General discussion and information about the 204 Ruger.
choc-dog
New Member
Posts: 2 Joined: Tue Feb 07, 2006 6:34 pm
Post
by choc-dog » Mon Jan 22, 2007 5:44 pm
I have a T/C pro hunter 204 barrel for my sons pro hunter. Hope it shoots
as well as your T/C contender
P.S. Is that a factory barrel???
skipper
Moderator
Posts: 1404 Joined: Thu Feb 09, 2006 3:32 am
.204 Ruger Guns: Remington XR 100, Custom build Lilja/Panda/Shehane/Jewell
Location: Cypress, TX
Post
by skipper » Mon Jan 22, 2007 7:10 pm
Hold 'em & Squeeze 'em
contender hunter
Junior Member
Posts: 88 Joined: Sun May 01, 2005 6:49 am
.204 Ruger Guns: Thompson Contender 23'' Bull BBL. Custom laminate Stock
Location: Northeast Pa.
Post
by contender hunter » Mon Jan 22, 2007 8:05 pm
Yup ,factory bull barrel 23''
Lee C.
Senior Member
Posts: 356 Joined: Fri Apr 21, 2006 12:00 am
Location: antigo wisconsin
Contact:
Post
by Lee C. » Tue Jan 23, 2007 2:22 am
Great looking job you did there contender hunter.
contender hunter
Junior Member
Posts: 88 Joined: Sun May 01, 2005 6:49 am
.204 Ruger Guns: Thompson Contender 23'' Bull BBL. Custom laminate Stock
Location: Northeast Pa.
Post
by contender hunter » Tue Jan 23, 2007 6:18 am
Thanks Lee , it nice when they turn out the way you planned , especially after all the time and work you put into them!!!!
trevort
Junior Member
Posts: 98 Joined: Fri Nov 11, 2005 5:01 am
.204 Ruger Guns: stiller predator, lilja no 5 1 in 12
Location: Melbourne Australia
Post
by trevort » Mon Jan 29, 2007 7:58 pm
Nice job on the rifle, loading and shooting!
Is that a Boyd stock. Looks like the pattern I want for a 20 practical carry rifle.
contender hunter
Junior Member
Posts: 88 Joined: Sun May 01, 2005 6:49 am
.204 Ruger Guns: Thompson Contender 23'' Bull BBL. Custom laminate Stock
Location: Northeast Pa.
Post
by contender hunter » Mon Jan 29, 2007 8:14 pm
Trevort , its a (gunstocks inc.) stock , all there stocks are un- finished and mine required alot of work to get the wood to fit the stock properly , I was disapointed in the wood to metal clearances but they said there wasn't anything they could do about it and a replacement would be the same . Boyds does offer finished stocks if thats what your looking for.