Suppressors

Talk about hunting the hunters and their prey.
jsh
Junior Member
Posts: 65
Joined: Sun Oct 08, 2017 5:29 pm
.204 Ruger Guns: Encore, savage LRPV

Suppressors

Post by jsh »

Looking for input on suppressors.
TIA
Jeff
randyman
Senior Member
Posts: 228
Joined: Fri Aug 19, 2016 1:04 pm
.204 Ruger Guns: .204 on AR platform, .20 Vartarg built from Rem. 700 SA
Location: Butte and Lassen counties in Northern Calif.

Re: Suppressors

Post by randyman »

Unfortunately, no bueno here in smoky N.Calif.
User avatar
Rick in Oregon
Moderator
Posts: 4942
Joined: Thu Dec 01, 2005 4:20 pm
.204 Ruger Guns: Sako 75V, Cooper MTV, Kimber 84M, Cust M700 11 Twist
Location: High Desert of Central Oregon
Contact:

Re: Suppressors

Post by Rick in Oregon »

jsh wrote: Mon Aug 16, 2021 8:01 pm Looking for input on suppressors.
TIA
Jeff
Well there, Jeff, exactly what type of input are you looking for?
Semper Fortis
Rick in Oregon
NRA Life/OHA/VHA/VVA

Oregon, East of the Cascades - Where Common Sense Still Prevails

Image
User avatar
jpx2rk
Senior Member
Posts: 128
Joined: Sun Aug 14, 2016 5:25 pm
.204 Ruger Guns: Savage 12FV, R783/20P combo
Location: East TN

Re: Suppressors

Post by jpx2rk »

I have a 204R and 20P, with my Harvester 300, both sound and feel (recoil) like a mouse fart. I've shot the 20P with a buddy's 22 cal DIY suppressor and my Harvester, very little difference in the felt recoil, mine is a just a bit quieter.
Master Piddler ;)
User avatar
Rick in Oregon
Moderator
Posts: 4942
Joined: Thu Dec 01, 2005 4:20 pm
.204 Ruger Guns: Sako 75V, Cooper MTV, Kimber 84M, Cust M700 11 Twist
Location: High Desert of Central Oregon
Contact:

Re: Suppressors

Post by Rick in Oregon »

Okay, but is there a question in there somewhere? That input you mentioned?
Semper Fortis
Rick in Oregon
NRA Life/OHA/VHA/VVA

Oregon, East of the Cascades - Where Common Sense Still Prevails

Image
jsh
Junior Member
Posts: 65
Joined: Sun Oct 08, 2017 5:29 pm
.204 Ruger Guns: Encore, savage LRPV

Re: Suppressors

Post by jsh »

I was wondering what folks were using.
Even open to what to stay away from.
It’s a fair chunk of money to throw at something that has little if anything to do with accuracy.
I ended up going with a Griffin Paladin 300. Rated for 22RF through 300WM.
After using a 5.56 and a 30 suppressor on the same rig and ammo, wasn’t enough to sway me towards a smaller “hole”.

I also shoot a fair bit of cast bullets. Nothing threaded at this point in anything I shoot CB’s in, but maybe in the future, so I have that option since this one can be taken apart for cleaning.
Post Reply