40 grain bullets in 204 / 223

General discussion and information about the 204 Ruger.
poppybull
New Member
Posts: 38
Joined: Tue Aug 04, 2009 3:26 pm
.204 Ruger Guns: none

40 grain bullets in 204 / 223

Post by poppybull »

Newbie, seeking EXPERT OPINION. I would like to shoot a 40 grain bullet at PD's. Will a 204, with a 1/12 twist hanldle this weight bullet better than a 1/9 twist 223???? Or am I making this choice too difficult and need to go buy a 204 and shoot the 32 grain ammo through it. It will be a dedicated PD gun.

Thanks for your help.
User avatar
Rick in Oregon
Moderator
Posts: 4942
Joined: Thu Dec 01, 2005 4:20 pm
.204 Ruger Guns: Sako 75V, Cooper MTV, Kimber 84M, Cust M700 11 Twist
Location: High Desert of Central Oregon
Contact:

Re: 40 grain bullets in 204 / 223

Post by Rick in Oregon »

poppy: Not sure about the "expert" part, but I think you're trying to make this harder than it really needs to be. Many 12 twist 204's shoot the 40's okay, most shoot the 39gr SBK quite well, including all three of mine (well, okay, one is an 11 twist set up just for the 39 and 40's).

A nine twist 223 should shoot the 40's okay, but you may have bullet jacket disintigration if you crank up the speed too much. A 12 twist 223 is about right for most varmint weight bullet weights available in .224", the reason most factories chamber their 223's with a 12 twist. I've got a number of 223's, and I primairly only shoot 40's in all of them for both PD's and ground squirrels (chucks too). The 40's seem to work well all the way out just past 500 yards.

Of course if you're just looking for an excuse to buy another rifle, then have at 'er bud, as you won't be dissapointed with a 12 twist 204, and will most likely be surprised that it will shoot both the 32 and the 39/40 better than you imagined. For work inside 300 yards on PD's or squirrels, the 204 32 grainers do a remarkable job....can you say "juicy"? The heavier 39gr and 40's in the 204 do their best work past the 300 yard marker, and the difference in the wind is really noticable.

It sounds like you already have the nine twist 223, so let me just say that once you move into the world of the 204, the trajectory of the 223 will be hardly missed (even when shooting the 40's) when you experience the flatness of shooting the 204. Be prepared to shoot over a bunch of dogs before you get the new trajectory into your head....it's THAT good! ;)
Semper Fortis
Rick in Oregon
NRA Life/OHA/VHA/VVA

Oregon, East of the Cascades - Where Common Sense Still Prevails

Image
OldTurtle
Senior Member
Posts: 398
Joined: Sat Jan 28, 2006 9:42 pm
.204 Ruger Guns: Savage mod. 116 and Custom .204 AR
Location: East Central MO

Re: 40 grain bullets in 204 / 223

Post by OldTurtle »

I have .223s in 1/14, 1/12, & 1/9 and all will handle the 40gr V-Max and as Rick said just keep the speed down a little in the 1/9.....I had a custom barreled AR in 1/14 made just for the lighter bullets and I can pump them up pretty good...

Both of my .204s are 1/12 twist rates and neither like the 32gr bullets, but love the 39 & 40gr pills....I've picked up some 35gr Bergers, but haven't gotten to wring them out yet, as I don't want to use the primers I have on experimentation, when I have tried and true loads for the future..

It is a good reason to consider a .204 though.... :D
AR
Image
Factory/Factory
Image
poppybull
New Member
Posts: 38
Joined: Tue Aug 04, 2009 3:26 pm
.204 Ruger Guns: none

Re: 40 grain bullets in 204 / 223

Post by poppybull »

Thank you guys for the imput, gonna go get the 204.
User avatar
chuckhunter
Senior Member
Posts: 122
Joined: Mon Sep 25, 2006 5:08 pm
.204 Ruger Guns: Savage Model 25 thumbhole, Savage Model 12
Location: BUFFALO, NEW YORK

Re: 40 grain bullets in 204 / 223

Post by chuckhunter »

You will not be sorry........ I have two because iI like it so much.
Post Reply