This is the rifle that I mentioned earlier that would have the barrel cut with a 204 Ruger Match reamer from Dave Kiff at Pacific Tool & Gauge with a "no turn" .230" neck and 11 twist to best stabilize the 39 and 40 grainers. Details:
Pac-Nor Stainless Super Match 11 twist 3-groove barrel w/11 degree target crown @ 24" long (Remington Varmint Contour - .875" muzzle)
Blueprinted stainless Remington M700 Short Action w/Hi-Score single shot follower
Jewell HVR trigger w/safety
H-S Precision Stock w/full aluminum bedding block
Leupold VX-III 6.5-20X Long Range Scope w/Varmint Hunter Reticle and M1 Elevation Turret (30mm tube & 40mm Ovjective)
Sinclair Offset 30mm Scope Level
Now I need to get out to my range to break-in the barrel, sight in, and take it out next week with my Sako M75V 204R for a four day Skippy affair. I'll break it in with Remington factory 40 grainers, then use my Sako loads for the field, and work up a dedicated load and bed it with Accraglass when time permits.
Here she is in her virgin state; test fired by Pac-Nor only:

Looks like it just might work out....

The last thing Skippy will ever see......

Next time you see her, it will be under "204 Varmint Hunting". I predict Skippy will really hate this rifle......
