Savage 204 ruger Fail to Eject

[MThuntr]

I've had this Savage Model 16 in 204 Ruger for a while and haven't really shot it much except at the range.

Today I took it out and discovered that it will not eject (throw) an empty case if I pull the bolt back quickly. If I pull it slowly like I usually do at the range, it will eject. The rifle seems to want to eject before the case clears the action.

What are your thoughts?

[Joe O]

Call Customer service and request a new extractor.Not an uncomon problem.My LRPV just droped the case as soon as it cleared the chamber,The factory didn't fix it when they put on a new bolt head.I installed a new extractor,and .140 detent ball.

[acloco]

...or...remove the pin that holds the ejector piston and spring from the bolt (you will need a 0.040" punch - watch out - the spring and plunger will fly under your bench if you are not careful)....and lengthen the spring by pulling on it...just a little will do it.

[MThuntr]

Thanks guys,
I'll be giving Savage a call in the morning.