What kind of lube do you use for installing a barrel. I have used the silver anti seize for nuts and bolts but sure if it's ok for barrels .
Thanks Dan
installing a barrel
-
TrapperDan
- Senior Member
- Posts: 102
- Joined: Fri Nov 23, 2012 6:51 pm
- .204 Ruger Guns: remington 700 204,cz 527 american 204
- Location: southern oregon
installing a barrel
Wolves . ISIS of the animal world
-
wirelessguy2005
- Senior Member
- Posts: 663
- Joined: Wed Feb 24, 2010 6:59 pm
- .204 Ruger Guns: Custom 20 SCC, Savage LRPV 20 Nitro , Howa 1500 204 Ruger
- Location: Indiana
Re: installing a barrel
to my knowledge any type of anti seize should be sufficient, i have and use the silver stuff you are referring to
-
Rick in Oregon
- Moderator
- Posts: 4942
- Joined: Thu Dec 01, 2005 4:20 pm
- .204 Ruger Guns: Sako 75V, Cooper MTV, Kimber 84M, Cust M700 11 Twist
- Location: High Desert of Central Oregon
- Contact:
Re: installing a barrel
That "silver stuff" you refer to is "Never-Seeze". I've used it for over 40 years in the shop from heavy industrial use, to the threaded barrel stubs you mention. You can remove a tight barrel that's been on the action for 20 years with ease.
It's great on wheel studs too....you'll never, ever break off a wheel stud if you use the stuff when replacing lug nuts. "Good stuff"!
It's great on wheel studs too....you'll never, ever break off a wheel stud if you use the stuff when replacing lug nuts. "Good stuff"!
Semper Fortis
Rick in Oregon
NRA Life/OHA/VHA/VVA
Oregon, East of the Cascades - Where Common Sense Still Prevails
Rick in Oregon
NRA Life/OHA/VHA/VVA
Oregon, East of the Cascades - Where Common Sense Still Prevails