrels. Information please?

Post by jo191145 »

07yzryder wrote:Is it possible to make this at home? I have a ton of graphite and this would be a good use for it.

Does the lock ease clean and coat the barrel?
I have mixed powdered graphite with rubbing alcohol and created my own mixture. It works just fine.
For those who polish brass toss a few soft cotton patches in a pill bottle with graphite and let your tumbler coat them. Just add a few drops of alcohol before sending them down the barrel.
Same method can be used with bullet lubes for those coating bullets you just don't need a pill bottle. Toss some patches in with the bullets while coating. May need a touch more lube more than normal.

Note.
You want to make sure none of this stuff gets into your chamber and if it does you want to make sure its fully removed. Dry lubes lubricate even when dry, who woulda thunk:)
I don't have a fancy rod guide that seals the throat so I use a Hornady case gauge. Crude but effective.

Graphite will not clean your bore for you. It will help in maintaining an even fouling condition that does not fluctuate wildly. Its pretty much like coloring the inside of your barrel with a #2 pencil. The first few bullets down the bore will have a prefouled surface to ride upon.

From my experience and surprise that graphite stays in the bore fairly well through the shooting session. Pay close attention upon subsequent cleaning and you might notice when the carbon stops coming out and you get a different colored graphite coating. Of course everyone uses different powders so YMMV. If you do notice the difference feel free to stop cleaning at that point.
Image

Image
Savage VLP + NF 12x42 + 35 Bergers = .
K22

Re: Lock-Ease for rifle barrels. Information please?

Post by K22 »

TEJAS JD wrote:K22, thank you for the information. Beautiful guns. I used to think about beautiful women, now at 62 it's beautiful guns! Have a great new year. JD Southeast Texas
Your welcome. I see I'm a year ahead of you.......................darn it. :lol:

Jard offers Kimber replacement triggers.
Thanks Rick. Good information to have.

Oh, and you have us both beat at 68. :D
Post Reply