Cleaning copper out of bore?

General discussion and information about the 204 Ruger.
Sask Boy
New Member
Posts: 29
Joined: Sat Mar 17, 2007 7:01 am
Location: Regina Saskatchewan Canada

Cleaning copper out of bore?

Post by Sask Boy »

Hi Guys, I am wondering if any of the readers have used a product called Wipeout supposedly it is a great foam bore cleaner and once used you will never use anything else.
I have not put a lot of rounds through the 204 yet but in a couple of weeks I hope to put a serious dent in the gopher population at my sister's farm. If you guys respond that would be great!
Keep the Son in your eyes.
Bless You
Dan
User avatar
glenn asher
Senior Member
Posts: 840
Joined: Wed Feb 09, 2005 6:25 pm
.204 Ruger Guns: Savage 12fvss, CZ 527 American
Location: kentucky
Contact:

Re: Cleaning copper out of bore?

Post by glenn asher »

Wipe-out is just what I was going to suggest, anything to lessen the number of bore strokes with a rod is a GOOD thing! Don't forget the Accelerator, too.
Build a man a fire, and he's warm for a day. Set a man on fire and he's warm for the rest of his life!
bk63044
New Member
Posts: 17
Joined: Sun Jul 29, 2007 1:25 pm
Location: St. Louis, MO

Re: Cleaning copper out of bore?

Post by bk63044 »

Works great for copper and copper only. I have many people using it and loving it.
User avatar
jo191145
Senior Member
Posts: 1064
Joined: Sun Sep 25, 2005 7:23 pm
Location: Central CT.

Re: Cleaning copper out of bore?

Post by jo191145 »

Wipe out is good stuff for copper. I would suggest cleaning the carbon out first with a mild solvent and brush. Dry the bore and foam it.
Image

Image
Savage VLP + NF 12x42 + 35 Bergers = .
User avatar
Sidewinderwa
Senior Member
Posts: 648
Joined: Mon Dec 26, 2005 9:39 am
.204 Ruger Guns: Savages
Location: Washington state

Re: Cleaning copper out of bore?

Post by Sidewinderwa »

Wipe Out is great stuff. I put a couple patches of Montana Extreme solvent down the bore first followed by a dry patch or two.
Image
Please, no Sidewinder today!
Iamsignal3
New Member
Posts: 19
Joined: Wed Apr 25, 2007 2:01 pm
Location: Michigan

Re: Cleaning copper out of bore?

Post by Iamsignal3 »

Try
http://www.frfrogspad.com/homemade.htm#Copper
If you are a DIY kinda person. I use the Ace Ammonia and at 1.90 a quart I like the price
User avatar
Keith in Ga
Senior Member
Posts: 279
Joined: Wed Oct 18, 2006 7:39 pm
Location: north Ga

Re: Cleaning copper out of bore?

Post by Keith in Ga »

I agree with the Wipe out, BUT get the "liquid" Wipe out and Accelator. I've used the foam, but you waste way more than you use. The liquid works really good, and it goes a long way. Like the others, I have used Montana Extreme, Butches, etc before the Wipe out.
ImageImage
WHISTLEPIG
Senior Member
Posts: 281
Joined: Sat Feb 18, 2006 8:09 am
Location: s. w. Idaho

Re: Cleaning copper out of bore?

Post by WHISTLEPIG »

Wipe-Out works great on copper but does not do a thorough job on carbon. I was sold for a while but I am back to a dedicated carbon cleaner and a bronze brush. I use Mercury Power Clean, but there are others that work just as well. Once the carbon is out that is on top of the copper I use the Wipe-Out. There will still be more carbon after the Wipe-Out has done its thing. Just depends how clean you want it to be.
acloco
Senior Member
Posts: 1708
Joined: Mon Sep 25, 2006 8:53 pm
.204 Ruger Guns: 12FV, 12BVSS -S
Location: Nebraska

Re: Cleaning copper out of bore?

Post by acloco »

I am also leaning towards an electric cleaner - using a steel rod, a cleaner, and a small DC voltage - drives the particles, magnetically, to the steel rod.

I use these on milsurp rifles and the results are astounding.
Post Reply